recover a formatted disk scan vacation photos
Hello
Try to connect your device to your computer, and then use Recuva (free) or Minitool Power Data Recovery (free up to 1 GB, $60 if more than 1 GB) to attempt recovery of your photos.
If you have problems using one of these programs, please tell. I'll give more detailed instructions. To be honest, I don't know how well these run on the storage of your camera because I've only used their with hard drives.
Good luck
Digilodger
Tags: Windows
Similar Questions
-
PowerMac G3, 9.2.2, and inability to format disks/diskettes
So rather a strange question, but I have been unable to locate any information about any similar problem to what I saw. Currently have met a Performa 6200 CD and a Powermac G3 266 Mhz. My main problem is with the Powermac, and that it will not recognize or format disks (floppy and CD).
If a disk with some data on it (Mac and PC format and all two accepted on the Performa), it gives only a message to initialize the disc and only Mac 800 K or BACK 800 k. However, an attempt to initialize the disk results in a clerical error and fails. The same error occurs when it is given to a blank CD, including the pop - up application initialization in the PC format, but fails every time. Disk utility ran and not errors in the system, so not sure on what could be the problem.
Any help to solve this is appreciated. I am trying to recover data from floppy disks to backup my Mac SE (definitely failed SCSI drive), but while I can access most data on the Performa, only G3 gives the opportunity for me to move the files from Mac disks only to other CD/USB/Ethernet media.
You do not "format" dtive optical media using the OS disk utility.
For the CD, you will need to find a burning software that is compatible with the old Mac OS, as a version of olde of Roxio Toast that will run on Mac OS 9.2.2 for formatting and burning a disc with you setup to transfer data and burned to a disc.
Search for Roxio Toast 5 this could work as its requirements are Mac OS 8.6 or later.
I don't think that any old version of MacOS had all abilty to burn discs in native mode. You need hardwarw/software of third parties to achieve this.
I also believe, the CD drive is a CD-ROM drive and has no way to record on a disc.
So you have to find/purchase/use an external, compatible player/CD burner in any case.
In addition, referring to CDs, first Macs and early PowerMac that had integrated CD players could only read and use optical discs of 650 MB size and these discs had to be the r/RW type. These first Macs were unable to recognize the later 700 MB size CD - R /-RW.
I'm not sure of your disk problem. There may be simply that the floppy drive has a problem with his read/write head that prevents the diskettes to be read or written on properly.
There used to be floppy drive cleaning discs that could clean up the read/write heads, but I don't know if these are available any longer or if that resolve the problems with your floppy drive or not.
I found a bunch of floppy drive different kits on Amazon of cleaning.
So, check out this possibility, as well.
-
Scanning multiple photos and save them in dependent files
Have a new printer, a large Format HP Officejet 7500 a.
ProductName; C9309A - SSN {removed privacy}.
Installed on Windows 7 Pro and Mac OS X
Question; Scanning multiple photos and save them in dependent files, as it used to be with the series HP4500. Possible or not? No msg error but boring...
This is possible, plaurier, but you will need to select it in the printer for scanning software. When you are scanning from your computer, there should be a window that appears with information about the type of file you want to save as only as well as the details of the analysis.
Here there should also be a button or a link for the "Advanced" options You can choose if you used to save the scans as a single file or multiple.
Let me know if it helps!
-
Scanning several photos on HP 4365
I used to be able to scan many pictures on my old printer, but my 4635 only allows me to do one at a time. Is it possible to scan multiple photos on a 4365? I tried 'Advanced settings', but it stil I can only scan one at a time.
HI @cpplinford
No, the software is not installed.
The FULL feature software is FREE from the HP website link provided.
The following resources will help you to install the FULL features software:
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exeDO NOT be scammed by someone asking you to pay for the HP software!
Hope that helps!
-
looking to scan several photos on a mac
I have thousands of photo I want to scan on my mac. I would like to find a scanner with a decent resolution that has an automatic feeder. If anyone has found a?
