Recovery of Windows vista on the DVD.

Similar Questions

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

  I have two Acer Aspire laptops.  They are totally frozen because of the virus.
  I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
  I have to rebuild my laptop.

  Hello

  No - what are the two Acers come with a recovery disk?

  If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

  With an Acer, you press Alt + F10 at startup to start the recovery process.

  All data are lost when you do the above.

  And for the lost disc, contact Acer and ask them to send you recovery disks.

  They do that for a small fee:

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• Code product key? had reboot my computer and I need a code for Windows Vista from the bottom of my laptop

  Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.

  Can you help me?

  Thank you very much

  The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes.  If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.

  If you can't find the product key, your only choice is to contact the manufacturer and see if they can help.  Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs).  A valid product key is required for activation if activation is required - there is no way around this problem.  And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).

  I hope this helps and that the manufacturer can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System Recovery Options Windows Vista Home Basic x 32 help

  I have a gateway with Windows Vista Home Basic x 32.  Recently, it would break any chance and will have to be turned off manually.  Some options in the start screen and I would always click on start windows normally.  Today, I went through the process and came up with the blue screen of death.  He said that if this is the first time you see this reboot, so I did.  Then the blue screen of death came once again, and he said to go in the system recovery options.  Having no idea how to do that I restarted again.  Then the recommended option was to go into system recovery thing, so I said to myself Oh well it will fix itself.  I went in there and he brought me to the system recovery option screen.  It is said to find my operating system in a list and there is no operating system indicating.  Then I read and it says if you do not have an operating system, then load the drivers here.  I click on that and there is a list of about 50 cases.  Inside of some folders are folders more.  I can't possible go through all records to find driver software that he wants me to.  I also never had a disc of windows vista with the purchase of the computer

  I have a gateway with Windows Vista Home Basic x 32.  Recently, it would break any chance and will have to be turned off manually.  Some options in the start screen and I would always click on start windows normally.  Today, I went through the process and came up with the blue screen of death.  He said that if this is the first time you see this reboot, so I did.  Then the blue screen of death came once again, and he said to go in the system recovery options.  Having no idea how to do that I restarted again.  Then the recommended option was to go into system recovery thing, so I said to myself Oh well it will fix itself.  I went in there and he brought me to the system recovery option screen.  It is said to find my operating system in a list and there is no operating system indicating.  Then I read and it says if you do not have an operating system, then load the drivers here.  I click on that and there is a list of about 50 cases.  Inside of some folders are folders more.  I can't possible go through all records to find driver software that he wants me to.  I also never had a disc of windows vista with the purchase of the computer

  Hey EricLeonard

  link below has the various processes of recovery vista gateway described for you

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  what you want in the above link looks like this below

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  If you have problems with it contact gateway for support

  They provide their own process of recovery for vista

  http://support.gateway.com/support/SRT/allsysteminfo.aspx?cmpid=headerlink

  have a Happy New Year

  Walter, the time zone traveller

• Need to reinstall Vista, but the DvD player does not work

  Alright. That is the problem. I installed windows 7 on my laptop because a virus crashed my windows vista and the lost disk. After installing windows 7 my dvd player wouldn't even appear or open. As there is no power going to it. Before installing 7 worked well. I want to downgrade back to windows vista. I had an iso, mounted police and when installed would not let me because the car is not active or something. Went to disk management in the config of the admin and active player. That I reset. When starting it stops saying BOOTMGR is missing press ctrl alt del to restart. I don't know what else to do. Help, please.

  Here's how to clean install Vista:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  Cheers.

  Mick Murphy - Microsoft partner

• I'm trying to reinstall windows vista with the cd that hp sent me.

  I am trying to reinstall windows vista with the cd that hp sent me and he used to in stall, I had to have a new hard drive put in and I'm trying to put vista in and I can't help please

  If you have problems with the HP recovery disk, you will need to contact HP.

  This is HP Recovery Media, not Microsoft.

  HP Contact Info:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner