Recover the original Audio in CS6

Similar Questions

• I opened a picture with preview and all pixels become white. Is it possible to recover the original image?

  I just opened the photo and every pixel in it became white. There is no way to return to a previous version of the image, as if she had initially being that color. The size of the image remains the same, but each pixel is white.

  This is the second time that's happened, but the previous one, I was able to recover the deleted original file on my SD card, which is not an option at this time.

  I would like to know if there is an app or option on Preview that allows me to recover the original image.

  White preview screen glitch

  back-

  

• the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  display images in windows mail

  Until recently, the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  The problem is that IE9 has been installed by Windows Update and its not not watch 'bar info'.  See www.oehelp.com/OETips.aspx#15 for workarounds.

  Steve

• Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

  I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

  "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

  And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

  "The drive is set as enabled in the BIOS is too small to recover the original system drive."

  Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

  Hello

  We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to recover the original file names?

  Hello! Please help me.

  
  

  Accidentally, I changed the names of the videos that I used for Adobe Premiere. So now, every time I open the folder Adobe Premiere, videos are missing and replaced with a red screen "media disconnected". Is there any way I can recover the original file names without having to do it manually one by one?

  
  

  I tried to go back to a restore point, but it does not work. I can't locate too because I don't remember which video is which.

  
  

  I already edited almost 50 videos in this project it would take me a loooot of time to start all over again. :((

  
  

  Hope you can help me.

  If I understand you correctly, you changed the name of the file in Windows and can't remember what used to be file names. You have modified these in Premiere Pro, and now the project files, that you created do not know where to find the video files.

  Is this correct?

  If so, I may have a simple solution for you.

  Assuming that you're not maxing out every file so that they are all exactly the same length, the number of minutes and seconds and images should get you where you want to go. Almost as unique as a fingerprint on my PC, but I never capture a bunch of videos which are identical in time - although it is possible to do, I guess.

  Open a project file. Checking the properties of each file should reveal the name of file theoriginal and duration, which is also available directly on the thumbnail image (see image below).  Open the media browser, then look at the times on each clip. This should be enough to help you either republish or change the Windows name to what it was originally. It's always one at a time, but it shouldn't take too long. A pen and paper could help 50 videos.

  

• How can I transfer my copy of a computer CS6 6 years running XP Pro (which comes crashing) to a new desktop Win 10 under Win 10.  I have the original DVD of CS6. As I am a former amateur photographer, I have no interest in the CC = ie seru

  The title says it all.  As indicated, I have the original DVD with its serial number.  This is probably the version 6 of Photoshop CS that I bought over the years.

  I guess I should reactivate the old serial number or get a new one for my DVD CS6.

  
  Thank you.

  Elliott Novak

  Hey Elliot,

  I checked with your ADOBE ID on the forums and found that you have Photoshop CS 6 registered under your account, you can get the serial number of your there. See how, find the serial number of your product Adobe quickly

  Also, in order to download and activate Photoshop CS 6 you will need an internet connection and you can do this by going to the following link: download Creative Suite 6 applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Video edited GOPRO is "zoomed" compared to the original film cam; CS6 body

  I'm editing only GOPRO footage in PPr CS6. The edited video is "zoomed" ~ 2-3 x from the original sequence of cam.  WHAT's UP W/QUE? A checkbox somewhere? What should I do to change this and have exactly the same appearance as the original cam sequences?  I hope it's understandable. TIA.

  Hi Dearborn1,

  You are welcome, but we will make sure you are 100%. HDV refers to a budgeting on the tapes that HD "anamorphosée" of documents, which is so not 'full' HD, which is 1920 x 1080, 1440 x 1080. Don't know what record mode you are, I think you will have the options of the HD 1080 or 720, but you may be better off with a predefined "AVCHD" which corresponds to the form of footage (perhaps you meant HDV 720 p? Not used by a lot of cameras).

  You CAN put the clips of 1920 x 1080 HDV project and they look very good, but you lose some resolution in this way. In fact, you can put 1080 clips in a project of 720 p and it still works, but ideally, you want the best match for the source, and then you always can downconvert exit final for web DVD, etc. What is the format of the exact source, the instance as "1080 p 30"?

  Thank you

  Jeff

• Replace the original audio track

  I imported a movie like asset for Premiere Pro and created clips in a sequence of it. Several parts of the original film are in different places on the timeline, they are trimmed etc...

  When the video is almost over, I realized that the original contained in the original film audio is incorrect and I replace it with another audio file, which is of length the same and already imported into the project. But I don't see an option to replace the audio source to an audio track.

  I know it is possible to break the link video and audio, but this does not solve the problem. Then right click on a single item (after having to separate, it's only an audio track of a clip) in the timeline and choosing Properties, path that points to the original movie file. I would change the file path so that it points to my new current audio file.

  Is it possible to do more than to remove all existing audio tracks in the timeline and create them from the beginning, using the new audio asset as a source and do it manually any changes that were made to the original video?

  Well, you'll have to do the hard

  After you import your audio track of replacement, load it in the Source monitor. Then, by pressing the Alt + Shift key, drag the audio to one of your instances of clip with the sound 'bad '. Audio of the movie clip instance will be replaced (it's done Alt), and it will retain the same point (what's Shift). You will need to do this for each instance of a clip in the timeline; Unfortunately, you can not select them all and it in one pass - points in are not met then.