How quickly you can scan your entire Photo Collection - what I found from my first week of scanning
http://www.scanyourentirelife.com/how-long-quickly-scan-entire-photo-collection/
Follow up to above
http://www.scanyourentirelife.com/how-scan-photo-collection-half-time/
All of
http://www.scanyourentirelife.com
http://www.scanyourentirelife.com/category/scanning_photos/
And some comments
http://bestreviews.com/best-scanners
https://www.ezvid.com/toptenscanners
http://www.PCMag.com/Article2/0, 2817,2373832,00.asp
http://macmint.com/best-document-scanner-for-Mac/
Edited to add
and the source from first article at 22 cents/scan if you had 5,000 to analyze:
https://www.ScanCafe.com/services/valuekit-product
Standard WARNING: I have no commercial interest in any of the above products.
-
Hello, I'm scanning several photos and they are saved as a single page. My old hp split in separate files as long as they were not paid. I can't understand how to do this with this new all in one photosmart hp 6515. I have the vista operating system. I just support hp cat and he said to uninstall and reinstall the printer. Someone, help me.
Thank you, Shirley
Hi grammy2012,
Printers with lower and 14 driver versions have this feature. With 20 versions or older printers are not pilots. If you have a new model, no doubt he has the version of the driver above 20 and the function is simply not in the software.
This means the automatic cropping several photos.
With 20 and older driver versions, it is possible to do this, but not automatically.
1. place your multiple photos on the glass.
2. scan in JPG
3. Select the harvest in one of the photos.
4. click on to add a page.
5 harvest in the second photo.
6. If you have more than two photos on the glass, perform steps 3 and 4 until all the photos are on a 'page '.
7. click on save button and assign a name, the photos will be all saved in separate files.
-
I can not scan several photos at once
I have a hp deskjet 3052 has windows vista. My old printer was able to scan several photos at once and save the pictures to separate files. It does not seem to do that. I intend on scanning multiple photos and plan on using this printer and get something else, if it is not possible to the software to make or load. Anyone know where I can find a list of printers that will do this?
After 4 years, I was sent the software. It seems to work fine if I put the pictures away from the edge of the scanner. My scanner still works, so I'll use this program. I'm very happy with it.
-
Satellite L550D-13V - how to recover without recovery disks?
Hello
I had a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.
I tried to fix it, but it does not work. So I decided to recover via HARD disk utility.
Everything seems to be okay, but ultimately the tool said that errors have occurred. I tried to get it back again, but the process aborted with blue screen "PAGE_FAULT_IN_NONPAGED_AREA" this time.After reboot system told me that no bootmgr is available. I tried to start using the recovery disk, but it also seems to be defective because the system cannot boot from the disks.
And there is my problem. I cannot start / retrieve now. Volume D seems to be OK - the HARD disk utility files are still available, but I can't create a new recovery disks and it is not possible to start in disk utility.
You have any ideas?
Thanks in advance and best regards
DannyHello
The story is strange
I m wondering why you are not able to boot from the recovery disc?
Have you used the recovery disk created in the past or have you tried this drive for the first time?However, with regard to the error message: PAGE_FAULT_IN_NONPAGED_AREA
I googled for that and it sounds like it could be linked to the fault memory.
Perhaps one of the failures modules.Of course, this is just a personal opinion
If a HARD drive folder is available on your HARD drive, then there is a small chance of getting the recovery of HARD drive to work. Here's an interesting thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40790 -
Scanning multiple photos on a series of HP Deskjet 2540
Recent HP AiO printers allows users to scan and save multiple photos using the scan software.
Here's a video that shows you how to do it:
So that this works, you need to install the HP software that comes with the printer using the CD or you can download a copy of the software of the printer to
http://WWW8.HP.com/us/en/drivers.html
Type in your printer model to download the software for your computer.
The following printers have this automatic feature of "Crop":
HP Deskjet 1010 series
HP Deskjet series 1510
HP Deskjet 2540 series
HP Envy 4500
HP Envy 5530
HP Officejet 4630 series
HP Officejet series, 2620
HP Officejet Pro 8610/8620/8630 series
Scanning multiple photos:
HP Officejet Pro 8630
For more tips scan, please see this post:
Click on the STAR of CONGRATULATIONS on the left, if it helped you somehow.
Some good information here, thanks greenturtle!
