Palm Zire 71 and Windows 7 - device is not recognized

Similar Questions

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Code 19: Windows Mobile Device icon not found on my computer

  Original title: Windows Mobile Device icon not found on my computer

  Hello

  I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.

  Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.

  In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).

  Hi AlgeriaRocks,

  I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.

  For more information see the link:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the device in Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You see the support of HP at following link and try to update the latest version of the drivers.

  HP iPAQ h1900 Pocket PC series-download drivers and software

  For more information, you can also consult the following link:

  Error conditions (performance, beeps, etc.)

  Hope this information is useful.

• The internet connection on my laptop and other portable device, but not in my office.

  Data sheet:

  -Windows 7 Ultimate 64 bit

  -All browsers and devices are up-to-date.

  Questions:

  I have this problem since yesterday and I tried to solve this problem since.

  The problem is that on my connection (WiFi) network, it says I have access to the internet, and of course it does because I can use internet without problem on my laptop, iphone and other portable device, but not in my office. It says I have an internet connection and when I ping a browser it answers correctly and it gives me all the Member States and other information.

  When I troubleshoot it it gives me something like "your computer seems to be configured correctly, but the device or resource (www.microsoft.com) is not responding." I thought it was a DNS problem so I reset everything, but no luck. Here are things I tried to solve this problem.
  -Reset TCP/ip using cmd.
  -Check if the IP is obtained automatically.
  -Check if I'm using the proxy server.
  -Rebooted (reinstalled windows)
  and many other things that I have searched on google
  But these proposals did not fix the problem.
  Here is my IP config
  
  
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Genie2Stonk-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-17-D1-F7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-17-D1-F6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1d3f:8912:70e:57e5% 13 (Preferred)

  IPv4 address: 192.168.1.3 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: December-01-12 01:45:01

  End of the lease...: December - 02 - 12 01:45:06

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 208184260

  DHCPv6 DUID customer...: 00-01-00-01-18-4A-2D-A4-64-31-50-35-E9-3F

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {40B4470F-DE12-452A-ADBA-A425B5329C34}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:1419:b1f:3f57:fefc (preferred

  EXEs)

  Address IPv6 local link...: fe80::1419:b1f:3f57:fefc % 12 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  C:\Windows\System32 >
  I can't understand what I've tried so many things and nothing never gave me a connection back Please HELP.
  If I need to provide more information please let me know.
  Thank you.

  Hi zinx2op,

  Thanks for posting your query in Microsoft Communities. The description of the problem, I understand that you are not able to connect to the WiFi of the desktop computer. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         If it works well before?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.

• First Pro CS 6 and Windows 10 - projects do not play in the timeline

  I bit the bullet and upgraded to Windows 7 Professional, Windows 10.  I had heard people say that first Pro CS 6 worked in Windows 10, so I was anxious to make the upgrade, but I was sure that it works ok.

  Boy, I was wrong!

  I can open previously created first Pro CS6 projects, and everything looks good on the timeline.  But the project will not play!  The "play" button on the changes in preview to the "Stop" button, but the current-time indicator does not move forward and the video does not play.  I can rub very well through the timeline.  If I press the "Stop" button, it won't come back on the 'Play' button, as it should.

  I tried to create a new project, import a video file and try to play it, but the same thing happens... it won't play.

  Any ideas?

  Thanks for your quick response. I solved the problem, just before that I received

  your post above...

  I realized that I had no sound at all... no windows sounds, nothing. My Realtek

  High Definition Audio sound card on my motherboard did not work. He has been

  selected as default in Windows playback device, but not sounds were

  to come. I selected another audio device and then switched back to

  the Realtek device and I had sound. Just for fun, I opened a project

  First, and he's now come back normally.

  Now, if only I could get all the 5.1 speakers, it would be

  large. It seems that I currently have audio '3.1' now! Realtek web page is

  not very useful to provide drivers. The configuration program for the

  sound card think it has side speakers, but they make no noise!

  Thanks again.

• Windows media player is not recognizing my mp3 creative zem m300 player

  Windows media player is not recognizing my zen m300 mp3 player creative I have two of these one with each firmware version. I uninstalled and reinstalled computer driver recognizes the drive as a separate disk drive will play even files but will not recognize the device if I can sync the music. clearly, it's a matter of media player I can see im not the first to have the problem and nobody has really found a solution. is it possible to go back to an older version of media player to make it work.

  To clarify, the device presents itself as a removable drive in the start menu > Compute, correct?
  If so, can you get the files back that way?

  Were you able to sync previously?

• The mistake that the USB device is not recognized... Help, please...

  I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Mass storage device is not recognized in Windows 7 (x 86 and x 64)

  My mass storage device has been recognized in Windows 7 before with pilot USBSTOR. SYS (ver 6.1.7600.16385). However, it is not recognized more with the new driver USBSTOR. SYS (ver. 6.1.7601.17577)

  My mass storage device can be recognized by Windows Vista (x 86) as a removable disk (FAT file system).

  Y at - it a fix for this problem for Windows 7?

  Thank you.

  Allen

  Sorry I've updated my question that the current VER is 6.1.7601.17577 and it does not see my mass storage device which is a feature of WinCE 5.0 in charge of priming mode.

  The previous version 6.1.7600.16385 works well because I have a test PC Win7 did not install all updates.

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• Bluetooth randomly, and now the device is not detected

  Hello

  I bought a laptop 15-J108la want a month ago (8.1 Windows 64). I also bought a Microsoft bluetooth mouse to use with it.

  I first noticed mouse stoped working randomly, maybe 2 times a day. Sometimes it was enough to turn off and on again to get it back, but sometimes I had to reboot.

  I updated the driver bluetooth (Bluetooth 4.0 Driver Intel, 2014-01-18, Version 3.1), the problem persisted, but seemed less frequent.

  After you install an update for the wireless network card device manager today announced that Intel Bluetooth 4.0 device has been failing. Try to dissable and reactivate, but the device has simply disappeared. Now the Device Manager indicates an "unknown USB device" with error 43, and Bluetooth devices are not detected, no matter how many times I reboot.

  Any help will be much appreciated.

  Ricardo

  Using the generic drivers provided with windows 8.1 instead of Intel drivers, finally solved the problem.

  No more intermittent, peripheral stranger either.

  I was foolish enough to install the latest driver updated to Intel to see if it has addressed the problem, but it was as bad as before. I had to go back to the generic drivers, once again and voila: everything works like a charm again.

  I hope this helps others.

  And Intel: come on, you should do better!

  Ricardo