Recovery disks to restore the recovery Partition, laptop Aspire 7740-5691

If I use the recovery discs (3) and the disk driver and application to re - install Windows 7 on my Acer Aspire 7740-5691 will restore the recovery partition. The recovery partition is 11,72 GB and 100% free space and in good health, according to the information in disk management. I don't know how the recovery partition wiped but the computer is running right now. The discs were made when I bought this computer about 5 years ago. The HDD is 320 GB, the processor is intel quad core i3, ram is 4 GB. Thanks in advance for your comments and information. Oscar1

Acer erecovery media will restore your laptop to factory default, so, Yes, it will restore the original recovery partition too.

Tags: Acer Desktops

Similar Questions

How to create a disk to restore the system to Vista Home x 64 sp2?

I want to create a disk to restore the system to the x 64 Vista Home sp2. How can I do this?

Hello

Contact the manufacturer of the computer

It's their recovery process, not Microsofts

Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

Hi all

Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

Here are the specs:

1 Macbook Air 11.5 "running on El Capitan (10.11.1)

2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

Before the accident yesterday, it was working OK.

Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

I can assemble and disassemble a USB stick very well.

Any help would be appreciated.

Thank you!

Maybe you can explain a little better.

I would like to make some general comments before having your replay.

It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

For TM, the rule is that the drive is about 3 times the size of the boot disk.

Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

Have another drive formatted NTFS for Windows.

Restore the OS partition without erasing the current user profiles

I have a two year old iMac that cannot be started after we had a power failure. Unfortunately, my son tried to start it again until I got the chance to run disk utility. He got started, but there were mistakes then he shut it down, however I could not restart even in safe mode. In Recovery mode repair disk is a failure and recommend restoring the backup.

The problem is that the last backup is one month because my Time Capsule was full, so I bought a newer backup drive and turned off automatic backups to attempt to transfer the largest disk backups. I had trouble to permission to do and haven't done before the failure.

So, I managed to use target disk Mode to get a copy of my families users folders. Potentially, I could restore the old backup, and then restore missing files manually, but I want to know if I have a choice.

Is it possible to reinstall the OS X partition without destroying the partition of work that has applications and user profiles?

I am running 10.10 and 10.11 (I don't remember if I've updated before this problem) so maybe it's on instead of El Capitan Yosemite

Yes. Reinstalling the operating system or erase the partition containing normally will not affect the other partitions, but data on them should still be backed up.

(138242)

HPE 270e initialize system repair disk to restore the System Image

I am really enjoying my new HP HPE 270e Win 7 HP x 64 computer desktop, but for some reason, ESC, F-1, F-8, F - 10 and F - 11 key do not work properly and when restoring the system came out the other day I was forced to restart from Factory Image DVD who put me several weeks back and I was forced to start again set up my computer.

Before all this happened, I saved an Image of the system 2 different external drives of 1 TB and a Win 7 system repair disc to use to retrieve the System Image, but my office of 270e HPE will not recognize the disc. Nor will it recognize the Macrium reflect Win 7 PE 2.1 "Rescue CD", which will get 2 more pictures system I saved. Even when Windows does not shut down properly, it is impossible to select options indicated to "Start Windows normally".

According to the blue HP color screen, by pressing the ESC key will allow to the entry of 5.28 BIOS TRUCKEE 1.04E01 of the motherboard to enable the computer to boot from CD/DVD, but I'm currently not able to select ESC or any other option besides. I studied the 5.28 BIOS and it will allow booting from CD/DVD and I hope someone here can instruct me as to how this feature can be activated.

I have a laptop HP with Vista and every time it starts, it offers access to the ESC and F key options, but just HPE 270e Office ignores this screen and sails right through startup in an average of 20 seconds. Even if I see a quick start that I would gladly seconds on the screen startup options if only I could find a way to enable.

