P1102w printer works on wireless-N?

Similar Questions

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• Unable to connect my P1102w printer to my network wireless (using Mac OS 10.6)

  I have a home network wireless vanilla (D-Link to a cable modem) and a MacMini running OS 10.6.8. My Mac laptop and 4th. GEN iPad work seamlessly. But my attempt to long hours to connect my new HP P1102w network was totally frustrating, despite a careful study of the documentation pdf, device/self test the printer configuration sheet, sailing on this forum, I'm looking at a slew of videos YouTube/HP and following all sorts of directions.

  The only consolation is the printer works fine on USB connection.

  Here are a few questions I met and that stopped me in my tracks:

  Carefully following both instructions pdf and video operating instructions online to HP, I get by step 6 w / no problemn. but then I go to step 7, which says:

  "Under the Mode of Communication , Infrastructure -click, select your network SSID from the list of names of the network (SSID)" and then click on the button. ""

  Problem is that there is nothing in this window. What I see is a State of the Wireless: enable or disabled (according to choice). And even if I try to select enabled, happening right now for people with reduced mobility. Aside: I note that the printed instructions show a copyright date of 2011. It's ancient history in the world of the CPU.

  Other issues: the single IP address I can find for the printer is the IPv4 address, but it is only for direct printing Configuration. What is the IP I'm looking for?

  Address of the printer hardward, I suppose, is your MAC? Boy, I sure could use better use of language here.

  So, needless to say, I'm stuck. It seems that it takes THAT hard, but so far nothing that I could find on the HP support or forums seems to help. Thanks for any advice you can provide.

  PS. I wouldn't go back this printer because I am a lover of HP printer, two decade, but alas, I might have if I can't find a solution.

  John Northwest

  Dear Gemini02,

  Thanks a lot for your helpful answer. It seems very complete, and I'm happy to give it a status of resolved problem, although I have not yet tried.  The reason is, one day before receiving your message, I benefited from technical support from HP that came with the guarantee of my printer (Oh!) I would have called them first before going on the forums. Lesson learned) and they took me in hand.

  I quickly reached a support person surprisingly knowledgeable and helpful tech (work of the night in Manila, PI shift), and I quickly accepted allow access remotely to my Mac and printer. For much of the next hour she practically held my hand as she walked through a fairly complex set of steps (very similar to yours) and here!, the problem has been resolved. She later sent me the steps she helped me through, as follows:

  ADDITIONAL INFORMATION: WIRELESS PRINTER CONNECTION

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP Deskjet 3830: Printer connected by wireless worked well until someone joined the home network - looking for password now!

  I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key.

  A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I was so.

  I put my wireless network password, and he says that it is evil. I used HP Print and Scan doctor to confirm the password (I guess that's the same thing as a "security key" - it was OK, but I keep being told it's wrong.)

  It is porrible that it is because my setup yesterday wasn't network but without straight wire? Or want to say I'm wrong?

  Other: since yesterday I have not changed anything or even restarted.

  Reset the printer to the default network. Now plug it back to your routers SSID with password. Try now. If Direct wireless is enabled in the printer, turn it off.

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• Want 4502: Printer don't work on wireless or scan via USB

  Previously I had no problem printing or scanning from my Toshiba laptop wireless. All of a sudden it will not see my printer via the wireless network. I checked the network on the printer according to the troubleshooting of HP and he says that it is in working order... it can recognize the network and gives an OK. When I plug in a usb cable in I can print. I can't scan, even with usb in.  Any help gratefully received.

  Hello

  If the status is not connected or if the printer's IP address is 169.254.xxx.xxx, then the printer is not connected to the wireless network.

  I understand your printer is now connected to the wireless network, so try run the printer software installation & on Windows 8 to convert the USB wireless connection again.

  Just for you information, you can also scan wireless by using the Web server embedded HP.

  Hope this helps.

• HP LaserJet P1102w: Printer HP LaserJet P1102w - this connectable to run via a USB cable and wireless?

  Can use the installation disc delivered with the printer and choose to run it using a USB cable or must it be used as a network printer?

  @8dakota8

  The specifications indicate that your HP LaserJet P1102w can be performed wirelessly or via USB.

  There is no Ethernet connection.

  The QuickStart Guide illustrates wireless / usb Configuration.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP p1102w printer wireless printer problem

  Hi, my printer was printing wireless on both computers. But recently, one of the computer lost connection with theprinter. I had to plug it with USB and it works fine. After a few days later, the other computer has also lost the Wi - Fi connection and I am not able to have this wireless printer work. Reset computer, printer, modem, without change. It still does not work!

