records showing as shortcuts. contained in the files are not accessible
Hi, I hope someone can help me solve my problem.
During a trip, I used my USB in different rooms, most of them had antivirus software. I have, I think, has contracted a virus that makes the shortcuts in my files. If I try to open these folders with the shortcut, nothing happens. It seems that files and folders are deleted, but it's not tru. I can contact them by entering the location on the taskbar. Then, I can reach the underlying files and folders.
When I look at the properties of shortcuts, I read that the shortcut refers to "pieimix.exe". I typed the name of the file in google but no results. I hope you can help me solve my barely visible files.
On the internet, I found a similar problem, but suitable for thus to get the files on another disk and then format the drive. This isn't a solution for me because the problem later is not only on that my USB has been good on my external hard drive (bigger than my local drives) and a SD card in my camera. The files on my C drive has not changed for shortcuts.
I hope someone has a good solution for my problem.
Hello
Method 1: You try to run Microsoft Safety Scanner mode safe mode with networking and see if it helps.
To restart in Mode safe mode with networking enabled:
(a) reboot your computer.
(b) when you see the logo of the manufacturer of the computer, press on and hold the F8 key.
(c) on the screen Advanced Startup Options, use the arrow keys to Select Safe Mode with networkand press enter.
(d) log your computer with a user with the administrator of rights account.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Also, try the steps from the link below.
Delete files using Disk Cleanup:
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
You can visit the below mentioned link for more information.
How to remove a computer virus?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Method 3: If the problem is not resolved, you can run the tool Windows Defender in offline mode.
What is Windows Defender in offline mode?
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
Reference: http://windows.microsoft.com/en-US/windows/windows-defender-offline-faq
Hope this information is useful.
Tags: Windows
Similar Questions
-
Downloads show they will perform, but the files are not actually downloaded.
It has happened since Firefox 9 that while I am able to download files and they show that being downloaded, in fact, they do not download and are never stored in the folder they are downloaded to. In the course of a download, it is possible to see the partial files but then they just disappear.
It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.
Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.
See "Antivirus disable in Firefox preferences - Windows."
-
All my files are set to read-only. The files are not.
All records are all my disks are set to read-only. This includes my drive c, d Bank, e-reader and my backup drive.
The files contained in these files are not read-only. How I found out about it, was that I tried to copy / paste a file from one directory to another last night and it was not authorized. Please keep in mind that I am logged on as administrator. There is only one user, me.
I ran a recent analysis of spyware, virus scan and checked the permissions of users. I unchecked the read-only installation and reset my pc and it still comes up read-only.
This causes a major problem.
Hi kadesigns,
Step 1: You can follow the steps mentioned in the article below, which deals with a similar question
You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7
http://support.Microsoft.com/kb/326549
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
File are not accessible by the system
There is, I had restored my computer using suite recovery of my computer. I backup all before starting the process. After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder. I'm going to remove it and I get a message saying that the file is not accessible by the system. From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker. None of these methods was able to remove this darn folder. Now, I don't know what to do next. If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive. and it's something I don't want to do. So, I ask, what should I do next?
Photo of properties of "folders".
Hi ShoaJo,
Error code 14, you can see the article mentioned and check.
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
I hope this helps.
-
Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari. Do you know where I can get the files?
Looks like the manufacturer was "Total Training. I can't find the title to Adobe.com
http://totaltraining.com/store/Photoshop-CS5-extended-Essentials/
-
I bought a nikon d610, when I tried to import raw files in the same way that I had always done with my old nikon d80 before I could not. I got a message saying that the files are not recognized by the raw format support in Lightroom. I also tried with photoshop cc and I couldn't either. Any suggestions?
Camera Raw plugin | Supported devices
The D610 was first supported by Lightroom 5.3.
