Records of range tax Yes date

Similar Questions

• How can I search for files in a range of digital data

  Is there a way to specify a range of digital data in Windows 7 search for example File1 through deposer10 included

  Thank you

  So you're saying that file names could be, for example, hotdog4.txt for hotdog15.txt?  Well, you can look for in an orderly series, numerically and alphabetically, with two periods between the first and the last item, as in name:hotdog4.txt... hotdog15.txt

  Interestingly, Windows by default notice when the names correspond to a digital frame and so will sort hotdog4 to hotdog10 and so on, despite 4 being a number greater than 1 Prime figure 10.  I found a reference to this topic (but do not disable anything probably, just for the pleasure of reading):

  http://www.askvg.com/how-to-disable-numerical-file-name-sorting-and-enable-classic-literal-sorting-in-Windows-XP-Vista-and-7-Explorer/

• Recording of Split on the date range

  Hello!
  
  I use oracle 10g Standard Edition. I have following the set of records in a table T1 maintain periods of leave in it.
  

  empno startdt    enddt
  12    15/12/2009 28/12/2009
  12    10/01/2010 25/03/2010
  12    30/03/2010 18/04/2010
  34    05/02/2010 20/02/2010
  34    01/03/2010 15/03/2010
  86    11/11/2009 29/07/2010
  .
  .
  .

  The number of records by empno varies and can be from 1 to n. I want the output like below:
  

  empno startdt    enddt
  12    15/12/2009 28/12/2009
  12    10/01/2010 31/01/2010
  12    01/02/2010 28/02/2010
  12    01/03/2010 25/03/2010
  12    30/03/2010 31/03/2010
  12    01/04/2010 18/04/2010
  34    05/02/2010 20/02/2010
  34    01/03/2010 15/03/2010
  86    11/11/2009 30/11/2009
  86    01/12/2009 31/12/2009
  86    01/01/2010 31/01/2010
  86    01/02/2010 26/02/2010
  .
  .
  .

  I tried searching the forum but could not find a relevant answer. Any help is appreciated.
  
  UMESH

  Hello

  umesh19 wrote:
  Hello!

  I use oracle 10g Standard Edition. I have following the set of records in a table T1 maintain periods of leave in it.

  What version (e.g. 10.2.0.3.0)? The version is more important in you giving a good response than that of the edition.
  The solution below works in Oracle 9 (and), but could be modified to work in Oracle 8.1.

  empno startdt    enddt
  12    15/12/2009 28/12/2009
  12    10/01/2010 25/03/2010
  12    30/03/2010 18/04/2010
  34    05/02/2010 20/02/2010
  34    01/03/2010 15/03/2010
  86    11/11/2009 29/07/2010
  .
  .
  .
  

  Always post your sample data in a form that people can use to recreate the problem and test their ideas.
  For example:

  CREATE TABLE     table_x
  (     empno     NUMBER (4)
  ,     startdt     DATE
  ,     enddt     DATE
  );
  
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (12,    TO_DATE ('15/12/2009', 'DD/MM/YYYY'), TO_DATE ('28/12/2009', 'DD/MM/YYYY'));
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (12,    TO_DATE ('10/01/2010', 'DD/MM/YYYY'), TO_DATE ('25/03/2010', 'DD/MM/YYYY'));
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (12,    TO_DATE ('30/03/2010', 'DD/MM/YYYY'), TO_DATE ('18/04/2010', 'DD/MM/YYYY'));
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (34,    TO_DATE ('05/02/2009', 'DD/MM/YYYY'), TO_DATE ('20/02/2010', 'DD/MM/YYYY'));
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (34,    TO_DATE ('01/03/2010', 'DD/MM/YYYY'), TO_DATE ('15/03/2010', 'DD/MM/YYYY'));
  INSERT INTO table_x (empno, startdt,                      enddt)
       VALUES          (86,    TO_DATE ('11/11/2009', 'DD/MM/YYYY'), TO_DATE ('29/07/2010', 'DD/MM/YYYY'));
  COMMIT;
  

