Get disks win 7 recovery after disk Crash

Similar Questions

• Satellite P300 - recovery after bad crash of HARD disk

  Hello

  I have this Stellite-P300 - 1 H 8, who has had a bad HARD drive crash a few days ago.
  The primary partition of the 'system' has achieved so badly that my office he detected in RAW, no NTFS format.
  I bought a new HARD drive and managed to clone the content (some sectors were defective), now I have two options at startup:
  -Start windows the normal way, which ends with a reboot!
  -Recover, ending with a nice dialog telling me the recovery program could not start...
  I feel stuck and I would like to continue to use the original copy of Vista that is on the hard disk, what can I do?
  TIA

  Sergey

  Hi Sergey

  I presume you didn't create recovery DVDs, right?
  This disc you can install original Vista again.

  If nothing helps, you can order it on https://backupmedia.toshiba.eu/landing.aspx but I recommend you to install Win7. I did this on the P300 brothers and it works perfectly on this machine.

• Cannot get list of castle wolfenstein multiplayer game servers... just reinstalled rematch after recovery and system crash

  Had to do system recovery after a crash... re-installed Return to Castle Wolfenstein and failed to get the list of servers to show all servers even after refresh or get new list... even with or without firewall... even with virus scan turned OFF... even typed in the system to allow for the... Help

  Hello

   
  Return to Castle Wolfenstein, is not compatible with Windows7, here is the link for compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=return%20To%20Castle%20Wolfensein%20
   
  Method 1:
  Try to run the game in compatibility mode and check if it helps. Check out the following link.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
  Method 2:
  I suggest you uninstall temporary software security temporarily and then check if it helps. Sometimes, turning off or security cannot help. You can see the following link.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not uninstall your antivirus software. If you must temporarily uninstall to install other software, you should re - install it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  You can try to contact the game manufacturer for further assistance.
   
   

  Hope the helps of information. Post back and let us know the results.

   

• How can I get old libraries when I have to reinstall my lightroom after a hard disk crash

  I need to reinstall lightroom 4 on a new hard drive after a hard disk crash. Is there anyway to recover the old libraries that I created from my old hard drive and transfer it to the new hard drive?

  You have the catalog and images of the old hard drive?

• HARD need recovery disk crash

  I had HARD drive crash this morning and I need to get some of my documents.   If there is any good data recovery software available to break the hard disk crash, then please suggest me a

  Thank you...

  If the information below doesn't work, you may need to contact the data recovery experts.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• cannot complete the recovery after a hard disk replacement

  HP Pavilion m9340f Vista Home premium.

  original hard drive & replacement two seagate barracuda SATA

  After the disk crash, replaced the hard drive.

  Using Vista Home Premium SP1 recovery disks (disk w / extra) HP, has begun to recovery.

  First step was to run the tools, test drive.  Seek and scan spent.

  Put 1 in the drive and powered drive, then on it.

  Bridged system restore and went to recovery.

  All the drives used, including the additional disk.  Everything is OK

  reformat & reinstalling original content OK

  "Complete recovery" & restart OK

  Opens the window with 'startnet.command', 'building the partition' appears

  With "HP Flexbuild 2.0"appears, and then restart

  "Windows Setup" starts.

  copy of files OK

  extension of the files OK

  installation of OK features

  installation of updates OK

  end of installation - it is here that the window with the msg

  "windows setup cannot configure windows to run on a hardware on this computer.

  Is there a way to know what caused Setup to stop?

  I have no idea where to go from here.  Seagate, told me to "call HP.  Support HP told me to buy another machine, although I had to pay for the support.  This forum is my last hope.

  Can someone PLEASE suggest something.  I can't just throw this machine.

  RESOLUTION.  I had an old Western Digital 1 TB drive that wasn't Advanced Format.  Worked like a charm.  The machine retrieved and updated now.

• Reinstall CS3 Web Standard after the hard disk crash. Serial number, but check the upgrade is a problem - from Mac to PC, so does not match my product calling (Studio MX Mac)

  I'm reinstalling CS3 Web Standard after a hard disk crash. I have my serial number, but after entering, it does a check of upgrade, and at the time wherever I upgraded I also did a single switch from Mac to PC - so my product calling (Studio MX Mac) has a serial number starting with "WSM600"... ", while the upgrade check won't accept - Studio MX Mac is not yet available as an option. This happened once before and I had to work with a representative by phone (I had to click in a hidden part of one of the activation screens to get a number, if I remember correctly), but apparently Adobe that does more. And the page of "www.adobe.com/go/activiation" the phone message directs you to doesn't seem to have an option for this problem either.

  So, what is the replacement or her work around this problem now?

  Hi lkauffman,

  The serial number must be unlocked for activation.

  Please contact customer support.

  You can even join our chat support at http://adobe.ly/yxj0t6

  Kind regards

  Rave

• Try to reinstall my original Adobe CS after a hard disk crash need help, download again doesn't accept serial number CS?