-
Don't know why, but I can no longer scan several photos at the same time. Whenever the file is closed and I have to start from scratch on each new photo...
My scanner remained active until I clicked the scanning is finished...
In January, I've updated our computer system and I'm not sure but maybe that may have something to do with the problem.
Thanks for the information. When you upgraded to Windows 8, you upgrade software to printers and drivers as well?
Please take a look below on how to scan with or without HP software:
How to perform a scan: Windows 8
Let me know the results.
-
Photosmart 6510 I want to scan multiple photos and then separate them into albums
Photosmart 6510, I can scan several photos, then create albums in the files I have scanned in IPhoto. ? I tried it but not able to download individual photos off the coast of the photo I scanned.
Your welcome Oldpro, please be sure to come back and let us know if this has been fruitful for you. It makes it easier for members of the community who may experience the same issues find a resolution.
Thanks Al!
-
How to scan a photo without a trace with a mouse LG scanner?
HOW TO SCAN A PHOTO WITH HER LEAVING TRACES ON THE IMAGE TO GET A CLEAR PICTURE?
Hello
How to clean the Scanner glass
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00553775
-
Pavilion n 15-220se: accidentally formatted disk 0 partition 1
I accidentally formatted disk 0 partition 1 when I tried to install windows 7, installtion worked well and probably finished, but then I have not found any drivers, wifi was not niether work made the lan and I can't find drivers for something to work pls help
Hello:
For this model of the wireless card you need this driver wireless and bluetooth...
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_148570_1#tab1
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1
When you post the rest of the ID you need, I'll post links to these drivers too.
-
Downloaded the camera vacation photos and sorted by them by putting each location days in it is a separate file. I also received a disc of NASA just with scenes of wallpaper on it and downloaded it. These points of view, NASA, to another disc I changed once a week. I keep them in a separate folder named desktop wallpaper photos, in my position of photos. I went to change this view for weeks and not only discovered that all these photos have been in the display list folder / in Control Panel, but also all the pictures in the files of our holiday, which should have been in the image file in my documents. There are also pictures of my family photos files that are in the selection of wallpaper from the 'view' file in the documents. I will return to my pictures folder and there not a file here for them, which means that it is not a copy of the file, but the actual file. I did not do in the lists of display/control panels. How can I remove or cut pictures that came the wallpaper display lists and put them in the my documents/images files where they should be. Tried to cut and paste functionality, but nothing of this nature appears.
Hello
Navigate to the folder where the photos are and then right-click on the image and click on copy and then open the folder My Documents/photo then right-click and press on paste. Since you have a lot of picctures you can hold CTRL and left click each photo in this way they need only hit copy once.
I hope this helps. -
Just got a HP Deskjet 2510 printer. I want to scan a few B & W photos to put on eBay. I hooked the printer on my laptop HP Pavilion/TouchSmart, with windows 8.1 System.
When I opened the devices & click on printer, my new printer is displayed and I can print a page. What I want to do is to scan a photo.
How to open the function scan of the printrer?
Hello
Follow these steps to scan the Windows 8.1:
http://support.HP.com/us-en/document/c03478505
If you do not its complete software installed, run the following tool to get the latest version of the full software features:
Shlomi
Maybe you are looking for
-
Satellite L50-B-15U - video Flash don't play no not because of Conexant Audio Driver
Hello world I bought this laptop Toshiba Satellite L50-B-15U , and lately I have had this problem. Whenever I want to play a video on youtube, or most of the flash videos in browsers, they load and buffer, but used to play and are stuck at 0:00. Afte
-
Connect EZ Iomega media &; &; backup center directly to the computer
HelloIs it possible to directly plug this hard drive to the computer without internet area (router)?Thank you in advanceSébastien
-
Perforce Workspace and LabVIEW
Hello I take more than one job where I use an existing computer that has been configured with Perforce for Source control of LabVIEW. I use the same local workspace as my predecessor who is simple, the c drive. When I create a new VI and add it to pe
-
Why my player does not recognize a dvd disc?
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
I have a Curve 8310 and am trying to DL Office on a new computer, but I lost my original disc. I know it's a stupid question, but I can't really know what software to download! my phone is 8310, always running v 4.2.2.170 (updates which even today, i