Recovery disk Windows 7

Similar Questions

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Using recovery disks (windows 8.1) to re-install on a replacement hard drive

  Hello, I just ordered a DELL Inspiron 3000 desktop computer. I read that DELL power supply is no longer reinstallation DVD.  What happens when (if) the hard drive in the new PC goes wrong? Could I then form a new hard drive in my machine and use recovery disks (which I'd as soon as the PC happens with DELL to the top and recovery) to reinstall everything on this new hard drive? That's how would this work?

  Thank you

  Dominocat

  It's a ridiculous bunch of B.S. should not have to ask a recovery media for a system they bought which comes with the ability to make its own recovery media. I used the USB Flash method and the DVD I did when I bought the PC, and none of them works. Never do an option to install Windows. Refresh PC and PC Reset are just as useless when told your recovery media is not "valid". If I had my Windows product key that I have just to run Windows Setup, enter the key and be on my way.

  I tried to use the application form to request the media with Dell, but because I am out of warranty web page just a loop and does not always actually apply. It seems that I might have to call Dell technical support and pay by the minute (cell phone), while it is pending. Even the Support email link disappears once the warranty expires. Thank you, Dell. Appreciate the help.

  I think part of the problem is that the PC came with Windows 8 (so then the recovery DVDs were made) and since then I've upgraded to 8.1 making it "invalid". But this does not explain the new recovery USB support flash a few moments I did there are that still does not work for 'Refresh' or 'Reset' to my PC. It indicates that lack of recovery files. Should not have checked everything while bringing the recovery media?

  At this point, I have now downloaded the free version of Reflect and use to clone the old hard drive before he finally died, and I hope it will work. Good luck to all.

• Install windows 8 using recovery disk Windows 7

  I have a dell inspiron 15r turbo's (7520) with 8 windows pre installed.

  I'm a big fan of Windows 7 rather than Windows 8 so I would completely remove windows 8 and install windows 7 ultimate cost.

  My problem is now that in the future if I want to install windows 8 then the recovery disc will help me do? Please help me.

  The recovery disk does not contain the operating system. It allows you to access the hard disk recovery partition. If you install another operating system that usually makes the useless recovery partition. You cannot use the recovery disk to install windows 8 after installing another OS... If you have used Dell backup and restore, you may have other options if you chose to copy the recovery partition from the factory to the USB key. Start to the recovery flash drive and see what you can do. You can test out without actually reinstalling anything.

  To reinstall windows 8 you probably will have to ask Dell discs:

  https://www.Dell.com/support/Diagnostics/us/en/19/nondiagnostichome?c=us&l=en&s=DHS

• MSG come insert automatic system recovery disk windows & ihave not this type of dick that how can I do?

  How can I start my pc when msg came "bootmgr is missing" I have no any drive

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Formatted Windows recovery disk, how can I get that back?

  I formatted my recovery disk windows that was created or pre installed in the system by mistake the last morning.

  is their any way to recover or anything else I can do
  using hp ENVY m6-k015dx

  Recovery of the title: original Windows

  You can order a recovery media for your system here:

  Support for HP ENVY TouchSmart m6-k015dx Sleekbook

  https://h10025.www1.HP.com/ewfrf/WC/mediaOrder?softwareitem=735088-004&CC=US&DLC=en&LC=en&os=4132&Product=5395104&sw_lang=

• Model number:-n010TX: recovery of windows media 8

  Mr President.

  I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

  It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

  1 open the folder to view the files, and

  2. don't do anything.

  Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

  I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

  Thank you

  Hello

  If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

  http://support.HP.com/us-en/document/c03489643

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• Question related to delivery to zero laptop to factory settings using the recovery disk

  I tried to give my knees to its factory settings, but it took a recovery disk Windows that I have no idea about.

  Where can I find it?

  Hello Rumourio,

  Yes you are right, if you perform a factory reset in this computer that has Windows 8.1 will now change all its files and settings Windows 8. It seems everything as it was when you bought the computer.

  Hope this information helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• Can Tecra M9 - I upgrade the RAM and get a Windows 7 recovery disk?

  Hello!

  I want to know if it is possible to upgrade my Tecra M9 about RAM - memory? I think that I now have 2 GB.
  I also need to know if Toshiba sells a recovery disk to my computer with Windows 7, or do I have to buy a Windows 7 disc and serch for drivers on my own if I want to have the new operating system?
  My language on the portable computer setting is Swedish.

  Cordially Mikael

  Hello!

  I also put t know how much RAM have been mounted, but I checked the Tecra M9 user manual and it can be upgraded to 4 GB of RAM. This means that you need two modules with specification of SO-DIMM DDR2 200pin for upgrade. In the user manual, you can find some information about it.

  On the issue of Windows 7, I think that Toshiba will not release a Windows 7 recovery disc because this model isn't Windows 7 supported:
  http://APS2.toshiba-tro.de/KB0/KBA9A02PX0000R01.htm

  You can install Windows 7 from a Microsoft disc but you will have to collect the drivers on different websites or other, you use the Vista drivers.

  Welcome them

• Lost the disk for recovery of Windows 8 for Satellite C855 1v9

  Hello

  I bought a new laptop (toshiba satellite) 8 original windows pre-installed,
  However, I wanted to repartition my hard drive and without warning I deleted the recovery partition, therefore, the laptop could no longer starts.