I appreciate any help with the activation of these startup options in my office of 270e HPE. I spent 5 hours talking to HP Technical Support and all the help they could offer said me "these options will be presented if you need. Well, the possibility of restoring a system from the system repair disc Image is intended for Win 7 did not appear, and I hope that I will be able to acquire knowledge of the implementation of this basic option in Windows 7 Home Premium.

~ Maxx ~.

Although I still don't know why my HPE-270e will not recognize recovery media yesterday I finally could add the Macrium Reflect PE v2.1.2866 my computer Windows 7 start menu and I am now able to boot into Win 7 or consider recovery environments without using the repair disc Windows or the media reflect rescue...

~ Maxx ~.

How to restore the original partition after reformatting accidentally installing windows 10

See the problem below. I can not get a USB stick formatted with FAT to be recognized by bootcamp or to download the drivers to continue.

The problem occurred after that my son wanted to re - install windows 7 after that that he has been upgraded to windows 10 and utilities disk to reformat the drive hard windows installed.

OS X Terminal, you can post the output of

diskutil list

Formatting disk to restore the operating system

adv. on HP Paviliondv600 system restore procedure

If you formatted the hard drive and that you have no recovery disk, you will need to Contact HP to order a set.

Restore disks HP restored the OS badly on my dv8320

Hi all, I bought a computer laptop dv8320 a few years. Recently, I decided to upgrade the two 80 GB drives to a pair of 500 GB Western Digital drives and instead of cloning the OS I have rebuilt from scratch using 4 dvd - rom restore disks. To my surprise last night I realized that even though I was using XP Media Center Edition 2005 factory disks gave back me to Media Center Edition 2002. The COA on the bottom of the laptop is a certificate of authenticity for the 2005 edition, and I jumped into the old drive 80 just to make sure I wasn't wrong, and indeed, the original factory OS is Media Center Edition 2005. Now, I have not as yet noticed any loss of functionality or something but I do it for some feel cheated little reason...

All this experience? HP offers a restore disk for the operating system, that I actually allowed or am, that I just stuck with the 2002 version?

Hmm no, there are a few functional differences between the original 2002 MCE-MCE 2005. As I have said that I have not noticed differences, however, I don't know that some differences I notice whenever I go to burn a DVD of Moviemaker. Hey I know that is not the greatest, but it works for me. Well he used to work for me, in any case there are tons of other usability issues that I'll be stuck with for example media center extender for xbox 360, supported for both my tuner, a HP expresscard tuner and a tuner Hauppauge USB2TV...

In any case, I'm just curious.

Well well apparently http://www.microsoft.com/downloads/details.aspx?FamilyID=e5daf37e-e243-4410-bc51-81cf2b56fe6e&displaylang=en adds the functionality of MCE 2005 to all the devil of this version of the operating system is.

Message edited by Helzy on 03/18/2009 20:45

Free disk space on the C partition

Separated from this thread.

I am also having the same problem. I am running Vista Home Premium SP2. I was getting close to complete on my drive C (13% free space). I was shocked to see how quickly it filled up, almost as if he did it by himself. I was downloading a lot so I had no idea how it happened. I ran each program cleaning and each antivirus that I had to try to make room. I cleaned up program files deleted a bunch of audio and video files, and it does not seem to do much more of a difference. I shut down the computer for the night and is returned to him the next morning. I ran and bought a few flash drives to transfer files more and when I booted up I checked the hard drive and it was back to 48% free space (as it was before). I have no idea what happened, but so far, it seems to be fixed...? one of the cleansers I ran also ccleaner.

Free disk space

Last updated 18/01/2014

Content
- To see how much space you have used and free
- To see where the files are too much space
- Disk Cleanup
- System restore
- Fix the basket
- Fix temporary Internet files
- Delete files in the system and the folder Temp of Service Profiles
- Check the size of the swap file
- Disable the hibernation
- Compact the Windows databases use various
- Delete the files updated by the Service Pack
- Move your Documents
- Remove saved files created by Photo Gallery
- Which extends the size of the disk
- Compress files
- Turn off the low disk space warnings
- Boost disk cleanup
To see how much space you have used and free

Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

For the system drive

WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

For all readers

WMIC volume get/all, freespace, the ability, the legend

If you want to store this info on your desktop

WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

To open double click on Free Disk Space on your desk or type

Start "" "%userprofile%\desktop\Free report.HTML of disk space.

