Recovery system has no work-says no BOOT MANAGER

Similar Questions

• I get an error message saying that the "Microsoft Network Inspection System" has stopped working and it is closed. What does that mean?

  Microsoft network inspection system has stopped working and closes. What this means, and is there a solution?

  original title: NIS has stopped working

  Hi Travispersons,

  You can read the following article and see if it helps.

  Install the latest Microsoft Security Essentials definition updates

  Hope this information is useful.

• I get a pop up saying that my dell security system has stopped working what I have to do to stop it

  from the windows of downloads last week I get two pop ups saying my dell security system does not work and then another said that they are looking for a solution but that my system shuts down.  What should I do to get rid of this

  You should ask your question in the forums of Dell support.
  http://en.community.dell.com/support-forums/desktop/default.aspx for desktops
  http://en.community.dell.com/support-forums/laptop/default.aspx for laptops.

• "The Windows Task Manager has stopped working" the INSTANT Task Manager opens... process of safe mode does nothing.

  I am running windows 7 64 bit and have encountered a problem. Whenever I have open tasks, any way Manager (msconfig, cntrl shift escape, Ctrl alt del, etc.), task manager opens and white and displays "Windows Task Manager has stopped working". I am increasingly frustrated with the problem. I tried booting in safe mode AND clean boot, but the problem persists. On top of that, the system restore fails whenever I'm trying to do.

  Could you please help me get running again the Task Manager?

  Do you feel the behavior if you log on with a different user account?

  Maybe, try to rename a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager to for example a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager.OLD in the registry. Then try to start the Task Manager again.

• setupccrt.exe has stopped working in Oracle Configuration Manager

  I installed Oracle 11 GR 2, that everything was fine, but at the end when he was cofiguring Oracle Configuration Manager. I got error folloing
  
  setupccr.exe has stopped working.
  
  I am unable to sort it out, but my database works very well and I started to work on 4 APEX with oracle. but I am still concerned about this error.
  
  If someone can tell me what I shuold do so that this problem can be solved.
  
  Thank you
  
  Concerning
  
  Mazahir Abbas

  Hello
  You want to use the configuration manager? If so, see according to document otherwise ignores the error.

  http://download.Oracle.com/docs/CD/E18041_01/index.htm

  Salman

• Problem with the printer driver. Get a spooler of saying error massage under system has stopped working.

  I installed the printer driver (HP Officejet pro K5400) to my machine and got the test print as well. but after that when I try to print, I get an error saying Spooler subsystem massage is stopped and was closed. What can I do for this. I tried to reinstall the software and start manually, but all failed.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Message by saying,"Network Inspection System has stopped working and the program was closed. »

  I backed up my pc, I've defragmented, I tried to create a restore point that was earlier with no luck. I love my Inspiron, but I am concerned about the speed and the freeze ups. This problem has stopped my Internet pages. Grrrr, DR PC?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the scan for viruses online on the computer and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• My recovery CD does not work, says bad Machine

  I have a recovery CD that I used throughout. I used this CD before, but now when I try to use it it gives me the error message bad camera. I took it for repair and after that hats when I started having this problem. Am suspecting that they installed windows XP operating system that is not for Toshiba machine. My model is the Satellite Pro 6100 series. Help, please.

  Hello

  The case is clear!
  The laptop has been repaired but the DMI was not updated by the service partner!
  DMI is stored on the system board and sometimes if the information string is empty or incorrect the recovery CD can be recognized as correct.

  The DMI string contains, among other things, the model number of the system.
  When you use the recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

  It seems that you have to contact service again for good luck DMI update guys

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Everytime I turn on my laptop, I get a warning that the Data Execution Prevention System has stopped working. Any ideas how to fix this, please?

  Running Windows Vista family - that's all as far as I know!

  Hi Norfolk broad,

  Remember to make changes?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  See the link below for more information on the execution prevention (DEP) data
  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

• Custody of "Dell support system has stopped working" poop upward and do not know how to correct the problem. I probably have 200 per day. Help...

  I need to know how to solve this problem. Thank you

  Hello

  You have a problem with the Dell supplied software.

  Contact Dell.

  http://support.Dell.com/

  Or you might ask the Dell Support Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Dell 1520 my son is running xp and has decided to stop the boot...

  the exact error message at startup after the DELL sign turns black is ' Windows didn't start because the following file is missing or damaged:

  \System32\hal.dll.

  How can I load a copy of this file on a disk and then start the computer with the disk in the drive and get it to the top and enough to do a restore of the system running.

  I do not have the system restore disk.

  It is extremely unlikely that there is anything wrong with the hal.dll file.

  Even if you want to replace it, you should know which of the 7 possible hal.dlls on the XP installation CD you need.

  I have never replaced a hal.dll file in my life for this problem.

  Interpret the message means that XP just cannot find the file either because the NTFS file system got corrupted (maybe from a power outage) or the c:\boot.ini file tell XP to search for the file in the right place.

  Answer these common questions:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  You can create a bootable XP Recovery CD of Console and always start with a chkdsk/r running on your system (which may be just what you need to do).  If that's not straighten out, we can use the same CD bootable to recreate your c:\boot.ini file.

  Here's how to start:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Alternatively, you could start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• SE error message: Windows/program has stopped working

  Hi... I thank u a lot for your answers
  I'm sorry to tell u I have not any use with your suggestions/answers
  I tried all the things u said but but problem is as usual. I waited these days here a lot to check all these problems
  I tried sfc/scannow , it has not detected errors, as I tried all the given u, but I had the same problems

  am problems getting its has stopped working
  ex:
  1. microsoft inspection system has stopped working and was closed
  2 drivers to windows setup has stopped working
  3 Explorer has stopped working
  like this ETC...

  Hello

  Method 1: I would say you can try the steps in the link and check if it solves the problem:

  http://support.Microsoft.com/kb/937093

  Method 2: You can also run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Windows Live Mail has stopped working

  Original title: Windows live mail

  Can anyone help me that my Windows Live Mail has stopped working. saying "Aproblem caused the program to stop working correctly. Windows will close the program and notify you if a solution available here. How to make it work again?

  Hello

  Method 1:

  As to what might be causing the problem, you can check in the event viewer. To open Event Viewer and to find out what information to look for, click on the links below.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 2:

  You can also check if all background programs is causing Windows live mail to stop working. To identify the program that is causing the issue configures your computer to clean boot. To configure the boot of the computer follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  If these solutions do not help, you can publish your application in the Windows Live community for assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.