recurring problem of missing page file

Similar Questions

• Problem with MSINFO32. EXE and Total/available vs Page file space virtual memory reported

  I am running Windows XP Professional SP3 with all installed updates, latest hardware drivers, etc.. It is a CLEAN installation on a material brand new, completed a week ago.
  The "/ PAE" switch is enabled in the boot.ini file.

  When I run MSINFO32. EXE, the summary of the system is the following:
  System model: System product name
  System type: X 86-based PC
  Processor: x 86 family 16 model 4 Stepping 3 Mhz-AuthenticAMD ~ 3515
  The version of the BIOS/Date: American Megatrends Inc. 1702, 22/12/2010
  SMBIOS Version: 2.5
  Windows directory: C:\WINDOWS
  System directory: C:\WINDOWS\system32
  Starting device: \Device\HarddiskVolume2
  Locale: United States
  Layer of HAL: Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Username: username MYUSERNAME01\My (redacted for privacy)
  Time zone: Pacific Daylight Time
  Total physical memory: 8 MB 192,00
  Available physical memory: 2.60 GB
  Total virtual memory: 2.00 GB
  Available virtual memory: 1.96 GB
  Page file space: 7.07 GB
  File: E:\pagefile.sys

  Right click on 'my computer' and selecting 'Properties' shows exact needs to be visible to a 32 bit OS... 3.24 GB of RAM. So, how MSINFO32. EXE is able to detect all of 8 GB is totally beyond me. But this isn't my problem.

  My BIG PROBLEM is the virtual memory. If I open the root of my drive E:\, it shows the swap file to size: 4 096 MB. And that's how it is in 'my computer' > 'Advanced' > 'Performance' > 'Advanced' > 'virtual memory' > 'change'.
  Custom size:
  -Initial size (MB): 4096
  -Maximum size (MB): 4096
  Total size of file for all readers:
  -Minimum authorized: 2 MB
  -Recommended: 4978 MB
  -Currently allocated: 4080 MB

  Why is-MSINFO32. EXE, statement my total virtual memory 2 GB and the size of pagefile 7.07 GB? Neither is correct! Can someone explain just what the heck happens here? My research on Google, many other people report the same total/available virtual memory amounts, with wildly different hardware configurations. I changed the size manually and rebooted several times, without result. I had the pagefile, sitting in a 5 GB partition, and then he moved on to another drive with plenty of space and assign "System managed". Divergence still existed.

  The material is as follows:
  [|] ASUS M4A88TD-V EVO/USB3 BIOS v1702 [|] AMD PhenomII x 4 (970 Black Edition) [|] Corsair CMZ8GX3M2A1600C8 (x 2) mode modules together ~ 800 Mhz & calendar 8-8-8-24 [|] Integrated graphics card Radeon HD 4250 with 128 MB + 512 MB memory [|] ASUS VE248H 24 "1080 p HD LED monitor [|] Drives from Maxtor 6V250F0 (x 4) 250 GB SATAII 1.5 Gbps [|] LG BD - DL Optical Drive WH10LS30 [|] Creative Labs X - Fi Platinum Sound Card [|] Logitech LX 700 keyboard/mouse wireless [|]

  I changed the speed / "timing" on the RAM to run ~ 666 Mhz @ 9-9-9-24, and the problem persists. As far as I know, he is not actually detrimental to the system; that is, it does not regularly, crash or anything. But the fact that MSINFO32. EXE cannot obtain such a right basis is VERY disturbing for me. There is no state what operating system says it is, then what fundamental problem may arise at some point in the future? Or is already there, hidden and wait a moment when the system load is high until it rears its ugly head and denounces all?
  I wonder if I should completely eliminate virtual memory? Or at least reduce the pagefile to 2 GB or close? After all, I can't imagine many running programs as long as 3.24 GB (RAM available for the operating system) is not sufficient to contain all this. I guess only he pourrait happen, however, is why I'm reluctant to totally renounce virtual memory.

  Anyway. Responses of all appreciated. Gimme a solutionand I will give my first-born. Or at least the neighbors...

