How to apply the patch in oracle 12 c
Hello
Is there a correct way to apply a patch in oracle 12 c.
Database is up and running (in open mode / read, write)
No application is connected to the database
But it seems that his is not successful.
[oracle@localhost 19504744] $ opatch apply
Setup Oracle interim Patch version 12.1.0.1.10
Copyright (c) 2015, Oracle Corporation. All rights reserved.
Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1
Inventory Center: / home/oracle/app/oraInventory
from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc
OPatch version: 12.1.0.1.10
YES version: 12.1.0.2.0
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
Check the environment and performing preliminary controls...
Skip patch 19504744 list of patches to apply: this patch is not required.
After ignoring the patches with missing components, there are no patches to apply.
OPatch Session is complete warning.
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:06:59] OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»
[December 7, 2015 02:06:59] Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil
[December 7, 2015 02:06:59] YES-67077:
Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1
Inventory Center: / home/oracle/app/oraInventory
from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc
OPatch version: 12.1.0.1.10
YES version: 12.1.0.2.0
YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:06:59] History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
[December 7, 2015 02:07:01] [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)
[December 7, 2015 02:07:01] Check the environment and performing preliminary controls...
[December 7, 2015 02:07:01] Checking for conflicts between the colonies...
[December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Adapter can go list: 19504744
[December 7, 2015 02:07:01] Not need adapter list:
[December 7, 2015 02:07:01] List of self-catering maps:
[December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Intra-conflict control PASSED
[December 7, 2015 02:07:01] Checking whether Oracle Home has components required by tasks...
[December 7, 2015 02:07:01] Check if the "19504744" patch is a patch of no-op.
[December 7, 2015 02:07:01] Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0
[December 7, 2015 02:07:01] [oracle.rdbms, 12.1.0.2.0]
Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.
[December 7, 2015 02:07:01] CheckMissingComp: hash match, re - build SWFs
[December 7, 2015 02:07:01] YES-67124:
After ignoring the patches with missing components, there are no patches to apply.
[December 7, 2015 02:07:01] UtilSession: N-apply is.
[Dec 7, 2015 2:07:01 AM] --------------------------------------------------------------------------------
[December 7, 2015 02:07:01] The following warnings occurred during execution of OPatch:
([7 December 2015 02:07:01] 1) YES-67124:
After ignoring the patches with missing components, there are no patches to apply.
[Dec 7, 2015 2:07:01 AM] --------------------------------------------------------------------------------
[December 7, 2015 02:07:01] YES - 67008:OPatch Session is complete warning.
[December 7, 2015 02:07:01] Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:07:01] YES - 67008:OPatch Session is complete warning.
1. not a correct way to apply the patch
2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)
Look in your current patch its not needed
Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)
Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).
Update:
Check the environment and performing preliminary controls...
Jump list of patches to apply 19504744 patch : this patch is not necessary.
Clearly it indicating information
-Pavan Kumar N
Tags: Database
Similar Questions
-
How to apply the theme of Oracle Alta UI in ADF
Hi all
I use Jdeveloper 11.1.1.1.7.2 release1.
Can anyone provide your inputs on how to apply the theme of Oracle Alta UI in the ADF.
For any consultation on Alta IU @ http://www.oracle.com/webfolder/ux/middleware/alta/start-develop.html
Thank you and best regards,
Miko Auntie.
http://www.Oracle.com/WebFolder/UX/middleware/Alta/start-develop.html
http://www.Oracle.com/WebFolder/UX/middleware/Alta/patterns/PageDesign.html
http://www.Oracle.com/WebFolder/UX/middleware/Alta/new-dev-w-Alta-skin.html
-
Dear friends,
My current database is 10.2.0.1.0. I checked my setting compatible file init.
I would ask my patch to upgrade to 10.4.
Its a file exe and when I run I don't know if I should install it in the same folder and the same House. I tried different location House and different but it says that it must be in the current House.
Otherwise, it shows errors awt.dll is not available, written by another process. I did stop my database and stop all the necessary services.
I also tried to use the same location but different host.
Please guide me on how to go about it.
I'm working on Windows Server 2003, Enterprise Edition.
Thank you.
Published by: user645399 on 24 Sep, 2010 09:53user645399 wrote:
If my existing Oracle home is Ora1 and located at c:\oracle\products\db_1, can I install this patch exactly at the same House and the same?Yes. In fact, the section that you pasted said to do exactly this.
You must install it in an existing base of Oracle 10 g Oracle home.
The reason for which you found the file misuse is probably because you have some software running that uses binary files in the Oracle home. This could be a database, customer, no matter what.
