Recovery after crash OS project

Similar Questions

• Need recovery (after the HARD disk crash) media - Alienware X 51

  My son X 51 HDD crashed and the recovery of Windows partition is not start.  We have never made recovery discs.  To make things worse, his CD/DVD Player did not long since a CD is stuck inside. We can try another CD/DVD drive, but that for now, the biggest problem is that we do not have any what recovery media.  We have a new drive hard and now just need a way to start and get back to it.

  Is there a way to create media (DVD or USB) after the fact the drive recovery HARD crash?

  You can ask the recovery media on this Web site if you are located within the us, or Canada or contact the technical support of the site in your sons of the country, they can send you the USB key.

• Re: Vista recovery after Dban

  Hello everyone!
  I want to erase my HD with Dban and reinstall my Vista OEM afterwards, because I travel a lot and want to use this as a travel-laptop only, not private information on this subject.
  So my question is: is it possible to reinstall Vista with the recovery after using Dban CD, because it clears the full HD.

  Thanks for your help!

  Alp

  Why simply do not test you it? The recovery media is for the installation of the OS. If I don't write, I assume that you will try it anyway. :)

  Of course you can do it. At the beginning of the recovery procedure new partitions will be created and operating system installed.

• Access RECOVERY after the ICS update

  Exactly how do you get in recovery after update to ICS on TPT? I'm trying to update to ThinkPadTablet_A400_03_0069_0130_US.zip

  Any help is appreciated

  turn it on
  the moment you see the initial white lenovo pop up
  spam of flight until it says boot into recovery...

  is your broken flight button? they are built in the same way as the power button which has a design flaw...

• On OsX 10.11.4 latest version of first Pro CC 2105 starts but after choosing new project nothing happens.

  On OsX 10.11.4 latest version of first Pro CC 2105 starts but after choosing new project nothing happens.

  All menus are in white.

  No command available, if not impossible to close the application without forcing the output with the Mac OsX system.

  Best regards

  Francesco

  PS., everything works fine with Premiere Pro CC on the iMac even 2014.

  Well SadBoyPro, to do this:

  Go to the Adobe site and click to download the first version from there.

  Creative cloud opens and says that every upgrade will be removed [GREAT!]

  Go and install the previous version, here everything works fine now.

  The upgrade is now displayed in the creative cloud: don't DO IT!

  Then me and you wait for an update of work

  Good bye

• Light of the configuration options of the widget boxes - recovery after

  Hello everyone!

  No one knows what the heck is the function of the "SUMMARY AFTER" configuration option in the display of the configuration of the widget viewers?

  Thank you very much!

  After will set the duration for the slide to continue, with 3 slides image recovery after 10 seconds, for example the slide will close showing all 3 water slides and would resume again after 10 seconds.

  Thank you

  Sanjit

• Recovery after disaster - new host names, locations of different files. -noob

  Hello
  
  I am a "junior dba' best, pardon the beginner questions.
  
  I'm learning works recovery after disaster before that I never do. My scenario is that I'm assuming the worse where I actually take backups RMAN backupsets and auto, copy them to a new computer, and all rise again.
  
  In the documentation, I read that it says that you should copy tnsnames.ora and listener.ora. My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.
  
  Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.
  
  Any comments or advice?

  My first question is my hostname dead.franklyn.bignose.ca machine "works, but pretending is dead" and the NEW machine has live.franklyn.bignose.ca. tnsnames and listener.ora both of course refers to old.franklyn.bignose.ca, so I do not know how to approach this problem.

  You must set your file listener.ora accordingly with respective host names. Say about the live host name, the listener.ora should have the hostname as living and dead server, the listener.ora must have the hostname as dead

  Second, the new machine is that a new installation of 11.2.0.3 and the db home in/u01/app/oracle/product/11.2.0/dbhome_1/ old one was an update of 11.2.0.1 11.2.0.3 so he lives at u01/app/oracle/product/11.2.0.3/dbhome_1/. I don't know how cranky that will make Oracle.

  It wouldn't matter. Only thing is, you must make the appropriate changes in the required files (say listener.ora).