  Hi VesanusTempestatum,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• I use a PC.  Problem: When you try to export my photo developed in the library, a message appears that says, "can't export, or offline or missing Source files."  How can I get my picture exported to my hard drive?

  I use a PC.  Problem: When you try to export my photo developed in the library, message box appears that says, 'impossible to export... '. Offline or missing source files. "How to fix this to export my photos on my hard drive?

  Lightroom is not in the expected location that he thinks that the photos are in the photos.

  This can happen because you have (perhaps accidentally) moved, renamed or deleted photos or folders containing them outside of Lightroom.

  The solution is to use your operating system to find the new location of the photos. Take note of where they are. Then in Lightroom, you can reconnect to them through these instructions: Adobe Lightroom - find folders and files moved or missing

  As an alternative, if the files were simply moved (and not renamed or deleted), you can use your operating system to move towards where Lightroom is expected to make them.

• Missing. PAG file (cannot connect to essbase error)

  Hello world
  
  I tried to open forms web planning but I get the error "unable to connect to Essbase" we have restarted the application and restarted the server. But my planning application is still unable to connect to the app essbase. I searched the forum for this issue and some suggested to ensure that the OTL, IND and PAG files are in place. I checked and discovered that PAG file is missing. We need just to restore the PAGE file, we have obtained from a backup or is there another procedure that we follow.
  
  Thanks in advance.

  You should be able to change the SSP administrator password, if you change the password, then Yes you need to update planning data sources for the connection of essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HP officejet Pro 8600 +: Missing page in the «HP Print for Chrome» software orientation option

  I can print OK in the format default portrait of a model of Toshiba Chromebook CB30-B-104 for a HP Officejet Pro 8600 + using "HP Print for Chrome" (installed from the app store for Google Chrome), but I can't find an option anywhere to change the page orientation. So if I print a document/image oriented in landscape format, it occupies only half a page of A4 portrait oriented superior. I tried to turn the image/document in the print dialog, but the rotation is ignored when printing is performed.

  Is this a "bug" or am I missing something?

  Updated February 10, 2016

  My original statement was misleading. I should have checked my facts more in detail.

  I cannot find an option called "Layout" to select "Wonderful landscape" or "Portrait" page orientation when you try to print the PDF files. When you try to print from other sources, the 'Layout' option seems OK.

  Hello @JBL11.

  Welcome to the Forums of HP's Support. I understand that you have a problem with the page orientation when printing with HP for Chrome print Chromebook. I would like to help,

  When I tried printing of Chrome app I had an orientation option. I pull a document and press Ctrl + P.

  Then I double checked that Print of Chrome was my printer destination. (I also use Google Cloud Print to the same printer).

  My options going to the bottom of the list are Destination, Pages, and page layout. Put in page gives me the ability to change from portrait to landscape.

  Have you tried to uninstall and reinstall the application?

  1. Click on the list of apps icon in the launcher at the bottom of the screen.
  2. Find your application in the list and right-click (click with two fingers on a Chromebook) its icon.
  3. Select Delete chrome.

  Gives it a try and let me know how it works.

  If this solves your problem please click on accepted Solution so that other people with the same problem can find the easiest answer. If you want to say thank you, it's always nice when someone clicks Kudos. If you have any other questions let me know.

• CS3 Error Msg: missing PDFMaker files...

  Hello

  I installed CS3 and when I tried to use Acrobat Pro I got the following error message:

  "Missing PDFMaker files.  You want to run in repair mode? »

  If I say 'yes' nothing happens.  If I say 'no' nothing happens.  What can I do to use my software?

  Thanks in advance for any ideas!

  Kathy

  According to Bill, you can print to PDF using the Adobe PDF printer. No "interactive" features with it. The content of the page that was just painted to the PDF document.

  Alternatively, with Office 2010, try the ability to save in PDF format.

  If you wish to use PDFMaker you more replace it to Acrobat X. 3.1.0 update.

  Acrobat X (3.1.0) PDFMaker supports 64-bit Office 2010.