If you really believe that you have everything off then the next action plan, I would recommend would be to put Windows Services to manual and reboot the server. So try and apply the patch. I've seen this behavior before in a Windows environment.
-
How to apply the patch to power supply in an environment of dataguard
I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.
Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.
In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.
To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:
1 reporter on the primary to the standby log shipping.
2 cancel the MRP on the standby database.
3. apply the patch of power supply on the standby server. -See the Readme for instructions.
4. ensure that the standby db is mounted and the earpiece is in place on the standby server.
5. do not run any script correction on the standby database.
6. apply the patch of power supply on the principal server.
7. make sure that your primary database and the listener on the primary server is running.
8 turn on the primary to the standby log shipping.
9 start the MRP on the standby database.
10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.
Please refer to this
How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)
Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao
HTH
-Jonathan Rolland
-
How to apply the PSU on Oracle RAC?
Hello guys,.
How about the Oracle RAC database without any stop PSU? (patch only database, not clusterware).
Lets say I have 2 CCR node on different hosts with separate houses oracle/grid (no shared resources). What are the steps to avoid blackouts? I simply apply the last OPatch on grid/oracle homes, and then generate the oracle user ocm.rsp file and simply run as root: opatch auto/patch/path /-oh oracle_home - ocmrf /path/ocm.rsp and he will do everything for me on this node? then move service on node patched and do the same on another node? Oh, and there will be no interruption of service? Thank you!
Gytis
Hello
Yes, the concept of a rolling patch is that the DB will always be upward, albeit on a node or another (or maybe 2 of 3, etc.)
Check out this doc, spec 14.2.4 reduce planned downtime Maintenance
Essentially an instance will come down in time. You can either manually a node patch or another, or well let Oracle patch bearing (but make sure you test it in the configuration of test first, if you have one, or else we put up with the same group of patches just in case).
The idea is that the VIP relocate Node2, or if you use SCAN apps will detect node1 down.
If possible, it is good to do this with a team Apps - ask them to move the connection with Betclic / application servers to the next node in the cluster, then the first patch (rolling patch), then exchange all node1 and make the node 2.
The same steps apply for clusterware.
See you soon,.
-
How to apply the patch for Hyperion System 11.1.1.3?
Hi all
We are on Hyperion System 11.1.13 and we intend to switch to IE8 by the company. I know that there is a possible problem with IE8 with space work and financial information. When I did the research, it shows that we must apply the following hotfixes. I've done system Hyperion 11 facilities several times but I never have patches. Difficult to apply patches and correct possible risks if we do not? can someone please post how to apply patches?
EMP Workspace (with patch 9314073), Financial Reporting (with patch 9657652).
Thank youOpatch backup means more likely to make a backup of the phone book file Opatch, regarding installing the patch instructions must be reading me.
See you soon
John
http://John-Goodwin.blogspot.com/ -
How to apply the Patch to install CD
I would like to integrate fixes from build 515841 on a CD (in fact, a USB key) trying to install ESXi5 469512 transformation.
Is this possible?
What is the purpose of the 'UPGRADE' on the CD directory. Could it be used to update an installation? Its content looks like a zip of maintenance.
You can use to create an ESXi installation with a custom set of ESXi image updates and patches using ESXi Image Builder CLI.
See the link below
-
Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error
AutoPatch error:
You must be in Maintenance Mode to apply the patches.
You can use the AD Administration utility to set the Maintenance Mode.
I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.
How I applied the patch
source, run fs
adoption phase = apply patches = 18345006 = no allnodes
The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.
Apparently, the maintenance mode error is just a smoke screen
-
Hi all
How to apply a patch on Oracle, cananybody give me all the steps...Here are some of the steps to apply a patch on oracle 9i (9.2.0.7)
Note: These are pre-installation steps that should be made just before the maintenance window beginsMake sure you have Perl perl 5.00503 (or later version) - v
You must use OPatch version 1.0.0.0.54 or later.
Check the current version:$ORACLE_HOME/OPatch/opatch version
If not, install it. In the $ORACLE_HOME directory copy the p2617419_10102_GENERIC.zip and unzip the latter:CP p2617419_10102_GENERIC.zip $ORACLE_HOME.