  The number of records by empno varies and can be from 1 to n. I want the output like below:

  empno startdt    enddt
  12    15/12/2009 28/12/2009
  12    10/01/2010 31/01/2010
  12    01/02/2010 28/02/2010
  12    01/03/2010 25/03/2010
  12    30/03/2010 31/03/2010
  12    01/04/2010 18/04/2010
  34    05/02/2010 20/02/2010
  34    01/03/2010 15/03/2010
  86    11/11/2009 30/11/2009
  86    01/12/2009 31/12/2009
  86    01/01/2010 31/01/2010
  86    01/02/2010 26/02/2010
  .
  .
  .
  

  Explain how you get the desired results based on data you've posted.

  I tried searching the forum but could not find a relevant answer. Any help is appreciated.

  What you're looking for? Which could give us some clues as to what you want.
  What have you tried yourself?

  If you would like each input line to split into one or more production lines, each for a single calendar month, then follow these steps:

  WITH     all_months     AS
  (
       SELECT     ADD_MONTHS (firstdt, LEVEL - 1)          AS startdt
       ,     ADD_MONTHS (firstdt, LEVEL    )     - 1     AS enddt
       FROM     (
                 SELECT     TRUNC ( MIN (startdt)
                            , 'MONTH'
                            )          AS firstdt
                 ,     MAX (enddt)     AS lastdt
                 FROM     table_x
            )
       CONNECT BY     LEVEL <= CEIL ( MONTHS_BETWEEN ( lastdt
                                       , firstdt
                                       )
                            )
  )
  SELECT       empno
  ,       GREATEST (t.startdt, m.startdt)     AS startdt
  ,       LEAST    (t.enddt,   m.enddt  )     AS enddt
  FROM       table_x          t
  JOIN       all_months     m     ON     t.startdt     <= m.enddt
                      AND     m.startdt     <= t.enddt
  ORDER BY  empno
  ,       startdt
  ;
  

• record channel times of order data NI_DataType

  I'm trying to replicate some features of selection of the control Data Logging property in the VeriStand workspace in a Labview application (I wish I could get just the VI for control of the workspace).  In the control of the registration of the properties-> channel category data the time channel can be selected.  When I select absolute time he records the system path = 'targets, controller, channels, Absolute System Time. "  But I have one property TDMS NI_DataType = 68.  If I manually select the channel (add channels) we obtain a = 10 NI_DataType.  The difference seems to be that the NI_DataType = 68 has the well formatted time (m/d/Y/min) while the NI_DataType = 10 at a time in a large number that represents the number of seconds.  The NI_DataType is read-only.  How can I get the formatting nice NI_DataType = 68 to be registered like that?  This post is treated?  If so how to do that?

  Thank you!

  I have found that the Group of channels TDMS (NI_VS Data logging API.lvlib) type def that gets wired for the new Data Logging Specification.vi has a def of time type of the channels Options which allow channels different time to be configured and named.

• try to set a range for my data

  Hello I'm trying to set an upper and a lower limit of my data table. I don't get the results I want, so I wonder if I use it correctly?

  Yes. Remember that arrays are zero based on LabVIEW.

• Best way to record 50 kech. / s data to the file

  I'm reading a data acquisition data at a sample rate of 50 kech. / s and save it in a file. My application must run for at least a few hours. At first, I tried a model of loop of consumer-producer with a writing on measurement file Express VI, but he wrote the data too slowly, and my queue. Now, I'm trying to use the Write to VI file spreadsheet with or without a loop of producer-consumer model (see attached screws). Both seem to write data to the file, but no written records the number of datapoints I expect (the two have a lot less datapoints).

  What is the best way to write data to the file? Seems like a basic question, so if it has already been discussed in detail in another forum, or if there are examples of what someone could point me to, that would be appreciated also.

  Thank you!

  Hvea look at "stream directly to disk with TDMS in LabVIEW".