  So I asked a professional if he could get my laptop to its original factory condition as it was when I bought it (with 8 pre-installed... original windows) in order to sell it later and he told me that it is impossible since I do not have the recovery disk, and the only way to make it work is by installing windows 7.

  I have lack of knowledge in it staff that's why, I haven't had not to make a copy of a recovery disk.

  Now, as I intend to sell my laptop, I was wondering if there is a possible way to sell me the recovery disk that allow me to back up my laptop to its factory condition (with original windows 8 pre-installed and pre-loaded software of course), and the estimated total costs that I pay.
  PS:

  * My laptop information:

  • * SATELLITE C855-1V9
  • * CORE I5 - 3210M
  • * 2048 MB 1600 MHZ
  • * 500G HDD (5400 RPM) SATA
  • * 39.6 CM TRUBRITE HD LED
  • * DVD-DINNER-MULTI DRIVE
  • * COLOR: LUX WHITE PEARL
  • * BLUETOOTH W - LAN (802.11B/G/N)
  • * WEB CAMERA
  • * MS WINDOWS 8

  I also have: product code, serial number, MAC LAN, WLAN MAC
  Eather way, thank you for your support... looking forward to hearing from you soon

  happydz

  Hello

  Original recovery image, you can order on https://backupmedia.toshiba.eu/landing.aspx
  Using this drive you can install the original recovery image and your laptop will have factory settings again.

  If you have any other questions do not hesitate to ask.

• Creation of recovery disks after upgrading to Windows 7

  My laptop was provided by Toshiba with Vista. He was eligible for a free upgrade to Windows 7. I did it. Problem is that the recovery disk is for Vista.

  How can I do a recovery for my laptop disk, because it is now the Windows 7 operating system?

  What folder of hard disk image:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If this option is still available, you can restore Vista and make a recovery disk.

• Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

  Hard drive of my Satellite Pro A300 failed. It has now been replaced. I ordered a recovery disk.
  This will allow me to reinstall Windows Vista OS that is installed initially?

  Also, I get this message "BOOTMGR MISSING". The recovery disc will fix this problem too?
  Thanks in advance!

  > I ordered a recovery disk. This will allow me to reinstall Windows Vista OS that is installed initially?
  Yes. Without a doubt.

  New HARD drive is recognized correctly in the BIOS settings?
  If so avoid any problem.

  Moreover, A300 works perfectly and much better with Win7 32 bit.

• How to format and re - install Windows 7 using recovery disks/Partitions?

  Hello..

  My product-

  HP DV4-5109tx

  Windows 7 (64-bit)

  I have a free space of 78 GBs that I'm not able to use... As when I try to use the "disk management" and right-click on the free space to "format partition" this option has been grayed out... !!

  Please suggest if I can use this space without formatting? (I was suggested for formatting)

  In addition, due to some other issues too I want to format my Windows (and reinstall) IE drive C so that the free space problem can be solved... Also I don't want no data in my other drives to be formatted...

  I have the recovery partition and the recovery disks sent by HP...

  Please help me how I can use them to solve my goal...

  Thank you

  It's simple, as I suggested in my previous post.

  Once you have a drive like the one on the image management window simply click New Simple Volume. Create a new partition called "New Volume". Make a right click on it and the option to format it will appear.  The strips on the 75,38 GB of free space in your image indicates that the selected action will take place on this point in the disk management window. You can change the name for the new volume in Windows Explorer.

• Satellite L505 - 10K - recovery disk contains only Windows 7 32-bit

  Hello, I have a question.

  I bought a Satellite L505 - 10 k a month ago. It came with Windows 7 x 64, 3 partitions (I don't know why, 3? seriously?). I tried to install Linux, delete the last partition, called 'Data' and I screw them completely. I used the recovery DVDs to bring the phone to default settings and I discovered the system recover is Windows 7 x 32.

  No idea why the systems are different?

  It's just a minor issue, I guess, the only bad thing is that the x 32 system recognizes not the 4 GB of RAM. I use now only 3 GB of RAM.

  Hi Cabo_Nobbdy,

  I think you should check your user manual and the specificaitions of your laptop first before starting a question. I founded the following information:
  + Operating system: Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and Genuine Windows 7 Home Premium 32 - bit (Toshiba-Recovery DVD) +.

  This means that the recovery for Windows 7 64-bit disk, you need to create by * you *!
  The DVD that came with your laptop recovery contains only 32-bit Windows 7, and normally, you can create the recovery disk using the Toshiba recovery disc creator. I put t understand why you didn't do it because after the first start, you get this message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s too late for that and you have to order a new Toshiba recovery disc yourself:
  https://backupmedia.Toshiba.EU/landing.aspx

• Reinstalling windows without the recovery disks.

  Hi, I have a lot of garbage on my computer and I would find none of my recovery disks to reinstall windows and wipe the whole model but as Ive moved repeatedly since the purchase of this laptop or my windows vista disk. Is anyway that I can do this without using discs or is there anywhere I can get what I need without charge?

  Thank you.

  Hello

  Is there a way to recover the laptop without use of the recovery disc.
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  But this procedure is not available on all Toshiba laptops. Only a new generation of portable supports this process.
  Check it out