Recovery of data after the Blue error screen?

Similar Questions

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Need help with the Blue error screen.

  I'm having problems with the Blue error screen at startup which said "less than or equal Driver_IRQL_not. He entered the State of memory dump & black screen after that.  Nothing was abnormal after checking all the drivers in windows 7 Edition Device Manager Home premium. I'm really lost as to what causes it? My computer is a toshiba satellite laptop computer P840 pourrait-someone ' a please advise me on this matter. Thanks in advance for your patience.

  Dear Zigzag3143,

  I finally managed to fix the problem by the chance. I had discovered that this problem was caused by the sypnatics of the laptop touchpad driver. Uninstalled A & reinstall it with the correct driver from the laptop manufacturer websites. Did not expect that it is the cause of all the problems. Thank you for your valuable advice.

• Computer laptop crash with the Blue error screen, locale ID: 4105, BCCode: 4A

  Original title: screen blue Usb_bugcode

  NEED HELP!

  Hello world. Could someone help me please! My phone hangs with the Blue error screen, and it does on a daily basis. I tried to find a solution online but nothing seems to work. Here are the details:

  I have a laptop with Windows 7 Edition Lenovo Home premium (Service pack 1). RAM: 4 GB. 64-bit OS. Intel Core i3-3217U CPU @ 1.80 Ghz

  And here's the problem:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 4105

  More information about the problem:

  BCCode: 4A

  BCP1: 0000000074EC2E09

  BCP2: 0000000000000001

  BCP3: 0000000000000000

  BCP4: FFFFF88002A84B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\043015-13057-01.dmp

  C:\Users\Jimmy\AppData\Local\Temp\WER-855899-0.SysData.XML

  Can you please put step by step directions? I'm not very good with computers, and it's really frustrating! I tried to remove and reinstall the usb drivers but that didn't do anything. I read the other threads on the similar error but couldn't find a solution. Thanks for your support!

  Could this be something to do with a monitor Samsung that I use?

  KD > lmvm sports

  start end module name

  fffff880 '075da000 fffff880' 075e2000 SPORTS (postponed)

  Image path: \? \C:\Windows\system32\Drivers\SSPORT.sys

  Image name: SSPORT.sys

  Timestamp: Fri Aug 12 00:07:32 2005 (42FBDA34)

  Sum: 0000D 894

  ImageSize: 00008000

  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  SSPORT.sys 32-bit Port claim Driver of Samsung Electronics

  Samsung ML-1430 series Samsung ML-1430 series USB001 unavailable

  You need to update or remove a SSPORT.sys. Zig - zag pointed out to you earlier. Please uninstall this printer and related software.

  Type device manager in the search above the Start button box and press ENTER. Find and right-click on the device and click on uninstall from the drop-down list. Restart your computer.

  Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Samsung, right-click and select Uninstall from the menu drop down. Restart your computer.

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• When I try to start my computer, the Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Original title: cannot start my computer

  When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Hi WindowsxpUser,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976

• Get the Blue error screen when entering Sleep Mode

  Original title: BSOD

  I get BSOD a few times of the day when my computer enters "sleep".  I guess it is driver related but is unable to identify the culprit. I use BlueScreenView and on some files .dmp lists as the "caused by driver" ntkrnlpa.exe on others, it lists tcpip.sys.  Can I download files .dmp full if someone can give me an idea on how to solve this problem?  Thanks in advance.  Vista by the way.

  Hello

  BSOD CAUSE tcpip.sys which is a component of Windows that means something else, he drove in error.
  The question is usually the network drivers used and/or antivirus/antispyware/security programs.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• You can save a broken computer? My computer does NOT start after the blue hp screen.

  In the past months, my computer has been the object of a freezing randomly, and Ctrl + Alt + Delete does not work. I stopped him via the power button. Sometimes, when I start it again, the computer moniter shows nothing but a black screen and the computer sounds different when it starts normally. When this happens, I turn it off again hit the left side of the desktop and turn on again. Whenever I do this, the computer starts normally, and I go on the computer use.

  Yesterday morning, after a break of 2 days, acess my computer and it is random freezing thing once again. I force close down as one normally do, and the computer does not start and displays the same black screen and the same fan/air weird sound. I stopped him and I hit the side RIGHT this time, I think and when I turn on the computer, the usual blue HP screen appears with the establishment, boot, diagnostics and system recovery things. HOWEVER, after this screen, a black screen will appear with this weird blue symbol on the upper left corner, I have never seen this and it looks like a circle with a triangle and a Pentagon below and it remains essentially on this screen forever. When I try to hit the establishment, boot, diagnostics and the shortcuts to system recovery, on the lower left side of the screen, it says "Menu boot loading...". ' or whatever the shortcut of loading represents, but nothing ever happens. When I press the other keys, this tapping noise comes from the computer at each tap of the keyboard.

  I have no idea what to do, and at this point, my first priority is to save important files on the computer. Does anyone know what is the problem? I want her more than a problem of system rather than a virus problem because refusing the boot black screen thing lasts for years. My computer is 3-4 years. I enclose a sketch of what looks like the weird symbol.

  

  MY COMPUTER WORKS NOW!

  With the flash drive, I was able to access the BIOS, which before, I couldn't.