Then come back here after cleaning and repeat these commands to see the difference.

If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

% Lecteur_systeme % - one defrag

or

dir %systemdrive%\*.*/a/s

To see where the files are too much space

It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.

To see the size of the folders in Documents, excluding images, video, or music files.

for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

To see the size of the folders in the music.

for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the image files.

for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the video.

for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files on the desktop.

for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the Windows folder.

for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the Program Files folder.

for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

Disk Cleanup

To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.

Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.

Disk Cleanup can be started from the command line.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To make your primary drive.

cleanmgr letter

Choose which lead to do.

Cleanmgr

See the last section of this post to see how to performance of disk cleanup.

System restore

With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

Double click on DiskPercent and click on decimal and change the value to the desired percentage,

You can change the command prompt.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the size of the system restore folder.

You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

takeown /f "%systemdrive%\System Volume Information" / a r d y

ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

dir "%systemdrive%\System Volume Information" / a/s

To see the current percentage

Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

To set a different value.

You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

To repair the system restore, file delete and restart the system restore.

SC stop vss

takeown /f "%systemdrive%\System Volume Information" / a r d y

ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

e "%systemdrive%\System Volume Information" / q/s

SC start vss

Fix the basket

Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

Empty the trash.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the size of the files in the Recycle Bin

It must have one or no files inside if you work. There should be a directory (folder) by user.

dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

To reset the trash

e % systemdrive%\$RECYCLE. BIN/s/q

Fix temporary Internet files

Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the temporary internet files size empty files folder

RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

Then delete.

Close Internet Explorer and the Explorer first. Some files may not remove at the moment, they can be deleted later.

"%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

also the DOM store, similar to TIF.

"%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore" del /s /q

So to see the new size.

dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

To see the size of the cache, type the following

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.

Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)

Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f

Delete files in the system and the folder Temp of Service Profiles

The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To the list

dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

To remove

del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

Check the size of the swap file

As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see what was your use

WMIC pagefile get List

To see the size of the file on disk

dir /a c:\pagefile.sys

To change the size or change the road see change the size of virtual memory in Start - Help and Support.

Disable the hibernation

The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see if it is on

If the file will be found. If off the file won't be there.

dir %systemdrive%\hiberfil.sys /a

To turn off

powercfg-h off

Make a u-turn

powercfg-h on

Compact the Windows databases use various

You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

See how much space taking up type which is below and note the total size (because it scrolls away).

Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

Then at compact

SC stop wuauserv

stop bits SC

SC stop wsearch

SC stop cryptsvc

for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

SC start cryptsvc

SC start wsearch

SC start bits

SC start wuauserv

Then to delete some temporary files.

del c:\*.integ.raw c:\TEMPDFRG*.edb/s

To see the new size and compare it to the old size

dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

If a program has a file open, you can use this procedure to find out which program.

openfiles/local on

Reset

openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

Delete the files updated by the Service Pack

See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

This will remove the ability to uninstall service packs.

According to the service pack that Windows was provided with you can have both, one or none of these two files.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

dir /a /s c:\Windows\WinSxS

Then type

Vsp1cln.exe

COMPCLN.exe

To see the new size and compare it to the old size

c:\windows\WinSxS dir /a /s

Move your Documents

If you have another disk, you can move the documents folder to it.

Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

Delete the thumbnail and icon Caches

These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

To see the size

dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

then remove

Taskkill /im explorer.exe/f
attrib - r s h '% userprofile%\AppData\Local\*.db '.
attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
del "% userprofile%\AppData\Local\*.db".
del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
Explorer

to check the new size

dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

Remove saved files created by Photo Gallery

Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

Images of the hull: original

Delete the ones you don't want.