  See: See: http://kb2.adobe.com/cps/333/333504.html

  n.b. Don't know, but it can be any problems with the integration of Acrobat X (as appropriate) with other CS3 applications.

  You do not want to ask about it in the CS forums.

  Be well...

  Post edited by: CtDave

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth

• My mozilla recently opened emails see the problem of loading pages and emails in the Inbox are not open and other email folders also not load

  recently I downloaded many video converter software. After that whenever I open my emails, I'm not able to load the pages. Only, he opens the Inbox and when I click on any mail in the Inbox, it opens the mail and immediately which automatically closes a few seconds and not be able to display messages. It displays also error message on top a second (e.g. loading problem) same error message appears when I try to open any other folder as spam, etc. in e-mail and project files does not open and only inbox is up but not able to open e-mail messages. Is the same with all the photo files or those things accessible through google search, never, it opens and opens like email, closes immediately. I tried deleting and reinstalling mozilla, but the problem still persists.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• I have a lot of activity of page file and page faults with 2.5 GB of RAM memory

  Hello

  I tried to find the reason for the slow performance on my pc and the limiting factor seems to be the activity of page file and errors of memory page. It is Win XP sp 3 with 2.5 GB of RAM and a processor 2.8 GHz (core). The task manager has never really shown a problem, memory use was rarely higher than 30%, around 10% page file use (I have the initial value, 3.5 GB 4 GB max) and CPU rarely hits 100%, but even when the task manager has revealed no particular problem the system shuts down sometimes for several seconds on starting the program or file to open. To follow the reason down I have installed a more detailed tracking software, which shows up to 1200 files page per second being transferred to or from the virtual memory and up to 8000 page errors per second during these breaks. This could be the cause, and if I can change all the settings to make more efficient memory management?

  Thank you

  My copy/paste standard when someone thinks PFs is / are part of their performance problem (but it's probably not...):

  I'm guessing that you see in the Task Manager and you have chosen to display the column of Page faults?

  If this is the case, given that the column of Page faults is not normally displayed if you activated, perhaps you are looking for some performance issue.

  A Page fault does not mean that there is a problem.

  A Page fault means generally that the application needs some data that are not in physical memory (RAM) at the time.  When the application needs some data that is not in the local memory and must recover from the paging file on the hard drive which is a way, you will see an error Page generated.

  Sounds kind of bad because it has the word 'Fault' in there, but it is really normal.  If you call your task manager after a reboot (do not use any browser), all applications are likely to have at least some page faults, even if you just restarted and "did not" do anything yet.

  Some applications may generate a few hundred or a few thousand Page Faults on a restart and then does not change.  The only thing in the task manager that will have zero Page faults is the system idle process, but this is a special case.

  Knowing what is a Page fault, you can understand that if your system does not have enough RAM for your operations, XP will need to move out to the pagefile often to get things he needs things there can be not in RAM when he needs.  Whenever she does this, you will have a Page fault.  The less RAM you have, more your applications will have hit the swap file to get their data, but you should be able to control some of this and you may even not notice "" the faults of Page at all--they happen all the time.

  So, one might think that if you turned off your pagefile and ran without a paging file, you would see zero Page faults in the Task Manager.  That sounds good, but this isn't the way things work.  XP works best when you have a system managed pagefile size (generally) the value if you probably won't work without a pagefile.

  You would always see Page errors in the Task Manager is because there are hard and soft Page faults Page faults, and you would see soft Page faults.

  A hard Page fault would be access to the disk paging file.  A soft Page fault would be just a shuffle or the reorganization of the things that are already in memory.  The Task Manager just them put everything in the column Page Fault and you can't make a difference.

  Given that the Task Manager offers two types of page faults in a single column you will need else with more granularity (such as performance monitor), tools that allow to separate Page faults in soft Page faults and performance monitoring of hard Page faults.    If you turn off your paging file and use Perfmon to split the Page faults on different types and follow them separately and have no pagefile, you see zero hard Page faults, but still see soft Page faults as a separate counter.

  I ran XP for a l-o-n-g time with only 256 MB of RAM and was quite satisfied with her for several years once I dialed things.