  Refer to this

  http://learnwithme11g.WordPress.com/2011/12/20/creating-physical-standby-database-with-RMAN-duplicate/
  http://learnwithme11g.WordPress.com/2011/12/07/creating-a-physical-standby-database-11gr2-3/
  http://www.Oracle-base.com/articles/11g/DataGuardSetup_11gR2.php
  http://gavinsoorma.com/2010/03/17/create-standby-database-using-11g-duplicate-from-active-database/

• Is it possible package an application later after creating his project?

  Is it possible package an application later after creating his project (maybe the next day) and how? Thanks for any help.

  Yes, it is possible. One of the files in the project directory is 'build.bat. You can run this file to rebuild the project anytime you want.

• PSE Organizer 12 crashes constantly after the film project in first 12

  I have PSE 12 time Organizer and first. I finished a film project after all first programme of work up to a slide show in the Organizer, but when I tried to burn my dvd does not recognize my burner (which is HL-DT-ST GH24NS50 SC if of LG) so I burned in a folder. Then I tried to burn with Windows DVD maker and burner of Wondershare video which none recognized the files containing the titles of movies & scene intro-s. A 2nd problem has also developed during the process of completion of the project. Now my PSE Organizer crashes as soon as it loads the media, so I am now virtually locked out of my photos. The only new files added to the organizer since I started this project are those who come first i.e. stories etc. Can anyone suggest a way to fix these problems. Thank you

  Thank you for your response. I downloaded Image burn but have not yet had the opportunity to try it. I'll try it out tomorrow so to try to get the first to recognize my drive that is faster and up to date.

  My computer is a computer of Windows 7 64 bit with 8 GB of RAM and loads of free disk space. I suspect my programs are still the original 12 version, but I tried to invoke any update in the past. It seems that they must not have worked.

  On the problem of the Organizer, I deleted the psa.prf file you suggested but who could not make all the difference: the program quits immediately after its launch. It is still not open long enough for me to create a new catalog.

  You have any other suggestions? And thanks again for your help so far.

  Garrysen

• Satellite P300 - recovery after bad crash of HARD disk

  Hello

  I have this Stellite-P300 - 1 H 8, who has had a bad HARD drive crash a few days ago.
  The primary partition of the 'system' has achieved so badly that my office he detected in RAW, no NTFS format.
  I bought a new HARD drive and managed to clone the content (some sectors were defective), now I have two options at startup:
  -Start windows the normal way, which ends with a reboot!
  -Recover, ending with a nice dialog telling me the recovery program could not start...
  I feel stuck and I would like to continue to use the original copy of Vista that is on the hard disk, what can I do?
  TIA

  Sergey

  Hi Sergey

  I presume you didn't create recovery DVDs, right?
  This disc you can install original Vista again.

  If nothing helps, you can order it on https://backupmedia.toshiba.eu/landing.aspx but I recommend you to install Win7. I did this on the P300 brothers and it works perfectly on this machine.

• Get disks win 7 recovery after disk Crash

  I have a Compaq Presario CQ57-355SA (Win 7 x 64 Home Premium) which is a little less than 2 years. The HARD drive crashed just take the recovery with her partition. I have a new HARD drive on the way, but I need an operating system to support (DVD) I can load.

  How can I get these disks. I looked at similar questions, but the answers don't seem to solve my problem.

  I think I found a solution.

  I downloaded a standard support of Win 7 Home Premium install ISO from Digital River and Ms. spoke to me through the procedure for creating a bootable USB.

  I'll have to worry and HP specific drivers afterwards, but at least I won't have all the other bloat ware.

• HP 14 Chromebook q000ed [after several powerwashes and a USB key recovery is crashed/restarted]

  HP 14 chromebook q000ed

  purchase date: November 2013

  - - -

  A couple of months chromebook began to crash/restart. At the beginning it was a few times / week, then it got worse to the point I had 2 powerwashes in one day and hangs / reboots even guest mode!

  After the restoration of the many powerwashes and a USB port, I got another problem of crash/restart. So the problem looks like it is material.

  I paid for this product and I can't even browse the internet. There are a few Q & a in support of google here.

  What advice you get?

