Red screen of death

Similar Questions

• Blue screen of death WITHOUT Flash Player!

  When I try to watch video on YouTube I have Blue Screen Of Death. Sometimes after 1 min and sometimes after 10 min. I have installed Adobe Flash Player because it is not necessary to watch videos on YouTube. I checked disable "enable hardware acceleration and I always get BSOD.» I am running Windows 8.1 with all the updates, and also I've always updated Firefox when there is a new update. I tried to install Flash Player and tried all the solutions I found on the internet but non of them work so I uninstalled Flash Player. On Google Chrome, everything works normally, but I don't want to switch to him whenever I want to watch some videos in the fear of having BSOD. Please if anyone has a solution or an idea, it would be very useful. Thanks in advance!

  Hmm, since you have already disabled the main hardware acceleration, it could be a problem with the video (or audio) decoding. For video decoding, you can try these setting changes:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled to true to false

  (4) double click on the media.mediasource.mp4.enabled preference from true to false

  (5) double-click the preference media.mediasource.webm.enabled to false to true

  (6) double-click the preference media.windows - media - foundation.enabled from true to false

  The effect of everything that should be blocking MP4/h.264 decoding and place you in the latest format WebM (VP9) YouTube. You can check the result on this page, but that might not show up after leaving Firefox and start it again:

  https://www.YouTube.com/HTML5 (the two h.264 should be red)

  It's not so convenient for other video sites, but I'm curious to know if it helps on YouTube or has the same problems.

• Driver vista Power State failure Blue Screen of Death

  Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

  Hello

  Those showed all CAUSE as a Windows component that means something different it led into error.
  Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
  to analyze the other.

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I get the Blue Screen of Death on my computer.

  Original title: Blue Screen Of Death

  A brief description of your problem or your question under the title: I am faced with the BSOD

  Complementary in the body description The owner of this computer said that it does not have anything or noticed something that can cause the BSOD move every time the computer is turned on. It takes a minute or more for the computer down, it loads correctly and the office and each program can be used before it crashes.

  Error messages that are displayed.

  Is it repeatable? It always happens. I don't have to open or something to make it happen.

  Include a description of your system, it should include information that you can find using the basic tools ( Speccy & Belarc( )

  The operating system  Windows 7 Ultimate Service Pack 1 (build 7601) 32-bit

  The processor, orCPU 2.60 GHz Intel Pentium G620, 64 kilobyte primary memory cache, cache 512 KB secondary memory, 3072 KB tertiary memory cache, ready for 64-bit, multi-core (2 total), only not hyper-thread

  Thevideo card ?

  The amount of RAM memory 4.00 GB, 3.40 GB usable

  Other devices HID compatible con device
  Control del compatible con & HID device
  Entrada (x 3) USB device
  Teclado [Keyboard] HID device
  Compatible con mouse HID
  Concentrador raiz USB (x 2)
  Compuesto USB device
  USB storage device
  (X 2) Generic USB hub
  Volumen Generico Snapa
  

  If a particular software package is the question understand the developer and version number.

  Particularly important.  What Malware (Anti Virus) you are using and what version.  I don't know at the moment, I am currently in Mode safe.

  DMP and MSinfo32:

  http://1drv.Ms/1RsSWJw or

  https://onedrive.live.com/redir?RESID=70C323F259998CA5! 1962 & authkey =! ACBVNJzmO3eqehM & ithint = the file % 2czip

  The minidump file showed a KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e) stop error caused by the eamonm.sys:

  BUCKET_ID: 0x8E_eamonm+ 1487f

  ekrn.exe is the process that crashed.

  The eamonm.sys and the ekrn.exe are components of ESET NOD32 antivirus.

  As the eamonm.sys seems to be an older version try the NOD32 update to the latest version.

• Blue screen of death by practicing a new game.

  Hello

  I use windows 7 64-bit operating system.

  I just installed a game called "counter-strike: overall offensive". "." First of all, he played normally, but after an hour it says their where some files missing, I've fixed the game. When the repair has got 100% my computer immediately got a blue screen of death (first dump file). After I played the game again and it did not work normally. Suddenly, after a few hours, I got another blue screen of death (second dump file).

  So, I came across the forums hoping that I would get some answers.

  Sincere greetings,

  Tarik Atac

  Annex:

  This is the dump files.

  https://onedrive.live.com/redir?RESID=957D95FE262ED04! 115 & authkey =! ADZDM5hlqc1FDYs & ithint = file %2 c

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• Blue screen of death with BCCode: 116

  Hello

  Recently, I started receiving a lot of DBO. I usually get it after watching a video.

  Here are the details that I received on the subject.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 116

  BCP1: FFFFFA800CDFE010

  BCP2: FFFFF8800435B738

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Could someone give me some suggestions in how to solve the problem?

  Thank you

  Lisa

  Original title: blue screen of death

  for been link... duh!

  https://onedrive.live.com/redir?RESID=1B529A733D6D2EB3! 148 & authkey =! ALPyIEgs1AIRK5Q & ithint = % 2chtm

  Lisa

  Lisa

  No worries I do it all the time.

  These accidents are related to your video driver (yours is 2012) I remove it and install the driver on most recent available (at least 2014 if not most recent)

  

• BlackBerry Curve 8520 smartphones stuck on a 'white screen of death '.