• Record JPG with the wrong date

  When I save a PSD file, he recorded with the date and the current time today, but when I "save under" a JPG file, it's save my computer first started when I got it with the date and time. What happens to all THE jpg files. Ones I saved yesterday and today have the same date and time. (I started having to set the date and time in my file name!)

  I'm on Windows 10.

  Thanks in advance for any help!

  The screen 'Open' uses Windows Explorer, so it's definitely a Windows problem.

  Try this:

  On the title bar, just above the list of files/folders (Date, Type, size) right click on the empty part of the bar and look at the context menu.

  You should see a list of the types of possible columns, the checkmarks on the possible options. There are more than 15 available date types. Try to create another column with another date than the simple 'Date' type, you now by checking the box. See if other dates are displayed.

• A-team Mobile persistence Accelerator - Insertion into the child records for a Parent-child data objects

  Hello team

  We use persistence Mobile Accelerator for our application of MAF. We must build couple of REST services for it (Fetch, Create, Update), problem is we are able to insert/update of the parent records but we are not able to create child records.

  It seems when we ask the operation of creation in the book of the child, is no new line for child is created.

  Here is the screenshot of the data control wizard:

  

  Here is the task (update) and desktop (create) JSON format (TaskAssignment is the address of the child)

  PUT the task:

  {

  'Task': {}

  'ACTIVITY_ID': 100,.

  'PROJECTID': 100,.

  'ACTIVITY_NAME': "string",.

  'DESCRIPTION': 'string ',.

  'PARENT_ACTIVITY_ID': 100,.

  'STATUS': "string",.

  'PRIORITY': "string",.

  'PERCENTAGE_COMPLETE': 100,.

  "START_DATE": "2008-09 - 28 T 21: 49:45.

  "END_DATE": "2014-09 - 18 T 19: 18:33.

  'ETA': ' 2006-08 - 19 T 13: 27:14 - 04:00 ",".

  'ESTIMATED_HOURS': 100,.

  'ACTUAL_HOURS': 100,.

  'OWNER_USER_ID': 100,.

  'CREATED_BY': "string",.

  "CREATION_DATE': ' 2009-05 - 16 T 08: 42:28"

  'LAST_UPDATED_BY': 100,.

  'LAST_UPDATE_DATE': ' 2003-08 - 08T 20: 18:37 - 04:00 ",".

  "TaskAssignment": [{}

  'ASSIGNMENT_ID': 1000.00.

  'PROJECT_TEAM_MEMBER_ID': 1000.00.

  "START_DATE": "2012-09 - 13 T 09: 00:34 - 04:00", ".

  "END_DATE": "2009-10 - 14 T 03: 16:36."

  'CREATED_BY': "string",.

  'CREATION_DATE': ' 2010-03 - 18 T 12: 05:32.

  'LAST_UPDATED_BY': "string",.

  "LAST_UPDATE_DATE": "2018-12 - 28 T 14: 51:14 - 05:00", ".

  'FAVORITE_FLAG': "string".

  } ]

  }

  }

  Workstation:

  {

  "Task": [{}

  "ACTIVITY_ID": 1000.00.

  'PROJECTID': 1000.00.

  'ACTIVITY_NAME': "string",.

  'DESCRIPTION': 'string ',.

  'PARENT_ACTIVITY_ID': 1000.00.

  'STATUS': "string",.

  'PRIORITY': "string",.

  'PERCENTAGE_COMPLETE': 1000.00.

  "START_DATE": "2008-09 - 28 T 21: 49:45.

  "END_DATE": "2014-09 - 18 T 19: 18:33.

  'ETA': ' 2006-08 - 19 T 13: 27:14 - 04:00 ",".

  'ESTIMATED_HOURS': 1000.00.

  'ACTUAL_HOURS': 1000.00.

  'OWNER_USER_ID': 1000.00.

  'CREATED_BY': "string",.

