Recovery after that hibernation is too long on the Qosmio F30

Similar Questions

• Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Hi asarabia

  Fatal error documents

  Restore the original factory configuration

• Paper too long on the front

  On my new printer all-in-one HP 8610, I use A4 paper. However, whenever I try to print, whether front or front / back I get an error message saying "paper too long at Auto-duplex.  If I close the window, the printer prints normally, so it isn't a big problem, but I would be quit anyway.

  Hello @mussep,

  Thanks for getting back to me on this subject.

  Because this error appears when printing several programs on your computer, the e-all-in-one printer HP Officejet Pro 8610 there may be a problem within your printers Firmware Version of programming. Or, there may be a conflict between your Windows 7 computer and your printer HP Officejet driver. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Make a copy:

  To make sure that printer hardware is working properly, I'll ask you to perform a copy on the front of your printer A4 paper. If the copy print correctly, without error messages on the printer or the paper feed issues, then we know that something on the computer is originally this printing error.

  How to copy on A4 paper:

  1. Please load a sheet of paper for the test copy either on the flat glass on your printer or in the ADF on top of your printer
  2. On the front screen of the printer, please press copy
  3. Then, tap the settings icon on the bottom of the screen
  4. Under copy settings tap paper size. Please make sure that it is set to A4
  5. Select set as new default values. Press Yes if prompted
  6. Please make a Black or a color copy

  -Source: How to copy

  • If this print-out successfully with no errors or problems paper, that the printer hardware is working properly. This seems to indicate that the problem you are having is caused by something on the computer. Can I please you proceed to the next step to resolve this problem.
  • If the copy fails to print correctly, the problem you are experiencing is caused by your printer. Maybe it's a problem within the internal Firmware programming in your printer. Essentially, the Firmware is the "brain" of your printer and control that made the printer and how the printer it. If there is a corruption in the internal programming of Firmware on your printer, it may cause the printer to performance issues. Can I have it please click hereto download the last Firmware update. Once the download is complete, you will see a prompt to "run" the update of the Firmware. Please allow this to run. The Firmware Update utility is now launched. Follow the prompts on the screen to 'send' the update of the Firmware for your printer. Once the update has been completed successfully please make another test copy to confirm if your machine now copy on A4 paper. If the copy is now accepted, please print from your computer to see if the problem is now resolved. If a copy still fails, please do not continue to troubleshoot at this time.

  Step 2: Uninstall the driver:

  If you use a USB cable connection between your computer and your HP Officejet, please unplug this cable now.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall

  Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 3: Delete the temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 4: Install the device:

  1. Please click here to download the latest drivers for your HP Officejet.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is complete, please test print from your computer to confirm if the "too long in the Auto-Duplex document" error is resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• use marker iff section is too long for the header

  Hello everyone,

  I wonder: is it possible to implement FrameMaker using a marker iff there is one on this page?

  Here's the problem: I have a book with several chapters of different authors. Some of them used topics that are too long for the headers. For those I want to use markers.

  I know how to display markers, which I don't want, because then I have to create a benchmark for each unique position in the book (using this master page). And I know how to view the different titles for example < $paratext [H1, H2, H3] >.

  Now I'm looking for is something like this < [marker, line] $paratext >. In plain language: 'check if there is a certain marker. If there is one, show the marker, otherwise display the heading."

  Then I would be able to use the same master page and would need to use markers only where a title is too long.

  Thanks in advance

  Dennis

  Dennis,

  Take a look at http://forums.adobe.com/message/3503638#3503638

  You could create an alternative heading tag (for example InvisibleH1) with an invisible color in a framework anchored to it and can then use the building block <$paratext[InvisibleH1,H1,H2... etc.]="">. Just toggle the views appropriate to hide text in anchored frames.

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• fan stays on too long and the battery level decreases rapidly: any problem identified?

  Fan stays on too long and the battery level decreases rapidly: all identified cause problem or possible?

  MacBook Air mid-2013

  OS 10.11.13

  Processor 1.7 GHz Intel Core i7

  8 GB of DDR3 memory at 1600 MHz

  Thank you, Paolo

  Hi Paskowski,

  Can you give us a little more information about your problem?  What applications or processes are you using when you encounter the problem with your fan and battery?  The activity monitor application can provide you with some basic information.

  Use the monitor activity on your Mac.

  The resources below provides general information on how optimize the battery life and troubleshoot the battery on your MacBook Air.

  On batteries for laptops Mac

  Take care

• my own Lightroom 6 will work normally after that I cancelled my subscription to the CC?

  my own Lightroom 6 will work normally after that I cancelled my subscription to the CC?

  Yes, it works perfectly.

  Let us know if face you challenges. We will help you.

  Concerning

  Megha Rawat

• Literal string too long for the CLOB

  Hello
  My version of the database is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  When I run this piece of code, I get an error.
  DECLARE
  insCtx DBMS_XMLStore.ctxType;
  lines NUMBER;
  xmlDoc CLOB: = 'xml string is about 4600 long lines in TOAD...';
  BEGIN
  insCtx: = DBMS_XMLStore.newContext ("xmlTempTbl"); -get the context
  lines: = DBMS_XMLStore.insertXML (insCtx, xmlDoc); -Insert the doc
  DBMS_XMLStore.closeContext (insCtx); -close the handle
  END;
  
  ERROR:
  ORA-06550: line 4, column 19:
  PLS-00172: string literal too long
  
  From my understanding a CLOB leave maximum string size of 2 GB. And on top, my xml string is not greater than 2 GB (I cannot display the xml data string, refers to the business). So why I get the error too long string literal.
  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.
  Please advice.
  
  Published by: 934451 on November 8, 2012 07:06
  
  Published by: 934451 on November 8, 2012 07:07

  From my understanding a CLOB leave maximum string size of 2 GB.