You will have to pay to
- Lightroom 6 upgrade, or
- Join the cloud, or
- Download the free Adobe DNG converter, convert all the D610 Raw files to DNG, and then edit the DNG in Lightroom 4.4
Digital Negative (DNG)
-
The files are not available on Binatone eReader
Title:
card micro sd for e readers
I copied all my books from my laptop on a micro sd card when I put it in my ereader (binatone) it is empty, I tried to put back on the micro sd chip, but he said the files are already on and I want to copy or files to change what can be
Hello
You can try to contact the eBook readers Support Binatone for help.
Binatone Questions / Help
http://www.binatonetelecom.com/supportRfaq/questionRHelp
You can also consult with the card reader which can help you in the matter of fixing.
Hope this information helps.
-
L.R., I cannot import the photo of the new camera. Get the following message: "some files are not recognized by the raw format support in Lightroom." Click below to view a version update of Lightroom. Done this and updated Lightroom 4.4. Still cannot import - get the same message.
Devices supported by Adobe Camera Raw
The D610 requires LR version 5.3 or newer.
If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.
-
Cluster SOA with BigIP as HTTPFrontEnd - deployed WSDL and XSD composite files are not accessible
Hello
In our SOA environment, we have an architecture like that.
We have a Cluster with two nodes of SOA. Each node is to have an OHS. There's a BIGIP which is the HTTP of SOA Cluster interface.
BIG IP load balancing and HTTP Port 80 and HTTPS 443 port.
All access to BIGIP is over HTTPS. With HTTP, we are not able to access the artifacts.
Here, we are faced with a problem.
All WSDL, XSD, deployed on the server files have as - ends http://bigiphost:80 / soainfra / .....
These end points are not accessible, and we have to manually convert URLS to https://bigiphost:443 / soainfra / ... for testing.
Main question is coming when we're trying to raise our composites to RJO. Because the WSDL and XSD files is seen port http endpoints and they are not accessible from the harvester tool. Where a failure.
Can you please how do ensure that all composite end point and endpoint WSDL are generated as Https://bigiphost:443 instead of HTTP Port.
I tried two options
(a) setting serverURL to https://bigiphost:443
This option modifies all the endpoints and the localities of XSD in a wsdl to the https address document. but it does not composite point endpoint and endpoint WSDL. They are still Http. so not accessible through harvester or browser.
(b) setting HttpsServerURL to https://bigiphost:443
It makes a difference.
Please suggest how can I convert a composite and endpoint WSDL (protocol header) end point to https://bigipport:443 instead of http:bigipport:80
Thank you
Jessyca
Finally got the fix.
Changed the HTTPServerURL property in the EM Console > SOA-INFRA > SOA Administration > common properties > more advanced properties
Https://bigipport:443the value HTTPServerURL.
This helped and all the endpoints and composite WSDL endpoints have been generated with https://bigipport:443 instead of http.
So overall, I used two properties.
(a) a HTTPServerURL - change the endpoint WSDL and the composite end.
(b) ServerURL - change endpoints in the wsdl file with the value set in the present.
Thank you
-
Sync - shows files, but the files are not sync?
I have quite a few green checkmarks everywhere and when I open the creative cloud app, it says "All files up-to-date" but when I save a file in Photoshop or any other application in my creative cloud on my desktop folder, it is not sync at all online. If I go into the folder that the file in question is, that a file has not been checked. I have to manually discover my assets on the web and drag my creative cloud file in the folder web-based. How can I get my sync energised again?
Mac OS 10.9.5
So in the end, what the technical support worked. She entered my activity monitor and clicked on about all the processes that said, "Adobe", then clicked on the 'x' at the top left and select "Force Quit." It then restarted the program Creative Cloud and the synchronization started. What a mystery puzzling, but it seems to be synchronize now. Very grateful.
-
Hello
I have never installed software GEAR, but:
'C:\WINDOWS\system32\DRVSTORE\GEARAspiWD_3B7AACF0636A2C042EB7AD2AFF76D37B27BDD28C\GEARAspiWDM.inf '.
is UNDELETABLE in my XP registry, although the GEARAspiWDM.inf file is not on my PC.