  "CREATION_DATE': ' 2009-05 - 16 T 08: 42:28"

  'LAST_UPDATED_BY': "string",.

  'LAST_UPDATE_DATE': ' 2003-08 - 08T 20: 18:37 - 04:00 ",".

  "TaskAssignment": [{}

  'ASSIGNMENT_ID': 1000.00.

  'PROJECT_TEAM_MEMBER_ID': 1000.00.

  "START_DATE": "2012-09 - 13 T 09: 00:34 - 04:00", ".

  "END_DATE": "2009-10 - 14 T 03: 16:36."

  'CREATED_BY': "string",.

  'CREATION_DATE': ' 2010-03 - 18 T 12: 05:32.

  'LAST_UPDATED_BY': "string",.

  "LAST_UPDATE_DATE": "2018-12 - 28 T 14: 51:14 - 05:00", ".

  'FAVORITE_FLAG': "string".

  } ]

  } ]

  }

  Please let me know if I missed all the details.

  Waiting for answer!

  Thank you

  Diprish

  Massari,

  Task.Java seems good. The question is: how to create the new instance of task assignment in the UI?

  That's what you do: you must use the create operation standard of the palette of the title of the collection of nested task assignment data control. Thus, enrich the collection of task, the collection taskAssignment nested in the task, expand the node of the operations and drag and drop the operation of creation on your page. This should add the new instance to the collection of the current task task assignment. To make sure that this is the case, set a breakpoint in the addTaskAssignment method in Task.java. Then, when you save the parent task, load useful json must include a table nested with the new task assignment.

  Steven Davelaar,

  Oracle Mobile A-team.

• Sort records by using the approval date in HRMS

  HII All
  
  I have a table that displays the records after search
  on the search page
  
  now, I want to add a column over at the end of this table which shows the date of approval
  This approval approved by a Director with different ID and password
  
  How can I see the date of approval of the vacancy?
  
  
  and I also want to show a drop down list with options ascending and descending
  on this basis the column date of approval must be sorted
  
  How can I achieve this?

  Hello

  If the display attributes are available in VO (responsible for display in the columns of the table) to the corresponding fields, you can

  1.) create the areas through customization.
  2.) extend the controller and order by condition dynamically in the PFR on the VO responsible to display the value in the columns of the table.
  3.) something, you need to check if you are able to add the action event ppr on falling down during the creation of this area through customization, and even then set the ppr on this field in the PR of the extended controller method.

  If the corresponding attributes are not available you must extend the VO (responsible for display in the columns of the table) too.
  Thank you
  Pratap

• Find records overlapping start and end dates

  Hi all
  
  I have a table with begin and end date columns. I need to find the records that overlap with a few values in corresponding column.
  
  Table: MG_AUTH_AGNT
  -----
  ID
  MGATH_clnt
  MGATH_beg_DT
  MGATH_END_DT
  MGATH_SERV_GRP
  MGATH_STAT
  MGATH_TYP
  MGATH_NHIC_ERR_CD
  -----
  I need to find records containing dates that overlap.
  
  Examples of data
  -----
  
  If the customer has two records with the same MGATH_SERV_GRP, MGATH_STAT, MGATH_TYP and start and end dates of the first disc are 01/JAN/2009 AND 01 / JAN / 2009.
  start and end dates of second record are 15/JAN/2009 and 15/FEB/2009.
  Here are the dates overlap. with my select query, I should get these two recordings.
  