  The easy way would be to get a new copy of your original movie with replacement audio multiplex. All you have to do is then right click on the item in the project Panel, select replace sequences and navigate to the new replacement clip. The original main item will be replaced, and this will be running continuous down to all instances of the clip in the sequence of your project. If you can multiplex the original video with the audio again, it's the way to go (especially for a complicated editing); However, you said that you are using the video "m4u" (which I assume you meant "m4v") so this creates a little more difficult.

• How to recover the original features after installed CC

  My organization has bought the CC license for some of our systems. I installed it on a system where we already have a license on CS 6 installed by mistake. When I realized that, I advised our admin and he refused the license. However, none of the 6 Adobe applications open CS that worked correctly on this computer. I get a message that says that this Adobe license has been denied or rejected, or something like that. So I thought that it was as easy as uninstall CC and all other CC files send files to the Recycle Bin, but no. Even after all the CC files were completely removed from this computer, I still can't open the CS 6 original apps because the message about the license violated keeps popping up. How can I solve this problem? (so that the original CS 6 applications can still be used as if the cc installation never happened)

  Please check workaround under: joint licensing - if you have an active member of the creative cloud and a serial number for Lightroom 6

• Recover the Original of Windows 8 for the new HARD drive

  Hello..

  Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

  And, I had upgraded to windows 10 recently.

  Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

  And further,

  1.) is it possible to reinstall windows for one SSD?

  2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

  Thank you

  Tilan

  If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

  Looks like you're in this scenario.

  Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

  Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

  Get a SSD for optimal performance.

  Dell have updated drivers for Windows 10 pilots (WT64a) system:

  http://downloads.Dell.com/published/pages/Inspiron-15R-5521.html

  See installing the driver recommended order:

  http://dellwindowsreinstallationguide.com/2015/09/27/driver-installation-order-Windows-10/

  If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:

  http://dellwindowsreinstallationguide.com/download-Windows-8-1-retail-and-OEM-ISO/

  http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

• recover the original bone broke my operating system recovery cd.

  I bought my laptop with original os(windows xp). But now my system is completely affected by the virus and broke my cd of restoration of the operating system. How can I get original os?

  Hi Renon,

  You will need to contact the manufacturer of your laptop (HP/DELL/ACER /...) and check with them to the cd.

  I hope this helps.

• Need to copy audio files from a USB on the computer for transcription - how to sync and keep the original audio files on USB?

  Have the transcript very important things to do; usually get audio on the discs, but this time I had rec on a USB - has never worked with USB before, and I don't know how I copy the files on the USB key to an audio file in my computer through Windows Media.  Really of what I can do something wrong and erase/delete files on the USB key if I don't know what I'm doing.  I guess I "sync", but could someone please give me step by step on how it's done with Vista?  As you can summize, I'm "technically not contested."

  Thank you.

  Hi Tech Mom,

  If you copy and paste a file or folder, it does not get deleted in the source location. It gets deleted in the source location when you cut and paste the file or folder. The article below explains how to copy and paste a file or folder.

  Copy a file or folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

  See question 5^th from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to recover the original OS during installation of a different operating system

  Hi all

  I have a problem with my Thinkpad x 201. Original OS was Windows 7 Pro 64 bit. I installed Windows 7 Ultimate 64 bit on the main data partition and so I lost my original OS. But the partition recovery and partition of 1 GB of smal (system_drv) are still intact! Now I can not access the recovery partition in windows, nor can I access the ThinkVantage button at startup.

  I found something on the similar problem - linux installed, but not Windows.

  So can I get original OS and how to do it without having to purchase recovery discs?

  Thank you very much for the help.

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/making-a-USB-stick-with-the-Lenovo-recovery-PA...

• Order the CD from recovery or recover the original settings?

  Hi all

  I just got my laptop L500-1XL a week ago. When I got it I was annoyed by HALF my hard drive supported by the recovery partition.
  and the thought that the recovery CD would do the same job. So I formatted and reinstalled. Only one problem... I noticed my laptop being a bit slower
  He notes: the poorest in the sides of windows (excellent portable 32-bit = athlete have to run around a garden for the year). THEN I noticed
  the recovery CD is only 32-bit... I have unknowlingly downgraded from 64 to 32 bit Win7...

  OK, so I understand 64-bit present the following benefits:

  1. the future of computing, takes advantage of the most powerful computer parts
  2 more resistant to viruses as a large part of the malware is made for 32 bit
  3 two times by computer calculations which allows better performance

  How to bring back 64 bit? Can I order a DVD 64? Also, if I'm wrong, I think that if I had to format using the Tosh DVD I might actually specify the size
  of the recovery partition? Because I tried to use disk management and 3rd party software to resize and it just wouldn't... Tosh lock? I HATE having to find
  and reinstall ALL drivers... There are loads, one or two is good, but... and we're usually taught to leave MS update of last resort, so I'd love the delivery of
  using a Tosh DVD.

  Thanks a lot for the ideas, comments, help them.

  I assume that your laptop has been delivered with the recovery image HDD Win7 64 bit and Win7 32 bit recovery DVD, right?
  If you have 64-bit again try to order it on https://backupmedia.toshiba.eu/landing.aspx

  Sorry but I don't understand why not create you DVDs from such recovery as recommended by Toshiba.

• Is it possible to recover the original if I copied a file?

  Is it possible to get a file once you copy it with a modified version? Help, please. Urgent.

  Essentially, no.

  If the data in the file are very valuable, perhaps professional forensic data recovery tools might work: http://www.drivesaversdatarecovery.com/

  You can try (free) Recuva, but I don't hold much hope.