  Hello world

  I have a Blackberry Curve 8520. Yesterday, he got stuck on a white screen, with a little black clock in the middle (the kind you see when you're waiting for a page to load in the browser).

  Even if I turn off my phone, take the battery or put it on charge, this "white screen of death" I read he is described by other people online, won't go away!

  If anyone can help, I would really appreciate it. Thank you.

  Ok.

  If your BlackBerry is turned off the power with a black or white screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Blue Screen of Death: Driver IRQL not less or equal (Windows 8)

  So my computer started to plant a month ago and gives a blue screen of death. It occurred about once a day, usually by playing games. Does anyone know what I can do to fix this?

  Here are my files dmp for the last two accidents.

  https://onedrive.live.com/redir?RESID=CFF15ADE8F05C8A2%21147

  PW

  Check enabled, but don't have not 'take' GIS behave pilot.  In all cases, this accident was related to nVidia Display Driver nvlddmkm.sys.  I remove the current driver and install the latest driver available.  Yours is about a year.  You need to re - install, even if the driver is on the same date that drivers become often corrupt

• blue screen of death with cold clone of the linux server

  We have an old Dell Poweredge 2550 running Red Hat 3 Server and we try to use the CD to boot more later/more cold clone to p2v it.

  It stops on the CD, and then after that it shows a loading progress bar get us a blue screen of death (bsod) with the following error

  STOP c000021a {fatal system error}

  The system process Session Manager initialization done in unexpected ways with the State of 0xc000026c.

  The system has been shut down

  It's hard to detect the controller raid PERC or something? We have since tried to use the stand-alone converter from PC software and point it to the Linux box to see if that process works a bit better, which seems to take too long.  I just want to know what happened in the case where the stand-alone converter process decides to vomit on his shoes.

  Thank you all,

  Brian

  Session manager errors are rare with PE - is the CD ok? -, it starts in a virtual machine?

  have you tried other CD of coldclone?

  This redhat machine has dark material?

  as low range or hi-end video cards

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Save the MacBook Pro - white screen of death

  My macbook pro starts, I get the ringtone to start and then the white screen of death that led to the computer to activate the walk and walk. I bring in my computer for repairs, but I am not able to save anything as none of the start up works. I can not access the disk utility, I tried! I wonder if anyone has experienced this or has any suggestions on what to do before going for repairs.

  What model of MacBook Pro?

  Maybe this problem

  MacBook Pro (15-inch, mid 2010) intermittent black screen or the loss of video quality program is over - Apple Support

  http://www.Apple.com/support/MacBookPro-videoissues/

  What happens if you connect an external monitor?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Blue Screen of Death... Urgent!

  Hey all. It's a little urgent, so any help is appreciated. So the story:

  It all started last Saturday in the fourth. I plugged my 5s 32 GB iPhone in car charger and it blue screened, what frightens me. I quickly unplugged and and soft restarted as soon as I saw him, and everything was fine.

  Since then, so three days later, I had to restart about 50 + times. So today I got sick of this blue screen, and I decided that I would try to fix it. I looked around solutions, and many say that it happens shortly after a solution when you remove the screen, but I've had my phone for four months and have never had to remove from the screen.

  The next solution was to restore factory default, so I decided to try it, after that I backed up in iTunes which is

  Finally, I was getting it restored, when all of a sudden, BAM. projected again blue.

  Since then, happened across this restore Middle blue screen of death, and it's practically a piece of metal shit now. I can't do anything. I can't force the restart it you a blue screen. Can someone give me advice? I have some upcoming vacation and need my phone. Can anyone help?

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you tested it on an Apple Store.

• Red screen

  I dropped my iPad 2. It is out of warranty. When I tried to turn it on it started with a red screen with a battery symbol. After a few seconds, he would cycle to a gray, then black screen, then repeat the loop. It would not keep pressed power button or combination home + power or being plugged into iTunes. I left it plugged and after a while the battery symbol has been replaced with the apple logo, but the screen is still red and the infinite loop going.

  I can't find something on this error on iPads and no image like that of my screen. I have a picture but you can't post it here.

  Any help would be appreciated.

  Hello.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

  If this does not help, it is best to make an appointment at the Apple store because it may be a hardware problem.

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• First white screen of death, now black screen on the internal, external screen works

  Hello

  a few months before I could not suddenly start my macbook more. He had the white screen of death and absolute no functionality in addition to its departure.

  A few days ago I got the macbook, open/close a couple of times so that it is operated and suddenly the keyboard LED lit and the screen

  turned black. I realized that he really started and connected to the external monitor. everything works fine now in addition to the internal display.

  I run Apple Hardware Test mode clamshell, but extensive testing even said that there is no material errors.

  can I conclude that my screen is not faulty? I thought it of the graphics chip, but wouldn't the AHT it detects then?

  Another thing to mention is that the battery should be changed (warning hint)

  I tried PRAM - & resetting the SMC without success.

  MacBookPro 13 "A1278 mid-2012.

  I would really appreciate any kind of advice.

  Thanks in advance

  Alex

  The symptoms you describe point to a faulty screen or display connection.  Make an appointment at an Apple store genius bar for a final assessment.  The event will be FREE.

  Ciao.