  I am using the following query. But it is too slow. Could you please suggest a better sql?
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Select MG_AUTH_AGNT m, MGATH_clnt, MGATH_beg_DT, MGATH_END_DT, MGATH_NHIC_ERR_CD, id where m.MGATH_SERV_GRP = '1' and m.MGATH_STAT = 'A' and MGATH_clnt = (select distinct MGATH_clnt of MG_AUTH_AGNT d where d.MGATH_SERV_GRP = m.MGATH_SERV_GRP and d.MGATH_TYP = m.MGATH_TYP and m.MGATH_CLNT = d.MGATH_CLNT and d.MGATH_STAT = m.MGATH_STAT and m.idd.id ((trunc (m.MGATH_beg_DT) & gt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_beg_DT) & lt;=trunc(d.MGATH_END_DT)) or (trunc (m.MGATH_END_DT) & gt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_END_DT) & lt; = trunc (d.MGATH_END_DT)) or (trunc (m.MGATH_beg_DT) & lt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_END_DT) & gt; = trunc (d.MGATH_END_DT))) MGATH_clnt order MGATH_beg_DT
  
  Published by: user10727414 on March 17, 2009 01:36

  user10727414 wrote:
  My data is correct

  MGSRV_CLNT = MGSRV_BEG_DT = MGSRV_END_DT
  501184242 = 28-AUG-07 = 31-DEC-9999
  501184242 = 28-AUG-07 = 31-DEC-9999
  501184242 = 20-DEC-07 = 31-DEC-9999
  501184242 = 20-DEC-07 = 31-DEC-9999

  And we had to guess that a year of "99" was in fact "9999" were we? Hang on I'll go and dust off my crystal ball.

  Well, now we know the correct dates (?), we'll put that in the original request...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with mypeople as
    2  (select 501184242 as id, to_date('28-AUG-2007','DD-MON-YYYY') as stdt, to_date('31-DEC-9999','DD-MON-YYYY') as endt from dual union all
    3   select 501184242, to_date('28-AUG-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    4   select 501184242, to_date('20-DEC-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    5   select 501184242, to_date('20-DEC-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    6   select 2, to_date('19/01/2009','DD/MM/YYYY'), to_date('24/01/2009','DD/MM/YYYY') from dual)
    7  -- END OF TEST DATA
    8  select id, stdt, endt
    9        ,case when lead(stdt) over (partition by id order by stdt,endt) <= endt
   10                or lag(endt) over (partition by id order by stdt,endt) >= stdt then 'Overlap'
   11              else 'Ok'
   12         end as status
   13  from mypeople
   14* order by id, stdt, endt
  SQL> /
  
          ID STDT      ENDT      STATUS
  ---------- --------- --------- -------
           2 19-JAN-09 24-JAN-09 Ok
   501184242 28-AUG-07 31-DEC-99 Overlap
   501184242 28-AUG-07 31-DEC-99 Overlap
   501184242 20-DEC-07 31-DEC-99 Overlap
   501184242 20-DEC-07 31-DEC-99 Overlap
  
  SQL>
  

  Looks like it works for me.

  If it does not work for you then maybe had better give us a statement of create table and insert to your data in the example statements then we can see what you're trying to do.

• XY-do graphics as the record of the last 100 data points

  Hello!

  I'm trying to plot data over a period of about 110 s (99Hz sampling frequency). The problem is that the XY-graph I use seems to collect only the last 100 samples for some reason any. I do something wrong or is it just a property that is interchangeable?

  Hi Aleksi,

  You may not set up "BuildXYGraph" more accurately? Like turning off the only option of this ExpressVI?

• Record a continuous flow of data in a txt file?

  Hello world! I'm relatively new to the ICB and I was wondering if I could get help on something. I'm trying to modify a sample file that reads permanently a tension from a daq card. I would like to save this data in a text file, but I am relatively new to the C programming language (I'm a java person) and cannot distinguish the location data. Once I know where the data is, I think that I can write the data using a sort of loop and the fprintf function. Any help would be greatly appreciated. This is the code for the method StartCallBack of the "Cont Acq - Int Clk" file that I use:

  int CVICALLBACK StartCallback(int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
  {
  Int32 error = 0;
  Chan Char [256];
  uInt32 sampsPerChan;
  float64 min, max, rate;
  The int journal;
  char errBuff [2048] = {'\0'};

  If (event == EVENT_COMMIT) {}
  GetCtrlVal (panel, PANEL_CHANNEL, chan);
  GetCtrlVal (Panel, PANEL_MINVAL, &min);)
  GetCtrlVal (Panel, PANEL_MAXVAL, &max);)
  GetCtrlVal (Panel, PANEL_RATE, &rate);)
  GetCtrlVal (panel, PANEL_SAMPSPERCHAN, & sampsPerChan);
  SetCtrlAttribute (panel, PANEL_STRIPCHART, ATTR_XAXIS_GAIN, 1.0/rate);
  Journal = (int) log10 (rate);
  SetCtrlAttribute (panel, PANEL_STRIPCHART, ATTR_XPRECISION, log);
  SetCtrlAttribute (panel, PANEL_STRIPCHART, ATTR_POINTS_PER_SCREEN, sampsPerChan);

  /*********************************************/
  DAQmx Configure Code
  /*********************************************/
  SetWaitCursor (1);
  DAQmxErrChk (DAQmxCreateTask("",&gTaskHandle));
  DAQmxErrChk (DAQmxCreateAIVoltageChan(gTaskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,));
  DAQmxErrChk (DAQmxCfgSampClkTiming (gTaskHandle",", rate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, sampsPerChan));
  DAQmxErrChk (DAQmxGetTaskAttribute (gTaskHandle, DAQmx_Task_NumChans, & gNumChannels));

  If ((gData =(float64*) malloc (sampsPerChan * gNumChannels * sizeof (float64))) == NULL) {}
  MessagePopup ("error", "not enough memory");
  GoTo error;
  }

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(gTaskHandle,DAQmx_Val_Acquired_Into_Buffer,sampsPerChan,0,EveryNCallback,));
  DAQmxErrChk (DAQmxRegisterDoneEvent(gTaskHandle,0,DoneCallback,));

  /*********************************************/
  Starting code DAQmx
  /*********************************************/
  DAQmxErrChk (DAQmxStartTask (gTaskHandle));

  SetCtrlAttribute (panel, PANEL_STRIPCHART, ATTR_NUM_TRACES, gNumChannels);
  SetCtrlAttribute(panel,PANEL_START,ATTR_DIMMED,1);
  }

  Error:
  SetWaitCursor (0);
  If {(DAQmxFailed (error))
  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  If (gTaskHandle! = 0) {}
  /*********************************************/
  Stop DAQmx code
  /*********************************************/
  DAQmxStopTask (gTaskHandle);
  DAQmxClearTask (gTaskHandle);
  gTaskHandle = 0;
  If (gData) {}
  Free (gData);
  gData = NULL;
  }
  SetCtrlAttribute(panel,PANEL_START,ATTR_DIMMED,0);
  }
  MessagePopup ("DAQmx Error", errBuff);
  }
  return 0;
  }

  Hello supercharizard,

  It comes to the appropriate line in the code that you posted that can lead you to "where the data is.

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(gTaskHandle,DAQmx_Val_Acquired_Into_Buffer,sampsPerChan,0,EveryNCallback,NULL));
  

  DAQmxRegisterEveryNSamplesEvent function establishes a callback as a routine function that will be called when at least a predefined amount of data is acquired. The part highlighted in the line is the reminder issued on this event, that you can study and modify the data adding streaming.

  This knowledge base entry gives a brief explanation of the events available. There are many other resources on DAQmx works as well in Help and online on this site that you should carefully study to better understand data acquisition.

  Regarding the release, there are several ways to do: here are two examples that produce a binary file (more fast, but you will need to write code to read data back) or add it to an ASCII file aligned in columns (slower but readable with a text editor, which is no code needed to read the data back). Another alternative is to make use of TDM stream on the disk library: this last resource is notably more complicated then I suggest you approach after some more practice on the fundamentals.

• Find the range of a data store?

  I am trying to retrieve the name of the scope that each data store. When I use of GUI of Vsphere Client, I can access it by clicking on a data store and in the configuration tab, so I know that somewhere there exists information.  I have spent a lot of time to API reference and have not found a way to access to information.  Does anyone have any ideas on how I can catch these data?