MV $ORACLE_HOME/OPatch/$ORACLE_HOME/OPatch.bak
CD $ORACLE_HOME
unzip p2617419_10102_GENERIC.zip
Recheck the current version and if it works:$ORACLE_HOME/OPatch/opatch lsinventory
Before you start the installation check if 'java' and 'jar' executables are present in your Oracle home. In a standard Oracle, 'java' facility is available in $ORACLE_HOME/jre/bin directory and 'pot' is available in $ORACLE_HOME/jdk/bin directory.
ls-l $ORACLE_HOME/jre /
"/ bin"
ls-l $ORACLE_HOME/jdk/bin
If you do not have a standard installation and these commands are not present, then call the command "opatch apply" with the flag - jdk, by specifying the full path to the JDK to use.Check if the following executables must be present in the $PATH: brand, ar, ld, and nm.
Copy the file p4751923_92070_LINUX.zip to the directory of your oracle database, unzip it there and go to the 4751923 subdircetory.
unzip p4751923_92070_LINUX.zip
CD ~/4751923--------------------------------------------------------------------------------
NOTE: The amount of Service downtime starts hereStop all the instances and headphones associated the ORACLE_HOME updated: lsnrctl stop
sqlplus "/ as sysdba";
SQL > shutdown immediate;
SQL > "exit";Apply the CPU:
$ORACLE_HOME/OPatch/opatch apply
If you encounter errors, please see the "Known issues" section of the 343384.1 document.
Start up of all instances of database running on the ORACLE_HOME being patched and run a post-installation script.
CD $ORACLE_HOME/cpu/CPUJan2006
sqlplus "/ as sysdba";
SQL > startup;
SQL > select OBJECT_NAME from DBA_OBJECTS where status = 'INVALID ';
SQL > @catcpu.sql;
SQL > "exit";
Examine the log file. If you encounter errors, please see the "Known issues" section of the 343384.1 document.If catcpu.sql reports all invalid objects, compile invalid objects by using the following:
CD $ORACLE_HOME/rdbms/admin
sqlplus "/ as sysdba";
SQL > @utlrp.sql
Check again if invalid objects:SQL > select OBJECT_NAME from DBA_OBJECTS where status = 'INVALID ';
SQL > "exit";Start the listener: lsnrctl start
-
Dear all,
I installed oracle 10g 10.1.2.0.2 with infrastructure and forms & report application server.
now, I downloaded the Patch 10.1 . 2.3 to apply to this topic
I have two houses in my application server 10g (infra and forms & report).
should I apply first to apply the patch on infrastructure and on forms & apartment house.
am I right. ? can you please give me the procedure how to apply the hotfix on the server of applications 10g 10.1.2.0.2.
Thank you and best regards,
Shir khanYes, it's true :-)
-
The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7. Update Windows shows about 100 updates important to apply. I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list. I don't understand why this is. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with?
Thank you
Hello
I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.
For more information, take a look at the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
-
How to apply the 9874305 patch
Hi all
I must apply the patch 9874305 .
Read me file that I found no instructions how to apply this hotfix, even on applications of services should be upwards or downwards.
Here's this file
Help, please
Kind regards.Salvation;
can we apply this action plan onlline productuion instance is turned?
All first please do not post details of notes metalink on a public place because of the interoperability pollicy, thatswhy Please edit your first post.
Secondlyi the readme file does not, you must close your apps services but either incidentally, I recommend nearby services and apply the fix. Second present before patch be sure whether or not you have 6372396 on your system. If you are at this level or higher
1. close apps services
2. use adadmin and take your system in mode manitanance
3. fix appy using adadmin utulity
4 turn off the manitanance mode
5 open services
6. check simultaneous and run only one application and make sure that its compliatedRespect of
HELIOS -
How to apply RUP6 (patch 6728000) during the installation of the single node?
Dear
On single node configuration, we have installed Oracle Apps R12.0.4. Now I need to apply RUP6 (patch 6728000). In what order should I apply the patch? According to my knowledge "u*.drv" type patches must be applied to both AS & DB level. I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process. After that, I have to apply this hotfix on DB also stop DB &?
Need help!
ConcerningNaya,
I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process.
Fix.
After that, I stop DB & also the application of this fix on DB?
No, because you have already applied the patch as a user applmgr and already patched the application layer as well as the database layer. Thus, simply disable maintenance mode, start the services application, and access the application.
Make sure that you follow all the steps in the Readme of the patch and (Note: 743368.1 - Oracle E-Business Suite Release Update Pack Readme, release 12.0.6).)
-
Strange worker has no reasons when applying the patch 17529626
Dear all,
I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:
1:
An error occurred during re-Association of the application programs.
Continue as if it was successful [No.]: Yes
I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.
2: after spending the step that precedes the adpatch blocks in the following lines:
IMPOSSIBLE: folder ap_holds_all.xdf worker 1.
IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.
ATTENTION: Fix the worker failed above the Manager to continue.
I checked the logs of the worker, and I got the following:
1:
INFO: An additional column ATTRIBUTE7 exist in the target database
INFO: An additional column ATTRIBUTE8 exist in the target database
INFO: An additional column ATTRIBUTE9 exist in the target database
INFO: An additional column LAST_UPDATED_BY exist in the target database
The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column
WARNING: The missing column is NOT NULL and there is no default to apply
Add a nullable column with the statement
Executing statement
ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)
Start time for the above statement is kills Sep 20 23:42:21 THIS 2015
End time for the above statement is kills Sep 20 23:42:21 THIS 2015
Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)
Error message is ORA-01430: column being added already exists in the table
Error code is 1430
==========================================================
Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]
Update task with status 1
AD worker error:
The utility FndXdfCmp returned the error for the task above.
AD worker error:
The above program has failed. See the error messages listed
above, as appropriate, or look at the log files and output of the program.
When the worker has no time: Tuesday, October 20, 2015 23:42:21
Assignment 2:
INFO: An additional column ATTRIBUTE7 exist in the target database
INFO: An additional column ATTRIBUTE8 exist in the target database
INFO: An additional column ATTRIBUTE9 exist in the target database
The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1
Executing statement
ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)
Start time for the above statement is kills Sep 20 23:41:59 THIS 2015
End time for the above statement is kills Sep 20 23:41:59 THIS 2015
Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)
Error message is ORA-01430: column being added already exists in the table
Error code is 1430
==========================================================
Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]
Update task with status 1
AD worker error:
The utility FndXdfCmp returned the error for the task above.
AD worker error:
The above program has failed. See the error messages listed
above, as appropriate, or look at the log files and output of the program.
When the worker has no time: Tuesday, October 20, 2015 23:41:59
So I checked the two tables for these columns:
DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists
DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists
Now, I'm confused and I don't know how to solve this problem, please help?
In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!
Thank you very much for your help!
Concerning
Moussa
Please check
Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)
Patch is different but the error is the same
concerning
Pravin
-
Hi all
I am new to ORACLE RAC, I just want to know how to install or upgrade existing oracle 11 GR 2 on CARS.
We have RAC on solaris 10 64-bit. Here is the result of the database instance.
SQL > SELECT * FROM SYS. V_$ ACTIVE_INSTANCES;
INST_NUMBER INST_NAME
----------- ------------------------------------------------------------
1 testdev1:DEVT1
2 testdev2:DEVT2
So on sever testdev1 whe running instance DEVT1 and break in testdev2 DEVT2 is running.
Current database version is 11.2.0.1.0... I want to update, or apply the patches 11.2.0.2.0 scheme.
I want to do the upgrade out of Place (i.e. create new oracle home and install oracle)
I successufully standalone update DB (No. CARS) but I'm not having experience in the CCR.
Can you please guide me, or send me the link of the document that I follow to upgrade database RAC 11.2.0.1 to 11.2.0.2.0
See you soon.MOS Doc-things to consider before moving to 11.2.0.2 Grid Infrastructure/ASM [ID 1312225.1]
Steps to upgrade 11.2.0.1 RAC to 11.2.0.2
http://abbasocp.blogspot.in/2012/03/steps-to-upgrade-11201-RAC-to-11202.html
http://askdba.org/weblog/2010/10/steps-to-upgrade-11201-RAC-to-11202/
Maybe you are looking for
-
Watch the OS 2.2 &; Hey Siri
After the upgrade to iPhone OS 9.3 and Watch OS 2.2, raise my wrist saying "Hey siri," is no longer working or active Siri. Siri only lights after the digital Crown. Any suggestions? Thank you!
-
I am very confused because I upgraded to a 1st generation Moto X of the new Moto G, but Assist is completely different now and there is no option for drive Mode to speak text and automatically by default the telephone in speakerphone mode when answer
-
The updates are: Update of security for Microsoft Works 8 (KB973636) Update of security for Microsoft Office Excel 2007 (KB973593) Update of security for the viewer Microsoft Office Visio 2007 (KB973709) Update of security for Microsoft Office System
-
I'm having a problem with window Live Messenger
Im having trouble getting in windows live Messenger
-
Movie Maker - how to restore a lost file?
Apparently if you put a Toshiba laptop to sleep while running Movie Maker, it crashes. As a result, I lost the file where I worked on all day - for a project that is tomorrow. I saved the file several times while I've been working on this, but sinc