I thought he had a GEAR knowledge base - so many people have had problems with this - but I'm not.
How can I remove any mention of my recording GEAR? The INF file has at least 6 addresses:
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {2A697B53-0DE3-42DA-B41D-C3F804B1C538}
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {2CE5A2E7-3437-4CE7-BCF4-85ED6EEFF9E4}
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {69995C7A-062A-4A90-A4DF-8C22895DF522}
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {881F5DE8-9367-4B81-A325-E91BBC6472F9}
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {AAD47011-8518-4608-9656-951DA35B587B}
HKEY_LOCAL_MACHINE\SOFTWARE\GEAR Software\DIFx\ {F59A9E08-A6A4-4ACF-91F2-D0344956C30B}
Thank you!
Pat Thompson
P. S.
SUCCESS! I went into Safe Mode, permissions changed in software GEAR railways and the keys in the registry, and the problems have been removed. AND there is a HUGE difference in the way my computer starts now... quick...
Thanks again for making available information that I needed. I had never noticed before ' permissions' (and I hope that you will never use again).
Pat
-
When you use the search for a window, the files are not listed in the search index
Original title: question of Windows search
When you use windows search, records that are not not in the search index are searced. Why?
Hello
1. What is the operating system installed on your computer?
2 are there any changes made recently to the computer?
Improve Windows searches using the index: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Improve-Windows-searches-using-the-index-frequently-asked-questions
You can also check:
Reconstruction of Index of Microsoft Windows 7 search: http://windows.microsoft.com/en-US/windows7/Change-advanced-indexing-options
Advanced Tips for searching in Windows
http://Windows.Microsoft.com/en-us/Windows7/advanced-tips-for-searching-in-Windows
I hope this helps.
-
Back to the top: the files are not backed up on external hard drive
When I back up my hard drive to Windows Vista, the backup (which should include my documents) works about 30 seconds and it didn't save the file created on my external hard drive of diving. The hard drive is a Seagate 160 GB with about 90 GB of available disk space. I have my using the Windows Vista program upward.
Thanks for the help.
Hello
· Have you tried the same files and backup folder in one different location (another drive or media)?
You can check if there are errors listed in Event Viewer related to backup is not made. To open Event Viewer, follow the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
You can also try to disable the security software and then try to run the backup utility and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Message error "the file is not accessible by the system.
I'm trying to reinstall HP C7280 complete installation of windows 7 64-bit Phoosmart.
I downloaded the latest form of Web site installation package, but when I try to install it I get the message "the file cannot be accesed by the system.
The file is C:\Program Files\HP\ (988329F4-A1A1-4D51-803C-EF2725A97627) \gup\auto. When I look at the file I can find it in the right place. Can anyone help?
Try right click on the Setup files and select run as administrator. Who should avoid permissions issues. Let me know what happens.
-
Why do not accept Lightroom 5.7 import from Sony. ARW format?
This version of the LR does not see your new Sony camera RAW files.
What model of camera Sony do you have?
Maybe you are looking for
-
I went through the steps on the help page of Mozilla theme checked by default, unchecked hardware acceleration disabled plugins and extensions. FF still crashes when I close a 2nd tab. Can I close a tab.
-
HP Officejet Pro 8610: My screen is all white or black or white.
My menu screen has been empty. I restarted the printer and the screen remains blank. Print from my MAC is still but no problem.
-
How can I get windows freecell game on my logon screen
I got this game for years, but I lost it I want to whether baxl
-
P1102w printer works on wireless-N?
The title issue. Looks like at least another user had this problem http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/802-11n-network/td-p/336365 Can someone give a definitive answer?
-
Parameters of Notification Leap of blackBerry for email and texting
First of all, I should mention that I use a French of BB 10 platform. I just got the new Bond, relocation of the Z10. In the previous version, setting notifications for email, phone, text, or other apps was fairly simple for a reason: they were all i