Which extends the size of the disk

If all the space on the disk has not all been used it is possible to extend your drive.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

DiskPart

then type

Select the c volume:

Then type to see in size

the list volume

then (it will work if possible or not as appropriate)

extend

type to display the new size

the list volume

then type exit

output

If you want advice on the extension of the partition type the following and paste the result back

DiskPart

list disk

the list volume

Select disk 0

partition from the list

Select disk 1

partition from the list

output

To copy the final text right click in the window - Mark , then select the text and press enter.

Compress files

There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

To use a command line to compress the files in the Favorites folder.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

compact/c /s:"%userprofile%\Favorites." *

Put in Favorites to compress files added

compact/c /s:"%userprofile%\Favorites.

To view the details of the compression of the Favorites folder

Compact '% userprofile%\Favorites\*.* '.

Turn off the low disk space warnings

To disable the function to display the disk low space warnings.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

gpupdate/force

Boost disk cleanup
- Operation of disk cleanup
- Schedule disk cleanup
- Creating custom cleaners
To see a list of products of cleaning disk cleanup.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

@echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i
```
 List of cleaners
 ================
 Active Setup Temp Folders
 Content Indexer Cleaner
 Downloaded Program Files
 Hibernation File
 Internet Cache Files
 Memory Dump Files
 Microsoft_Event_Reporting_2.0_Temp_Files
 Offline Pages Files
 Old ChkDsk Files
 Previous Installations
 Recycle Bin
 Setup Log Files
 System error memory dump files
 System error minidump files
 Temporary Files
 Temporary Setup Files
 Temporary Sync Files
 Thumbnail Cache
 Upgrade Discarded Files
 Windows Error Reporting Archive Files
 Windows Error Reporting Queue Files
 Windows Error Reporting System Archive Files
 Windows Error Reporting System Queue Files
 WLX Thumbnail Cache
```

What is the right way to expand the virtual disk and then the OS partition?

I have a Windows XP operating system in a virtual machine VMware. I have
you want to increase the size of the hard drive. It currently has a 50 GB
partition on a 50 GB VHD. I increase the size of the
50 GB to 100 GB in VMware virtual hard drive. Then, can I use
Windows disk management to increase the size of my partition of the
side OS to use all the 100GB he sees now? Or will
corrupt my data or cause a problem as I really need to
use a third party tool like EAUSUS inside Windows to extend Windows
on the size of the virtual hard disk?

In fact the way you describe, resize the virtual disk and then developing the partition are the way to go. But there are some things that you should be

aware of.

-If the VHD is on an IDE controller, you may not be able to resize the virtual disk. In this case use the converter. With the converter, you can resize the disk including the partition and - if desired - replace the IDE controller by a SCSI controller.

-If you have only one partition under XP (that is, drive c :)) you cannot extend the partition with the diskmanager/diskpart. In this case, start your virtual machine from a CD/DVD Vista/Windows 7 in Repair Mode, open a command line and use "diskpart" from there to "extend" your partition.

André

Restore using the recovery disks on Inspiron 15 3521 supplied with Windows 8 Pro. Question on the recovery partition.

I created by the user recovery disks. I created them the day I got the computer and he made three of them. My brother has deleted my recovery partition just now. My question is, if I resumed my Inspiron 15 3521 using three recovery disks that I created, be it recreate the recovery partition in the process? I just need an answer to this question, not responses indicating that, if I have the disks, I don't need the recovery partition, why would I want the recovery partition if I have the drive, etc. I would like to just a simple answer to the question. If I use the recovery discs, it will recreate the partition recovery with all the info, she was in it when I got to the computer? Once the recovery is completed from disks, will be that recovery partition be there as the day I got the computer, so if I wanted to (I don't want to, but I'm just a question) I could still create the recovery of her discs? Basically, the computer will be exactly as it was the day I got it home, recover partition and everything? Or, it will restore the computer to the new plant, but not to re-create the recovery partition with everything she had in it the day I got it?

Thanks in advance.

Yes, it will be if you select the correct option.

