Recovery of WAP54G - must .bin file in sync - or a .trx SEU command line method.

Any chance that someone has an answer to this?

I saw the same question and but never answered.

I can't find all the "brick recovery methods require .bin files but not the .trx file.»

What a great job if I get something like dd - wrt...

However, in order to restore to a linksys firmware using a tftp Send WAP, I need the .bin file to sync I well... which seem to no longer exists.

Quick, I found some old links that gave details on how to get it back (old linksys links) but the ftp server that hosted these files no longer exists.

Any suggestions on where to find the .bin files or a recovery method using the new trx files?

use the web interface, or replace the device is simply a lousy option.

/Shrug everything ive tried does not work.  (including a version 1.0 and version 3.1) Yes 2 different routers.

If it uses the bin files I can recover very well... including the warranty voind jtag method.

Simply not an image provide Linksys (cisco), the TRX files.

the Open source versions work fine...

While WAP is not dead.   I can't use an official /shrug 'image '.

What im reading there is a very very small differences in the .trx .bin files from...

Think im stuck using dd - wrt for now.

BAH - after a final test... rename the .trx file .bin for sync... Flash as usual.

wait 3-5 minutes

and then

the IP address for the wireless est.245.1 not as I used too... the old version is still bounced a.1...

So yes the .trx will work...


Thanks for the doublecheck... even when a person behaves like an A$ $

Tags: Linksys Routers

Similar Questions

  • Open a PDF file to a specific page of the command line

    I want to open a PDF stored locally to a specific page of the command line. I've seen examples of access files based on the web using http and the #page = parameter, but it doesn't seem to work for a file stored on my local disk.  I want to be able to use VBA in MS Access to control the opening page.

    Hi cfwoodbury,

    When you open a PDF document from a command shell, you can pass parameters to the command to open the switch /A with the following syntax:

    /A "=" ""

    For example:

    Acrobat.exe/a "zoom = 1000" "C:\example.pdf"

    Kind regards


  • How do you call the .mst file in the the Deployer to exception command line? (Acrobat Pro CC)

    To implement a conditioner creative cloud deployment of Acrobat Pro, I wanted to include the changes made by the Customization Wizard, as described here:

    When I deployed earlier versions of Acrobat, I simply added in Transforms = filename.mst to the command line so that the changes take effect. With creative cloud conditioner and Deployer of Exceptions command-line syntax, I'm not clear on how to call the .mst file during installation. Is it still possible?

    Currently, I use the following two commands:

    • exceptiondeployer.exe - workflow = install - mode = pre - installlanguage = en_US
    • MsiExec.exe /i Acrobat_x64.msi

    While normally I would add the syntax to turn to the second command, it does not seem right in this case that the transformation is a change of the MSI, which is part of the folder 'exceptions '.

    Hi sszczygiel,

    Please try this command instead of deployeur Exception

    "MSIEXEC /I TRANSFORMS = \AcroPro.msi"\AcroPro.mst "/ SB

    Please let us know if it helps.

    Kind regards


  • The file of the bar - descriptor.xml (and make the application of command line)

    I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

    BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

    The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

    Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

    What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

    Except that I did not count on bar - descriptor.xml to be so difficult to understand.

    I was brought to the documentation here:

    It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

    I start by trying the 'bar-descriptor configuration example file"on this page:



       Name of the author
       gXXXxXXx ##XxXxXxxxXxXX #xxx
       HelloWorld - splash.png


    Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

    Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

    Then I read on "Applications of Test using the command line":

    Now I run:

    BlackBerry - airpackager.bat - package installApp - blackberry-myappname - - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device

    Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

    What I get (in lib\adt.jar via the bat file):

    error 101: Namespace is missing
    Error: Validation of the AIR is not

    Okay, so the example did not straight on the box.

    Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:


            My App name





    I have no idea of what concerns the block whole call target, but it took, so he must be there.

    Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

    BlackBerry - airpackager.bat - package installApp - blackberry-myappname - - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device

    Yet once, I get:

    error 101: Namespace is missing
    Error: Validation of the AIR is not

    Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

    I'm left with this:

        My App name
        My App name





    Looks like the XML code that I use when I build for Android.

    First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

    Surely, this does not work:

    BlackBerry - airpackager.bat - package installApp - blackberry-myappname - - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device

    Success in building the package BAR to my infinite surprise!

    He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

    Perhaps because the required qnx tag was missing in the XML?
    Perhaps because images in the bg file could not be loaded?
    Perhaps because he had no permission to keep screen from dimming?

    I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

    So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

    (1) how am I supposed to write the bar - descriptor.xml?
    (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
    (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

    First of all, there are two xml files that you need.

    One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:
        My Fabulous Game
            [This value will be overwritten by Flash Builder in the output app.xml]

    Replace the text in red with your own stuff.

    The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:


    Make sure that you at least change the red dots.

  • Open a file from the command line


    I try to open a pdf file to a specific page from the command line on Windows 10.  I have referenced a few online sources (for example, the stack overflow), but could not find my mistake.  I enter:

    PS to C:\Program Files (x 86) \Adobe\Reader 10.0\Reader >.\AcroRd32.exe 'page = 50' \a "c:\test.pdf".