  P.S. the recent crash/restart happened when writing this thread! Had to write this new!

  I'll give you the Dutch HP support site, where you should be able to locate the correct contact information: Neem contact op met HP

  You are classified as a student, because it is the system of classification of the Forums. It does not reflect that you are a student in real life.

  Mario

• Crash of project files after the addition of new parameters for a plugin effect

  Hello

  That I was developing an effect, I built projects to test things out.  Now, however, I have added a new parameter to an effect, and when I open the projects that contain the same effect of the older generation, I get the following three error messages:

  1. after effects WARNING: conversion of command necessary indeed effect "Test Plugin".  Some effect options will be reset.  To avoid silently reset these same effect controsl on all subsequently loaded project, save the project and exit & re-run After Effects. (0: 25)

  2. after effects error: missing data in the file. (4: 33)

  3. after effects WARNING: your project file is apparently damaged (jumps to sections: 3). Please save under a different name.  (0: 26)

  Why this happens, and what I can do, if anything, to prevent this problem from happening.

  Thank you for your time and help!

  Arie-

  what you need to do is to make sure that the params of the older version are

  get the exact DISK_ID even in params_setup, as they did in the old

  Version.

  new params must get a new DISK_ID. Note that the DISK_ID order

  NOTHING to do with the order of param.

  If a parameter in the old version had DISK_ID = 3, and was the 3rd in the user interface, and

  in the new version, it is in the #5 index, it should still get DISK_ID 3.

  who said AE to associate a workflow of data backed up with some param. the

  Error You ' r get is when a recorded stream "slider" lands on a "checkbox.

  Param in the new version. (just an example, you get the picture)

• RoboHelp HTML crashes after emptying a project

  Hello
  
  I use Framemaker to do most of my creation and then import the files into RoboHelp HTML to generate HTML Help. As the first step of importing the files, I have to delete all the topics, table of contents entries and entries IX of the RoboHelp project. If I do this, I find myself with duplicates everywhere in the project.
  
  After the project I have empty and try to save it, HR goes belly up and I have to click through two sets of dialog boxes "Adobe Robohelp 7 has encountered a problem and needs to close." After you click 'Send error report' a dozen times, I wonder if there is anything I can do about this problem.
  
  Thank you
  John B.

  Hi all

  John, I couldn't help but notice that you said you are trying to delete ALL the content of the project. And here's where my instincts tell me the lies of the question.

  My thought is that you could take the following approach. Create a unique topic. One that will never exist in Framemaker. Only in RoboHelp. Then forget about this topic. Don't delete ever or something. Then, when you do your own out, I would take this approach.

  Clear the table of contents and Index. Does not matter the order in which you use. These first hunting just as you shoot. I say FLUSH these, because they depend on the content in the topics.
  Rinse the subjects. Hey, all, but the only subject which should remain.

  Here, my thought is that if you remove the entire system's RoboHelp goes belly up with no subject. And if you deleted the items first, RoboHelp can be gobs of updates gagging as she foolishly tries to follow all the sudden broken links to table of contents and Index items. That is why I proposed these as a first step.

  Please give it a go and let us know if it helps... Rick

• in 22 and 23.0 upgrate him disappears from the bookmarks toolbar and after crash firefox does not allow for recovery

  I hate this new update. I basically can't use the browser more. I only need firefox to do things properly, but if she cannot do these things I can't use it
  
  1. If firefox crashes (it does every 30 minutes it completely closed), then I need to be able to restore / recover all previously open windows when I start it back up again. There is no more.
  
  2. I use the bookmarks toolbar all the time, but often it appears completely blank. So now, the only way I can see bookmarks is if I go to options and uncheck bookmarks toolbar option and reselect then toolbar of bookmarks.

  It's so frustrating and worse still make you sure you can't do restorations! It of insulting and makes me want to not use your browser. A browser is a tool not criticizing a toy, but you guys will not stop playing with it.

  Also, older versions of the extension, meet bugs, you can refresh by using:

  Firefox orange (or the Tools menu) button > Add ons > "gear" button > "Check for Updates".

  For example, GM 1.5 (November 2012) vs GM 1.11 (July 2013).