  Hi Tsara,

  Update the firmware to version to migrate on the link below.

  Firmware update

  Restore factory default settings

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• HP p1102w: printing from Mac OS 10.10to hp p1102w wireless

  Wireless printing failed. When I go through the process to put in place the enemy wireless with USB connection: when I click HTML configuration, I can't go any further, and an error message is displayed as follows: this page contains the following errors: error on line 6 in column 47: entity 'nbsp' not defined and the error on the column of the row 12 8 : opening and ending tag not correct: link to line 0 and head. Help. MY OS IS 10.10.3. And the printer is HP p1102w. REPEAT HELP

  Hi @Eoj25karfuno,

  I see that you have problems running the HTML configuration. I'd love to help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)
  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer Wireless:
  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.
  Print a Configuration Page.

  Remove the printer in printers and Scanners and add it again. You may need to click the P1102w in the drop-down menu, do not use the default driver.

  Here is a screenshot, it is a printer model different, but just to show you what it will look like.

  

  Follow this document to reconfigure the printer via the wireless network.
  Set up your printer for a wireless network for the HP LaserJet Pro P1102w printer.
  Under OS X v10.10 Yosemite, OS X v10.9 Mavericks and OS X Lion mountain v10.8 Select method three: using a USB wireless setup.

  If you are still having problems loading of HTML, update the firmware of the printer configuration Page.

  Unfortunately, there is not one available currently to 10.10, but if you have 10.9 or less or a Windows computer, you can update the firmware in this way.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If you're still having problems, please let me know. Thank you.

• I don't know how to scan from my laptop to my C4580. Wireless printing works

  I don't know how to scan from my laptop to my C4580.  Wireless printing works

  Hello

  See this link.

• Cannot get my deskjet 1050 printer to work as wireless

  How do I use my deskjet 1050 printer wireless to connect it to my router? 8 64-bit Windows. He repeats, I need to install wireless connection procedure, but I can't find anything like that. My router is supposed to be able to turn any printer in a wireless network.

  Hello

  What is your magic router? Based on the specifications of your printer, simply:

  Connectivity

  HP ePrint ability	NO.
  WiFi functionality	NO.
  Connectivity, standard	1 USB 2.0 PORT

  If your router was not a magic trick otherwise you need something called print server USB wireless that is similar to one of them:

  https://www.Google.com.au/search?q=USB+wireless+print+server&hl=en&TBO=u&rlz=1G1GGLQ_ENAU282&source=Univ&TBM=shop&SA=X&EI=26S1UMDTLam8iAf-oYCgAw&SQI=2&ved=0CEcQrQQ&BIW=1920&BiH=976

  Kind regards.

• P1102w printer is not "readable by this computer.

  Hello

  I used my laserjet P1102w printer with my macbook pro for about two years, using a USB connection.

  I've never had real problems with the printer and it was working fine with my macbook last Thursday night. I tried to print something on Sunday night but when I plug the printer by USB my computer flashes just a window that says "the disk you inserted was not readable by this computer." He refuses to print all documents and does not appear on the computer at all. I tried to reset all settings for printing on the laptop, but the printer does not always appear. I use Mac OS 10.9.5. I had not brought no changes to software over the weekend I would have thought this would cause.

  I am a student and really need my printer working again as soon as possible. Can someone help me with this problem? I can't think what else to do.

  Thank you, Stephen.

  Hi @SJRamsay11,.

  I see by your post when you connect the USB cable to the Mac you get the message "the disk you inserted is not readable by this computer. I can help you with this.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, restart the Mac, and then connect the USB to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  There are two ways that we can disable it.

  Print a configuration page. Printing a Configuration Page.
  Select the method two.

  If the printer has a IPV4 address or the Direct wireless is under tension and indicating an IP address, you can access: the printer Web server integrated and disable the Smart Install from there.

  If you have a valid IP address, type the IP address in the Safari browser to bring up the printer built-in Web server and you can disable the Smart installed on the printer.

  If it does not, you will need to disable the Smart Install the printer on a Windows computer.

  On the Windows computer, go to start, computer, right click the printer CD
  and left click Open in a new window, go to Smart Install utility util/siutility.exe/HP.
  printer or PC - printer select / click on disable.

  Let me know how make you out.

  Good day!
  Thank you.