    When I do, the Player opens with an error message "there was an error opening this document. This file is not found", but clicking on the box OK dialog then opens the file (test.pdf is without a doubt), but the page = 50 command is ignored.

    Can anyone see my mistake?

    Thank you


    Memory, /A is not \A.

  • FF reads JPG files without. JPG ext as BIN files

    Why the IMG in the and other satellite service are read as BIN files? Is - Why FF compels me to SAVE their rather than show them (after application of picture) just like the Opera browser? Good God! MDE is jpg, then they must be binary. But the msg window informs me that "I chose to open a... file which is a BIN file...". "etc. I send the letter similar to FF Feedback a year without tangible result. Is there a setting 'secret' to change the behavior?

    Thank you very much, it works.

  • How to open data.bin file without using exe?

    I had downloaded a game on the internet its really big in size, I downloaded 2 GB of files and when decompressing, it would be gb(that's_what_the_installer_say).i 8-5 files there are 4 data1.bin, data2.bin and so on until data4.bin and one installer with it, but when I install with installer there is unpack to the slowly so I want to decompress without using the installer some alternative program to make it work. But when I try to open it with ultra iso or winrar it shows the error invalid or unknown format. What should do? Sorry for my bad English.

    A .bin file is a binary data file, you cannot unpack without the program who can read binary data.  You must continue to use the correct Installer.

  • How can I replace the mime types of server, always get the mp3, rar, sid, bin files directly in the dialog box "where do you want to save this file?"

    I used to be able to click on MP3 files, the way back when, and Firefox asks where I wanted to save. Nowadays, it opens a new tab with a flash drive.
    By clicking on the "unknown" files, like .sid, .prg, .zip, .rar is ' this is a BIN file. [Cancel] [Save] ». It does not give me a check box for "always do this".
    I would like that option to edit so that certain types of files, such as PDF, regardless of mimetype, always get opened in a new tab if you click. Also some types of files, based on the extension, always go directly to the dialog box "Where you want to save the file?", without worrying if there is a viewer or a builtin player or not. In my Firefox (41.0.1 14.04LTS 32-bit Ubuntu) I have never the choice "do this for these files always" more.
    Googling led me to delete my file mimeTypes.rdf and since file extensions can even "well known", such as .zip, are treated as BIN files and I get the box Cancel-or-Save for those too - again without the choice of "always save the BIN files.

    These files are send as Content-Type: application/octet-stream and Content-Disposition: attachment;
    To send files in this way, you cannot save an automatic action.
    You can see that in network monitor.

    Content-Disposition: attachment; filename="TURRICAN_AMIGA_PORT.sid";
    Content-Type: application/octet-stream
  • Unarchiver and StuffIt do not open the bin file

    I have the OS x 10.9.5 and installed Unarchiver or Stuffit to open bin files and they do not work. Can help you him?

    Thank you


    the .bin files are executable. There is nothing to check them.

  • Try to install the driver, get error "no program associated to open. BIN file"XP

    Trying to download and install a driver and a version update system for my Zoom H4n recorder, I get an error message that says something like "no program associated to open. BIN files. How can I fix this so I can manage my music. Thank you!

    This is how you do it .

  • a program has taken over my .bin files. How can I restore them

    a program (VLC media player) took over my .bin files, to be able to open them only with her, how to restore the .bin files to open the original windows program

    Hi rowdydave,

    Try these steps and check the result.
    Step 1: Associate a program
    see How to change or choose the program that starts when you double-click a file in Windows XP .
    b. try the steps in the article and check the result.

    Step 2: If the problem persists, uninstall VLC media player
    see How to change or remove a program in Windows XP .
    b. Once you have deleted the program, restart the computer and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • file associations for .bin files

    It seems that the *.bin files have been associated with a video player program. How do I tell - associate these files and how the *.bin files are used by windows and other programs?

    There is no standard definition for the *.bin files and no program specific to open. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Looking for a Firmware bin file?

    I was installing rockbox, and asked that the original file, firmware or something, like a bin file? Where can I find it?

    As I said, it's a different material. The downgrade would only take the courage of your v2 and replace them with the innards of a v1.

    I don't know Rockbox is working on it among their many other projects - which they are out of the goodness of their heart, geek, with little or no help from SanDisk, so you'll need to be patient.

    You can see how they're going to

  • Firmware is a BIN file?

    When I download the firmware, it is a BIN file.

    Is it supposed to be?

    How to open a BIN file?

    It's your router uses a firmware file.  You do not open at all.  Read your manual and there is a section on how to upgrade your firmware.  This is the file to be used.

  • Oracle SQL Developer 4.0.2 ( missing ututil in bin files

    I downloaded the Oracle SQL Developer 4.0.2 ( It comes with JDK... I can't find the files and ututi.bat in sqldeveloper/bin? Any ideas?...

    Hey, Jeff Smith. Thanks for the reply.

    It looks not like command line utility call unit tests was changed to 4.0.2 compared to 3.0.

    Can you please give me some reference documents I can to understand how to run utilities UTUTIL 4.0.2 version. ? Jeff Smith Sqldev Pm-Oracle

Maybe you are looking for