  Most your system and applications run, Page faults accumulate so that application until the application ends and restarted, then the Page counters error starts to the new and will keep goes upward, upward, toward the top and up - it does not mean necessarily you have a problem and PFs are not likely to be the cause of your performance problems.

  I do not think that you will see top-down but you can start them by restarting the application.

• Missing DLL file keeps Getting Past journal. How can I restore file?

  After trying in vain to my Dell Dimension 4550 under Windows XP SP3 with Dell Studio XPS running Windows7 HomePrem network, I downloaded a file recommended by Microsoft which would "solve" the problem. At the beginning I was unable to execute the file downloaded and kept receiving the message «you don't have permission to update Windows XP.» Please contact your system administrator. "Unfortunately, I am the administrator: o (...) After correcting the problem of 'permission', I tried once more to run the fix MS (WindowsXP-KB922120-v5 - x 86 - ENU.exe). The error message following, that I received was missing "Systems32\rundll32.exe". I tried to re - start the system with the disk OS (even changed the configuration of the system so that the CD player is the only boot drive. No go. Finally, the system charged up to the Welcome screen with my username (which is the ONLY user name and no password). When I clicked on the icon for my use, the office briefly appeared, then returns to the Welcome screen with my name of user/icon. The only other available command turns off the system.

  Since I have no way to load the missing/s file to the computer (or I'm not aware of the procedure), can someone please help me with this problem.

  Hello and welcome on Microsoft Answers. First of all, I think that your computer may be infected with malware. Rundll32 is a windows core system file required to run applications, but is not necessary for windows startup and so shouldn't stop your desktop computer to load.  I recommend that you restart your computer in safe mode with network. When you are prompted to choose an account to connect to choose your personal account. Download, update and perform a quick scan with Malwarebytes. Display the results of the analysis, and we'll go from there.

  How to start in safe mode

  Malwarebytes.org

  How to use Malwarebytes

• UM. Missing MSI file error

  original title: UM. MISSING MSI FILE

  Whenever my computer restarts and connects to the local network, it appears with the dialog that request lack um.msi Manager file upadate roxio regarding the installer of windows to set up the application. How can I get rid off the coast of this problem?

  Hi Mike,.

  The problem seems to be related with Roxio and you can follow the below section of the knowledge base cited for assistance.

  Update Manager (Service) issues and resolutions

  You can also contact Roxio for additional help.

  Roxio customer

• Missing DLL files. Windows Update does not work. Manufacturing installation of Xp home Sp3.

  I inherited my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I'm NOT have a disk to reinstall. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.

  I was told "running" sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.

  So... How can I reapir my Xp home without the disc?

  On Monday, December 6, 2010 20:55:18 + 0000, janiflower wrote:
   
  > I inherited from my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I don't have a disc of resettlement. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.
  >
  > I was told 'run' sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.
  >
  > Then... How can I reapir my Xp home without the disc?
   
   
   
  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.
   
  If you reinstall Windows properly, you are playing with fire.
   

  Ken Blake, Microsoft MVP

• Two hard drives - what to set the page file to?

  I have two hard drives, Windows is installed on C:, what should I set my page of the settings file for better performance? Hard drive space is not a problem, I have a 250 GB and a 1 TB drive, both are less than half full. I have 3.25 GB of RAM DDR2.

  I heard move the swap file on a second hard drive is beneficial, because the OS files and the page file could be consulted at the same time. Defining a very large page file or file page on both drives will hurt performance? What is a variable size compared to a matter of constant size?

  It shouldn't be noticeable performance difference if the swap file is bigger than "necessary".

  If your system can it take into account, it is considered generally to be a performance advantage to put the file on a different physical disk than the operating system is installed, provided the other player does not see many IO already.

  By using a constant size / fixed can eliminate fragmentation of the file page that can occur if it is sized dynamically.

  If you anticipate relying heavily on the swap file, maybe reconsider and add more RAM to the system, if possible, or upgrade to a 64-bit computer and the operating system that is able to handle more RAM.