Recovery process stops error 1117 Satellite C650

Similar Questions

• Satellite C660 - recovery disk fails error 1117

  Please can someone help. I tried to use my recovery disks to restore my laptop when it kept not start correctly. The disks did not work so I bought a set of discs from Toshiba on this Web site. I still have the same problem.

  What the failed hard drive or something else?

  If I buy a new hard drive recovery disks will work if the hard drive is not exactly the same as the one that is out?

  Hello

  Have you thought about the HARD drive?
  It could be a malfunction of the HARD drive that does not allow you to install the system.

  I recommend that you check the HARD disk for some potential problems.

  There is a nice tool called Drive Fitness Test. You can use it to check the HARD drive.
  Google simply to get the software.

• Elements USB WD key stopped working in Satellite C650

  I used a Western Digital Elements USB Drive (250 gb) for about a year as a backup of my Satelleite C650. About three weeks when I plugged the drive started flashing market, then give a message that the disc is unreadable and inviting to format the drive. Viewer is not available.

  Where the cable was defective, I bought a new cable. No change.

  This WD Elements USB drive works fine in work computers and my computer at home so the problem is only on the laptop.

  (I do not know if the fault has coincided with either one) an update Bios Toshiba and/or b) acquisition of mobile braodband USB dongle for laptop only.

  Have you noticed similar problems with other USB devices?

• Satellite C650 - failed to create the recovery disk - error 020150-20-00000000 code

  I hope this is the right place to post this, but I think I have the same problem with my Satellite C650. He keeps wasting DVDs by stopping and saying that it cannot read the file E:\ZZlmg\11544XSP.swm and gives an error code 020150-20-00000000. The file is located on the DVD. I use Verbatim DVD - R The Recovery Media Creator is trying to write the first disc and is at the point of check data. Can you think of another explanation for this error other than the cheap DVD option? Thank you

  Hello

  There are two explanations;
  Either the CD/DVD drive firmware is not up to date and contains no information about the drives used discs (CD or DVD) is not fully compatible.
  As you know this is happening and is not uncommon.

  So first check if a firmware update is available for your CD/DVD drive.
  The European driver of Toshiba page is the right place to look for that.
  More details you will find in detail if the firmware has been published for your ODD.

  If there is no update firmware of your CD/DVD drive, then you should test other discs

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Satellite L850-ideogram - recovery stop error message

  Hello

  I have problem with my Satellite laptop. I can't recovery factory operating system.

  During recovery, it stops with 03-ffff-0001.
  What I have done:
  -run memtest - no error detected
  -updated the bios to the latest version
  -check smart hard drive and surface - no error detected (by victoria)
  -replace the hard drive with a good
  -Download the new recovery cd
  -change dvd - ROM

  Please hlp

  Satellite L850-CJK PSKDLR Win7HBx64

  In my opinion everything you tried has nothing to do with the recovery image installation, especially last two steps. I never heard that the recovery CD can be downloaded.

  Have you created a Toshiba recovery media s advice? If Yes, use please this media and try reinstalling the recovery image. On this forum, you can find several threads with similar problem and check what other people write about it.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• Need dvd recovery but Satellite C650-17N is too old

  Hello

  I'm a happy user of Toshiba labtop but I really have a problem with Windows 7 restorationon my Satellite C650-17N.
  Bougth will receive my computer, I had made my DVD revory but I did not test the recovery process.
  Today my hard drive crashed and I tried to start the process of recovery with the DVD but it blocks some time after the start.
  In dos mode, the system tried to copy "notify HTML" from the DVD, but the file does not exist.
  So I tried to download from the site Web of Toshiba Recovery, but it is impossible because my labtop model is old...

  Someone at - it a solution?

  Thank you

  Hello

  I have an old satellite C650 (it is said the site Web of Toshiba...) and I have a problem with the restoration of Windows 7. My hard drive crashed and when I put a new tried to restore Windows 7 with the recovery DVDs, but it did not work. At the beginning of installation of the copy of the directory is not the copy "notify html. This directory does not exist if I read the DVD on another computer. But during the trial of windows install to copy this folder and ask me to "insert the recovery DVD"... the installation cannot continue...
  Someone at - it the same problem?

  Thank you to
  (I tried to get the site Web of Toshiba Recovery files, but it says that my computer is too old...)