  Not exactly:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/datatypes.htm#CHDDCGEE

  but this isn't the real problem.

  The error is about the "string literal" size, there is a limitation too:
  http://docs.Oracle.com/CD/E11882_01/server.112/e17766/pcmus.htm#sthref18132

  PLS-00172: string literal too long
      Cause: The string literal was longer than 32767 bytes.
      Action: Use a string literal of at most 32767 bytes.
  

  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.

  Is this a real case of production or you just test?
  In practice, we should first save the file in a variable/column CLOB (or XMLType) and then reference the content from there.

• Size of the file too large on/after export. Takes too long to download on youtube

  Hey everybody! I still have my question answered so I hope you all can help me with this. I intend to upload my videos to youtube, but there is a problem. The size of the file for the aftermath is far too large, so it takes hours and hours to load up on youtube. The size of origin when it's done export is about 2 000 000 KB... I think this is equivalent to 2 GB! It's huge for youtube. Even after that I have to encode it with media encoder, it is still huge. It does not decrease the size of the file about 2 000 000 KB 500 000 KB, which is in my opinion a GB & half fallen out of the original. But I am looking for the size of the file between 300-500 MB when I upload it to youtube. That's about 0.3 to 0.5 GB. I also used the youtube preset in media encoder export. If anyone can help me identify this problem, I would be very happy. Thank you!

  Oh it's you... with the expression of timecode. Well I see that you move on! close to there. your screenshots are the after effects render settings and output Module that are relevant to make a file without loss is to say good for further editing or encoding later. We were talking about before Media Encoder, which is what you should use to encode the files (NOT the Codec Mpeg4 that we see here). I see that you have about 5 minutes. If you want to download on youtube, you can use these recommended settings table: recommended encoding download - YouTube Help Center settings. under flow, you can see that the recommendation for 1080 video is 8Mbps. you can use these settings in the settings of your SOUL or the preset default value of Youtube, which is twice the speed of transmission. 10 seconds of HD1080 at 8Mbps is around 10 MB of files. 5 minutes will be about 300 MB. If you choose the preset, it will be 600 MB. shipment of 300 MB with a standard 1.5 Mbps download speed will take about 30 minutes.

  If you want to encode your file, you have two options:

  1 make your file using a lossless format: Animation of QT for example - then take this file to SOUL and encode using a setting predefined YouTube

  2. make and encode your files at the same time by choosing your publication by clicking on the composition-> add to the queue of the SOUL. Choose the preset of youtube

  in these two options, you can see about your final file size - this is an estimate

  

  and after that, you can download your file as expected and win the $$$ that you deserve, if people dig

  more info on the process and much more geeky information are here in my tutorial:

• Text information that is displayed too long.

  Hi, I have a table of database containing text information. I want displayt this information on a Web page, but when I try to do, the text breaks whenever I want it, so that it looks something like this:
  
  the inforamtion of my database is displayed too long. I want to
  He earlier break.
  
  instead of how I want to be shown like this:
  
  my database information
  is displayed too long I
  want to break up earlier.
  
  
  If someone could help me with this I would really appreciate it. Thank you.

  You must place your text in a table cell and constrain the width of this cell with the WIDTH attribute.

• After that update can no longer use any upper header Failed to find or use links etc.

  on firefox I can't use headers for e-mail for example... I have to go to each message and right-click to get the options to say delete it for example; If I put something in google. . and I get a search. . I can't use the box to enter another search. I use my favorites for back to google and type; the site of fox fire itself... I use fint stuf it means screen but if I want to say support. . I can't use the link provided at the top of page. . I have to type the firefox support to get to the page

  This problem may be caused by the Yahoo! toolbar that spans both down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Path too Long for the Installation of the software

  I am trying to install a version of the CAD software to one of my PCs employee.  When we run the Setup file, we get an error message too long file path.  The message says that the file path is 99 characters long, but the limit is 93.  This seems like a terribly low limit for a C: drive.

  The path goes only in a folder as well.  Thus, its C:/Program Files/Autodesk / "name of file along here."

  I understand long path problems when you go deep in several folders and the typical character limit is 254.  I do not understand why we are running in a limited issue when you have only a single deep folder on the C: drive and only have 99 total characters in the path.  Is this a problem of windows 8?  Or maybe a problem with the PC itself?  Is it possible to change the limit of characters on the C: drive since 93 is so short and also seems to be a random number?

  Justin

  Your best bet is to contact the CAD developer, we would have no way of knowing how many levels deep the software installs.

• CFC - URi too long during the passage of text string to CFC

  I have a page that allows the user to save a large block of text which is held in a < div > tag to the database without reloading the page through cfajaxproxy and a cfc.
  
  When you click on 'save' a javascript function draws text of the div block and stores it in a javascript string, which is then passed into a cfc using cfajaxproxy as a parameter to the javascript function. (ie. functionName (theTextBlockString);). It works fine except if the text contained in the javascript string var gets too long and causes a URi too long message.
  
  Display of the request in firebug, that I see the cfc is called via a GET request, which causes all my input parameters that I placed in the service to be placed in a GET url string, so of course when it is a long block of text, only the URL query string is too long, and I get the message too long URI of the CFC.
  
  What I'm trying to understand, is how hell I can pass a large text string in the EFA without encountering this problem. Is there an alternative application method so that I can't use GET?
  
  Thank you in advance!
  
  Dave

  I found the setHTTPMethod parameter used during initialization of a cfc to cfajaxproxy - you can change it to a POSITION which obviously solves the problem. Adobe, mark POST by default as AJaxCFC, CFAjax, etc.! Maybe theres some reason to have default GET, who knows...