  I solved it myself, DatastoreInfo is extended by the VmfsDatastoreInfo, which allows you to access HostVmfsVolume which has extensions as a field!

• Range of Member data forms

  We recently upgraded to 9.3.1 to 11.1.2.1 and have noticed some errors on our forms of data in Planning.
  
  We have created 12 Essbase substitution variables to manage periods in our forecast of turnover (mon1, mon2, mon3, mon4, mon5, mon6, mon7, mon8, mon9, mon10, mon11, mon12).
  
  All forms of data have been configured to use variables such as the period, that is, in the data grid, we put the columns contain data period and the values to be «mon1, mon2, mon3, mon4, mon5, mon6, mon7, mon8, mon9, mon10, mon11, mon12»
  
  In some scenarios, we expect every 12 months. In this case, the process was to define the months while "sus" for the last month has planned. For example, if we si nous devions had to forecast Jan Jun the variable mon1 through mon6 will contain Jan Jun and the variables through mon12 mon7 will contain the value Jun.
  
  System 9 in the case where the forms only display the June period, once, but the system 11 Jun is shown once for each time that the variable is in the form.
  
  Marchandises9:
  Jan | Feb | Mar | Apr | Can | Jun
  
  
  Goods.11:
  Jan | Feb | Mar | Apr | Can | Jun | Jun | Jun | Jun | Jun | Jun | Jun
  
  Does anyone have any suggestions?
  
  Published by: 834403 on July 11, 2011 06:27

  Bug 11725854 - repeated variable user are not deleted in regular forms

  Which has yet to be fixed.

  HTH-
  Jasmine.

• If the record not found this particular date, then select the last recordings date.

  I have three columns
  Number DP_FND_CODE;
  Date of DP_DATE;
  Number DPPRICE;
  
  I want that if dp_uprice not found this particular date (: dd1) then
  Select maximum Dp_uprice that the date would be less then: dd1
  
  Example: -.

  I run query and :DD1 parameter = 18/10/2010
  
  SELECT dp_fnd_code, dp_date , dp_uprice dpprice 
  FROM dailyprice where dp_date = :dd1
  
  DP_FND_CODE DP_DATE                      DPPRICE
  ----------- ----------------------- ------------
            1 18/10/2010                  109.0344
            2 18/10/2010                   10.1045
            3 18/10/2010                  100.4010
            4 18/10/2010                  102.3276
            6 18/10/2010                   14.6958
            7 18/10/2010                   98.8300
            8 18/10/2010                  102.0900

  It will show that all the Archives: dd1 = 18/10/2010, you can see above the result of the query DP_FND 5 is missing.
  I want to if there is no DPRICE of that particular date (: DD1) then it shows the date of the last DPPRICE.
  Like this

  DP_FND_CODE DP_DATE                      DPPRICE
  ----------- ----------------------- ------------
            1 18/10/2010                  109.0344
            2 18/10/2010                   10.1045
            3 18/10/2010                  100.4010
            4 18/10/2010                  102.3276
            5 16/10/2010                  122.3276          
            6 18/10/2010                   14.6958
            7 18/10/2010                   98.8300
            8 18/10/2010                  102.0900

  so I used this query, but correct nicely.

  SELECT dp_fnd_code, dp_date, 
               case when dp_uprice is null then(
             select max(dp_uprice) dpprice from dailyprice where dp_date < :dd1 group by dp_fnd_code,dp_date
             ) else dp_uprice  end dpprice 
    FROM dailyprice 
    where dp_date = :dd1
    order by dp_fnd_code
    

  Thanks in advance.

  SELECT dp_fnd_code,
         max(dp_date) keep (dense_rank last order by dp_date),
         max(dpprice) keep (dense_rank last order by dp_date)
    FROM dailyprice
    where dp_date <= :dd1
    group by dp_fnd_code
    order by dp_fnd_code;