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Recovery process for Win 7 on Satellite Pro T110 is very fragile - WARNING

  I recently bought a Toshiba Satellite Pro T110 with Windows 7 Professional and was very surprised of the fragility of the system recovery process was:

  (1) there is no DVD media with recovery of Windows 7.
  (2) during the installation process, you MUST follow all the standard options (no additional partitions) If you want to be able to use the hard disk recovery partition every time.
  (3) third-party imaging solution to take a snapshot of the disk, using a partition is a pointless exercise - you will probably not be able to recover to a State where it can be used.

  Personally, I think that must be a big red piece of paper (or better yet, a set of recovery disks) in the box that says something like the following:

  If you want to be able to recover the factory default condition, you MUST follow this process:
  (1) installation using the standard options - DO NOT CREATE any WHAT of PARTITIONS ADDITIONAL
  (2) be prepared to wait hours for the system configuration process completed successfully
  (3) DO NOT connect to a network during this process connection
  (4) do not touch the keyboard or press the button unless recommended specifically to do
  (5) be prepared to go through many cycles of restarting the computer
  (6) once completed, the FIRST thing you should do is get a USB DVD drive and use the utility program to create a set of recovery disks.
  (7) create a system repair disc - it may be a CD

  In my installation, I created a partition of D (to allow for the backup image), then managed to lock the touchpad and then ended up with a totally dead machine after having tried a system recovery which came with error F3-F100-0004. Thanks to the help of Marcus to Toshiba, Brisbane I was able to get a set of recovery disks and get it operational.

  I hope this is helpful to someone else and that Toshiba can improve the reliability and stability of the recovery process.

  Hello

  If you would turn on the unit for the first time, then you will see that Windows 7 was already preinstalled and just s complete the installation process
  It will take time, however, after the win 7 installation you will find a pre-installed manual, most people don t read this and it is a big mistake
  Operating instructions, you can find all the details you mention here in the display

  > 1) there is no DVD media with recovery of Windows 7.
  There is an available HARD drive recovery option that allows you to retrieve the device without the recovery disk, but you can also create a clean recovery disc using the Toshiba recovery disc Creator called preinstalled tool!

  (> 2) During the installation process, you MUST follow all the standard options (no additional partitions) If you want to be able to use the hard disk recovery partition every time.
  As far as I know Win 7 preinstalled Toshiba is an image and does not change the partitions you can change this only if you are using the Microsoft Win 7 disc and it should be clear

  However, the recovery disk must be created ALWAYS that because there is always a risk that something would go wrong with a HARD drive or partition

  With reocvery disc, you are always on the right side

• Error bad pool on Satellite C650-152

  Hello

  I have a portable Satellite C650-152, recently bought 3 weeks ago. Have been suffering blue screen, a certain number of times (impossible to read why turns off quickly).
  Yesterday, I stop the laptop and a blue screen appeared "error Bad Pool then it started again."
  I don't have anything that is put on the laptop since acquiring outside MacAfee internet security suite 2011.
  Any suggestions please?

  Jeff

  Hi Jeff

  Try to start with this article http://ezinearticles.com/?How-to-Stop-Bad-Pool-Caller-Error-in-Windows-7&id=4240236 and the procedure of cleaning the registry.

  Please send comments.

• Problems of recovery on the Satellite C650-182

  I'm trying to fix a friends computer, it has formatted and deleted all the partitions on the hard drive and tried to install Windows 7 but still get the message that the installation can be done?

  The following is the error message when trying to install: "windows cannot be installed to this disk. This hardware of computers may not support booting to this disk. Make sure that the disk controller is enabled in the computer's BIOS menu.

  Then, he said the following: windows cannot be installed to this disk. "The disk may not soon."

  I know that the hard drive is fine!

  The complete model number is: Toshiba Satellite C650-182 part no: PSC08E-02J001EN

  Any help would be wonderful.

  Are you using the original Toshiba recovery DVD for the installation of the OS?
  Your friend has created this disk in the past?

  Before you begin installation of recovery BIOS default value.

• Satellite C650 - no option of factory on the recovery disk

  Hello

  My Satellite C650 caught a virus. I managed to start in safe mode and run AVG. Then stop it down, restarted and now says bootmgr missing. I ve used the recovery disc I made when buying, but it does not give me the possibility of Toshiba restore to factory State. I tried the option repair and everything I can think of.

  No idea what to try then as obviously I n t have a Windows 7 disc no matter what help would be most appreciated. Thank you.

  Hi debs2k,

  If you start from Toshiba Recovery disk what options you have exactly? Normally, you can restore the out of the box settings if you choose the Recovery Wizard.

  Generally all the Toshiba Recovery disk have the ability to restore the original settings, and I can t imagine that your drive doesn't have such an option. So please check again, I m that you have an option to restore the original settings. ;)