Recovery media error

Similar Questions

• Satellite Pro C660-239 - restore from recovery media error

  Hello!

  I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

  The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

  After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

  "the file or directory is corrupted and unreadable."

  The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

  I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

  One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

  Y does it have that no change in the recovery media is corrupt?

  Could also be a motherboard problem?

  Thank you

  > Is there any change in the recovery media is corrupt?
  Of course, this is possible.
  In case the HARD disk is OK, the recovery media may be damaged.

  > Could also be a motherboard problem?
  I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• Re: Satellite C660 - recovery media error - CRC failed

  Hello

  I did the 2 toshiba floppy recocery
  I got a virus on my laptop so I I placed disks in my laptop

  I did the following:
  -place the drive in the laptop
  -reboot
  -Started from the dvd
  -follow the instructions
  - then you have to copy 2 of 9
  -then error: copy of splitpart or the Canadian Red Cross has failed

  can anyone help?

  I'm afraid there is no Mr. help something must be wrong with recovery DVDs.
  Do you use it for the first time?

• NB 300 - error when using TOSHIBA Recovery Media Creator

  I wanted to create a media recovery since the purchase of my NB300 but when I use the TOSHIBA Recovery Media Creator, once the State comes to halfway it comes up with an error:

  Differences where found in the following files.

  The source path:
  D:\HDDRecovery\SWImg\10758XSP3. STORMWATER MANAGEMENT

  Target path:
  E:\ZZImg\10758XSP3. STORMWATER MANAGEMENT
  (Error code: 02016F-3 c-00000000)

  Can someone help me with this problem

  Any help is appreciated
  Thank you in advance

  I found a similar question on the Toshiba U.S. forum > click HERE.

  I also think that the recovery files are corrupted and you need is original Toshiba recovery DVD.
  Is that you get to laptop with OS preinstalled and you should be able to create recovery discs. Try to contact the closest service Toshiba and explain the situation. If you didn t change anything on the system is not your fault and maybe you will get the discs for free.

• Portege Z930 - 10 p - ERROR recovery media: F3-F100-0008

  Hello

  I used Toshiba Recovery Media Creator to create 2 recovery media on a USB for my Z930 flash drive - 10 p. Then I removed all partitions on SSD computers. The problem is that the recovery process will not work. In this case:

  1 "Windows is loading files" appears on the screen
  2 "starting Windows" and the Windows 7 animation logo appears.
  3. then the marker is displayed for a few seconds before...
  4. an error message * ERROR: F3-F100-0008 * appears with the instruction "Please press OK to turn off the computer."

  I tried the two USB flash drives. What does this error mean?

  Unfortunately I put t know what exactly Mans this code error, but on different forums people are speculating on some failure recovery image, memory or HARD drive.

  In your situation will help any good answer. Problem is that you cannot use USB created recovery keys and at the same time you ve made the biggest mistake and removed the saved on the SSD drive recovery image. Now, it is not possible to start the HARD/SSD recovery disk image installation.

  It is: what you can do now? You can try to contact the nearest Toshiba service provider, explain the situation and ask for help or advice. Otherwise, you need to order original recovery recovery image installation installation disc.

• NB205 error recovery media

  I recently bought a NB205-N310BN-G, for which I thought was a good deal, but now having doubts. It came without an operating system, and the previous owner said it had deleted all partitions as well. No problem I thought and bought USB support of Toshiba Recovery, connected according to the instructions, switched to the USB option Start menu and here it goes on for about 10 seconds after it reads the device, it appears a screen titled above:

  Toshiba Recovery Media
  then he reads

  Error: F3FF000001
  then says in

  Press OK to turn off.

  And as it turns out after pressing ok.

  I check the bios and even reset to system default will sequence start and followed the instructions with the same result. I can't find anywhere what this code is, or what to do. I called Toshiba and the automatic answering service told me they have a new number for technical support, and then disconnects. As you can guess, it's very frustrating. Hope some can shed some light on this problem because I am completely lost at this point.
  Thank you
  Rick

  Try to remove all partitions on the HARD drive, then run a HARD drive test to check bad sectors. Google 'Hitachi DFT' or 'Seatools '.

• Satellite A665 - error in the Recovery Media Creator

  Hello world

  I have a Satellite A665 and I tried to do a recovery with the Recovery Media Creator disc, but I got an error Code: 0E01B5-26 - 2A 030200
  Anyone has an idea about this problem!

  I created my two Toshibas recovery disks, but everything went well.
  In the past in this forum, several people have reported on similar error messages, but in the end we do not know why this is happening.

  What you can try is to start the recovery of HARD drive and when the operating system is preinstalled, try to re-create the recovery disc.
  Please use only on DVD-R media and also to purchase high quality like Verbatim or TDK media.

• Re: Satellite Pro L - error using the recovery media creator

  Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
  No idea what this means?.