  Eventually my computer was in some strange sort of lockdown setting, I switched it back to activate and now its work! I remember save important things in the future. Thank you very much for your help!

• Get the Blue error screen "DRIVER_IRQL_NOT_LESS_OR_EQUAL" frequently on windows XP Pro and Win 7

  Hello

  Our Office recently we are facing issue with as "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error blue screen frequently in most of the laptop,

  all the laptop with Win XP Pro-SP3 and Win 7 Professional.

  * It causes while he was working on several browsers or applications.

  * A few times everything by removing the Ac laptop adaptops, getting suddenly Bluscreen problem with the same error as "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  My troubleshooting:

  According to my Google search, I did the troubleshooting below:

  * In format and re-install with fresh people with Win XP and Win 7 Pro system.

  * Updated with the latest patches from Microsoft.

  * Updated all hardware drivers of Lenovo

  * We use Symantec Antivirus 11.0 client in all laptops, in this way, we had to also call with symantec and log the issue with them. but according to the confirmation of Symantec, it is not caused due to Version 11.0 Symantec

  * According to lenovo support, we have changed the physical memory RAM.

  After all troubleshooting done all too, we always get problem.

  Error message:

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: halmacpi.dll

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  Halmacpi.dll - address 0x834257a0 base at 83422000 DateStamp 0x4a5bbf07 0 x

  *****************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: SYMTDI. SYS

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  SYMTDI. SYS - address 0x8cf00023 base at 0x8ceef000 DateStamp 0x4ed7ca75
  ***********************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: igxpmp32.sys

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X100000D1 (0 X 00000002, 0 X 00000008, 0XB846D160, 0XB846D160)

  igxpmp32.sys - address 0xb846d160 base at 0xb8265000 DateStamp 0x4e85e92a

  *************************************************************************************************************

  Please give us the solution to get out of this edition

  Error logs:

  https://SkyDrive.live.com/redir?RESID=B7400F7AC914BDC7! 104 & authkey =! AHh7MiYoqEYxme0

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Upgrading RAM gives the Blue error screen.

  Original title: tried to grade until my memorey: 256 MB in the two slots to 2 1gigs RAM but keeps giving me a blue screen

  can anyone help im using a dell dimension de051 cpu 2'53 ghz intelceleron had 2 256 MB of ram installed ddr I tried up to grade 2 1 GB ram memory, I checked to ensure that it was compatible when I install 1 gig of his fine, but when I add the other happens with memory has changed that I want to go to boot options when I connect normally get help from the blue screen

  Well the upgrade: 256 MB to 2 GB will show a big improvement in overall

  applications. However, ram stick must be installed either with 1 or 2 faces

  chips on the module, mixing them creates incompatibility. If all have the same

  type, and then mix them up is fine, old and new, is not serious. However, the different

  sticks of size according to the Board of Directors (256 MB for slot 3 & 4, 1 GB for 1 & 2), some old maps

  requires it for optimal performance...

  If above is true, then install ram sticks 1 at a time, may be running microsoft ram Tester

  to see a problem. Reach: http://oca.microsoft.com/en/windiag.asp

• Help to remove the Blue error screen: 0x0000007e

  Original title; Blue screen - please help

  I'm playing a game recently on windows xp. I keep blue screening after that I tried to load the game. I discovered that what initially is that the user-mode driver framework is a failure. I don't know what it means anyway. my error code is 0x0000007e. Thank you

  Hi, BradMJ,

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  http://support.Microsoft.com/kb/330182

  The Windows User Mode Driver Framework (Wdfmgr.exe) service appears in the Windows Task Manager after you install Windows Media Player 10

  Note The Windows User Mode Driver Framework service is a driver component that is used by Windows Media Player 10. The Windows User Mode Driver Framework service supports synchronization of content with hardware players. For example, an MP3 device is a hardware player.

  http://support.Microsoft.com/kb/892552

  How to remove the Microsoft user-mode driver framework

  http://www.ehow.com/how_5175769_remove-Microsoft-usermode-driver-framework.html

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• Impression causes the Blue error screen will appear

  I use Office 2010 on a computer in Win 7 Home Premium 64-bit. When I send a document or spreadsheet, to my printer - not always, but ususaly - I get a blue screen. My printer is a HP Deskjet 1000 new.

  I tried uninstaling the printer completely and remove the Chuck and then put it back with the latest drivers and software HP, but who has not solved my problem.

  Any ideas on how to fix ths problem? I hesitate to buy an another pritner until I can identify and solve this problem. Any help would be most appreciated.

  Joe

  These accidents were caused by the corruption of memory (probably a driver).  Please run these tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  
  1 - Memtest.

  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org

  * Boot from the CD and let it run at least 5 or 6 passes.

  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.

  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  
  2. Driver Verifier

  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.

  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.

  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".

  * Restart the system and wait as he crashed to blue screen.

  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  'http://support.microsoft.com/kb/244617 '.

  Using Driver Verifier to identify issues with Windows drivers for users advanced

• Get the Blue error screen: "error of Page in the nonpaged area".

  Original title: Page fault

  I get a blue screen Page fault in non paged area... just above what it lists win32k.

  I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

  LJ

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/