  Hi, I'm late to the game here, I am trying to reinstall my original Adobe CS after a hard disk crash.  I know that the activation server has been stopped, so I went and downloaded the CS2 version that doesn't require activation.  The problem is my serial number CS is displayed as invalid on the CS2 download, can someone help?  I saw not just a download CS anywhere and their cat had is shown to be completely useless as agent just brutally told me time and again «we don't support that more»

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

  cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

  message says 'unavailable activation server this time... error code 24:24.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Problem after the hard disk crash

  I have a problem after a hard disk crash. I installed a new hard drive and the new windows 8. Then I have instastalled my After effects CS 5.5

  I noticed the serial number and it was accepted, but with the remark that he was an uppgrade.

  I have more aged to their serial number, but do not know how to give them.

  I'm sorry for my English, por, but please help me

  Leif Nilsson

  Leif, please see: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

• Try to reinstall lightroom after a hard disk crash - new hard drive

  How can I re - download lightroom after a hard disk crash. I have the serial number of the purchase but can't seem to reinstall. Help please. Thank you.

  Moving to this discussion in the download, installation, commissioning of forum.

  Holliday162 you can download a new copy of Photoshop Lightroom from your account.  Please see find a download link on Adobe.com for more details on how to download your purchased software.

• I own CS3 and I had a hard disk crash. As I had no chance to 'disable' CS3 before getting a new computer, I can't save CS3 on my new computer. It just error. What can I do? I can't put in a support ticket.

  I own CS3 and I had a hard disk crash. As I had no chance to 'disable' CS3 before getting a new computer, I can't save CS3 on my new computer. It just error. What can I do? I can't put in a support ticket.

  Contact via Live Chat customer care officer.

  Contact the customer service

  Nancy O.

• How to restore Win7 backup on the new system and drive Action Center repair after disk crash

  I have a Dell which took a 64-bit disk crash.

  I created there is not long from the center of the Action, a disk repair and backup of the C: drive on a backup USB 1 TB drive.  These two events has been made by the Windows 7 Action Center.

  I have a new installation disk in the system to replace the one that crashed.

  Is it as simple restore system on the new drive that boot from the ERD and then recognizes the USB disk and backup file Action Center?

  My hypothesis is the combination of the ERD and backup Action Center will bring my system to date content calendar when they were created?

  Problems to watch?

  If your image is on a connected USB external drive, you may need to install a drive to the external hard drive in the installation process.  So you should find a driver for it and store it on a USB key so that you can install it when asked.

  Starting the system on the ERD is simple and still works.  Just press F12 at first then select the DVD drive and click Yes.

• Re-installation of Indesign after the hard disk Crash: incorrect serial number?

  After the Crash of your hard drive, I have to reinstall Indesign. If I get the serial number in my adobe account, the said system is not valid for this product. I tried installing the CD, CS 5.5 version, but in my accout adobe InDesign 7.0 they say. What should do? Thanks as all help!

  Hello

  InDesign CS5 = 7.0

  It seems that you have a volume license, then please log in to the website of license to retrieve your serial number InDesign CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  Kind regards

  Bev

• Satellite M40: Win XP install after crash problem - ser.number system

  Hello

  I would ask you what I'll do. I bought new computer toshiba satellite m40 laptop about 5 years in London.
  There was no Win XP Recovery cd (no partition recovery on the hard disc as well), just cd with drivers of toshiba in the box. Now my system crashed.

  Took me a long time to understand what it was. (BSOD - 'not ACPI-compliant') I almost tried everything same format of HARD drive.
  Later I completely dismantled cell, cleaned up the dust inside and it works again - no BSOD.

  Now I need to install my WinXP back. So I downloaded Windows XP service pack 3 CD and tried to install it.
  It won't take my serial number I have on a sticker on my toshiba.

  Please help me, what should I do?

  I paid for WinXP (System was included in the price) and now I can't use it.

  > There was no Win XP Recovery cd (no partition recovery on the hard disc as well), just cd with drivers of toshiba in the box.

  I put t think that recovery disk came with the laptop.
  Recovery disk shipped with the laptop from the M40 because it s an old series of laptop and drive HARD recovery was not available on this old laptop series. If HDD recovery is not available and that the Toshiba Recovery Disk Creator was not preinstalled, then you will always get a disc of recovery with Notepad.

  Therefore, I am sure this recovery disk was part of the package as the other disks (disk s, tools and utilities in Toshiba driver base) were part of the package.

  The point is that the serial number which is a space at the bottom of the unit belongs to the operating system on the recovery disk.
  Generally, you may not use other Windows systems.
  The recovery disc has already been activated, and therefore, it was not necessary to activate it again.

  Please check this page of order recovery disk Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx
  Here you can order recovery disks, but I do not know if your laptop is still supported because it 5 years.