  Thank you

  Hello

  Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.

  Also format the stick before using the recovery media creator.

• Re: RECOVERY MEDIA - gives Error Messages 10-FC12-0241 & F3-F200-0002

  TOSHIBA RECOVERY MEDIA DISK to adapt the system to factory State. The recovery media copied the files and in the end gave me this error. * 10-FC12-0241 * and ask me to click OK to exit. After I clicked on OK, the system rebooted and gave me the following error message * F3-F200-0002. *.
  When checked with the technical support, I was told it could be the hard drive problem. So I bought a new hard drive,
  * Seagate Momentus ST9750420AS 750 GB 7200 RPM 16 MB Cache 2.5 "SATA 3.0 Gb/s internal notebook Hard Drive *.
  and I tried the same process.
  Each time, he gave the same error messages.

  Any solution please.

  Kind regards
  Suresh Kumar

  Hello

  Eventually the recovery disk is damage or defective.
  Seems you must new disc order from here: https://backupmedia.toshiba.eu/landing.aspx

  Good luck

• Satellite L850 bad DVD size and recovery media creator error empty

  Hello
  I just bought my L850 Satellite today and I found that Windows Explorer reads a 4.7 GB blank as 1.3 GB, then creator of recovery media DVD return error code 0E01D0-3D-00000000.

  I'm afraid that my laptop DVD drive is broken! Are there any suggestions?

  Hello

  Don t think that your ODD drive is defective.
  Fact is that there is always a problem of compatibility between the discs and the ODD.
  As far as I know manual usage provides some info on well tested and compatible CD and DVD.

  Recommend using a disc that were the compatibility has been tested.
  In addition, I recommend standard R TDK. My experience has been good in using these discs

• Satellite L500D - recovery media creator failed with the error code

  * I raised the 'Toshiba Board"&"Recovery Media Creator' in my laptop L500D to create the backup drive this process uses 4 disc DVD *.
  * Disc 1 & 2 went OK but Disc 3 has failed, saying "code error" 020150-20-00000000 "*"
  * disc then she created 4 {Win/Recovery Environment} {64} * no problem do - what do I do now?
  where {fingers crossed} requiring the backup will drive for it work with just the 1, 2 & 4 drive?

  Alan has soon

  There are two possible problems:
  The CD/DVD drive laser lens is dirty and cannot properly manage any disk or disks are not entirely compatible.

  Recommend to clean the laser lens with a cotton ball and alcohol tip in most cases its pretty good for cleaning the lens
  Also, try to use other discs of different brands...

  TDK R or R Verbatim discs are good never had no problems using it

• Satellite A660-13 q - error when opening of recovery media creator

  My problem is that: when I try to open the TOSHIBA Recovery Media Creator application gives me the following error: 'UNABLE to get information of the disk controller' with options accept or Cancel when I agree, and then gives the following error--> "there was an unexpected error. on this application and then restart it. Error code: 0d00f6-49-00000001 "then accept following error"there was an unexpected error. on this application and then restart it. Error code: 0d 0172-49-00000001 "then accept, the application opens correctly.

  Please, I need a respond to errors, thanks.

  Hey,.

  > Then accept, the application opens correctly.
  And then you can create the successful Toshiba Recovery disk?

  If you create the recovery disk properly it of not so important to me because normally, you start the program once and you will not need more.

• NB250 - error creating recovery media

  New user. I hope that this is in the right forum.

  Trying to create up to USBMemory Stick using Recovery Media Creator. Says the USB key must be greater than 6.7 GB.
  I use a 8 GB USB Memory Stick but fails each time to the format stagewith various error messages and makes the memory stick unusable until reformatting.
  Ideas or suggestions appreciated.

  NB250 Netbook Windows 7 Starter running.

  Hi wrightp2,

  Usually a USB stick with 8 GB should be enough to create the recovery files correctly. I also used a 8 GB of CnMemory USB and it worked.

  Have you tried another USB key?
  I m not sure but maybe the USB stick isn't working properly and recovery media creator can so t finished. It's worth a try ;)

• Satellite L670 PSK3EE - recovery Recovery Media Creator ERRORS

  Hello

  I have a Satellite L670 PSK3EE-xxxxx

  When I run the Toshiba Recovery Media Creator application, I got two errors:
  Unxcepted error, close the application and restart:

  0D00F6-49-00000015
  0D 0172-49-00000015

  Then it displays the app and ask 3 DVD...
  No idea why?
  Where I download a new version of Toshiba Recovery Media Creator?

  Thank you in advance

  Creative recovery Toshiba claims 3 because three DVD empty DVD is needed to create a recovery disk!

  PS: I found Toshiba recover Media Creator download on this Australian Toshiba page:
  http://www.MyToshiba.com.au/support/computers/satellite/L670/psk3ea-055017/download?OS=25