See these videos:

http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/4794.21-Windows-8-restoring-from-recovery-media.aspx

Recovery of factory - "deletes all data and resets the Partitions.

Updating of the factory - "Only restores the System Partition and keep other Partition content".

It might be good for you to ask a Windows OS DVD 8.0/8.1 just in case the recovery media works however.

Restore the partition from the Satellite Pro A200 recovery

Hello

I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

Any ideas on how I can either:

(a) wrong recovery tool by using the recovery partition
(b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

your

Frank

Hello

> accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
You can rename only the partition NTFS FS. This can be done in the disk management console.
But I don t think this will solve this problem.

It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

Good bye

Recovery disk is deletes the data at the 2nd disk on Satellite A300?

Hello
I use a laptop Toshiba A300, which has 2 hard drives (250GB). The laptop has Windows Vista Home Edition 32-bit installed, but I want to change for Windows Vista 64-bit, which comes with the recovery disk, in order to use all 4 GB of RAM.

I have all the backup data and move them to the 2nd HARD drive (D, C named first name).

So I wonder if Recovery Wizard will delete the data of the two hard disks or just a 1st.

Thanks in advance
Kevin

Hello

Your laptop was equipped with HARD drive recovery option allows you to create the own Toshiba Recovery disk which would be contains the preinstalled operating system.
In your case the Vista 32 bit.

And Yes, install from the recovery disk format the whole HARD drive and removes all the disk, also of the second partition.

That's why to create the recovery disk before you install or change anything on the HARD drive

How to restore the latest version of a laptop installed with the version of xp home edition authentic which is corrupt and ineffective at present.

In the light of the announcement that the xp version support will be withdrawn w.e.f. April 8, 2014, I want to restore the B205 Toshiba laptop with the latest version to recover the notebook. Please suggest measures to be initiated at the end.

Hello

Here is the Vista Forums, not XP.

There is no available from Microsoft Windows XP download.

You can contact your computer manufacturer and ask them to send you a set of recovery discs, if it is still available.

They should do this for a small fee.

"How to replace Microsoft software or hardware, order service packs and replace product manuals.

http://support.Microsoft.com/kb/326246

And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

Ask them to the proper key sequence.

Toshiba is press 0 (zero) to start to start the process of relocation/restore to the way you bought in later operating systems.

You will still need to install all of the SPs, updates, etc.

See you soon.

If I install Windows 7 on a computer with Windows Vista, it erases the manufacturer partition that allows me to restore Windows Vista?

I have windows vista basic on my laptop & also my laptop can reinstall vista (I think that it is on a separate partition) so for my question I want to install windows 7, if I have it will remove this partition that can re - install vista?

original title: installation using Windows 7

Hello

It depends on your computer maunfacturer as to whether you will be able to always use the vista recovery partition after installing windows 7

Hewlett Packard machine; No, you can not

Read about this HP:

Solve a common problem of recovery.

If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

________________________________________________________________

Here are the different ways to reinstall Vista

Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

they do it for a nominal cost of $

____________________________________________________________

also ask them if you have a recovery partition on your hard drive to get back to the way you bought

you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

Ask them of the exact key sequence

__________________________________________________________

or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

they contain all versions of vista

This is the product key that determines which version of vista is installed

http://www.theeldergeek.com/Vista/vista_clean_installation.html

____________________________________________________________

How to replace Microsoft software or hardware, order service packs and replace product manuals

http://support.Microsoft.com/kb/326246

______________________________________________________________________________

Information of Windows 7:

so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

check with them

and read this

Windows 7 upgrade advisor

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

Windows 7 system requirements

http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

Windows 7 upgrade paths

http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

Compare editions of Windows 7:

http://Windows.Microsoft.com/en-us/Windows7/products/compare

Windows 7 Compatibility Center to check software and hardware compatibility:

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

Windows 7 price:

http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

_____________________________________________________________

and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

Recovery disks to restore the recovery Partition, laptop Aspire 7740-5691

Similar Questions

Maybe you are looking for