Red screen

Similar Questions

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Red screen of death

  iPad Mini 4

  
  

  Last night I plugged it in to charge and this morning the screen was frozen showing the Apple logo. I did a hard reset and thought that this would solve the problem. Unfortunately, shortly after the Apple logo, I got a red screen. The iPad is in an infinite loop and does not boot.

  I tried to restore the iPad via iTunes, but it didn't work. I entered DFU mode and tried not to restore once again, no luck at all.

  My last resort is the Apple Support. I'll take it to an Apple authorized service center and hope for the best.

  What frustrates me is that I have this iPad for 2 months and it was purchased new in an Apple Store. I'm really angry...

  

  AlemaoSlv

  I understand your frustration, however electronic devices can fail for various reasons. The unit is still under warranty, Apple should take care of your problem.

  This is a user to user support forum. If you wish you share your frustration with Apple, then use their comments here, http://www.apple.com/feedback page and click the box in the matter.

• Qosmio G10 - "noisy" red screen at boot

  I get a "noisy" red screen rather than on a black background while booting. During use, wallpaper is a mass of verticle blue lines.
  18 months ago, I had to replace the motherboard due to lines red verticle - cost of £400.

  Does a similar problem?

  Hmm seems not good boyfriend
  To me it sounds like a graphics card problem have you noticed the same thing on the external monitor?
  If Yes, then the graphics card might be faulty.

• SMP-N100 display only a red screen on startup

  At the start of my internet broadcast camera all I get is a red screen on my TV, no menu, nothing. I unplugged from its power source and restarted the same result. Someone has any suggestions, contacted Sony support virtually abandoned, suggestions here?

  Follow the steps below to solve the problem.

  1 turn off the player continuously and the TV.
  2. disconnect the cable/s streaming player and the TV. (What kind of cable do you use?)

  3 reconnect the cable/s after a few seconds.
  4. turn on the player continuously and the TV.

  If the problem persists, try connecting the player for an another video input of the TV. If still the same, try to use another cable.

  If my post answered your question, please mark it as "acceptable Solution".

• THE RED SCREEN ERROR

  I just bought an all in one HP Pavillion 20 I get a red error screen when you try to restore the system

  HP sent me the 6-disc after following all the instructions this RED SCREEN appears with the jargon of log file

  that I don't understand after a 1 hour on the line with support they tell me that I have to spend another $170,00 for a technician to come to my house? This cost me over $ 700.00 and a 2 weeks pay for me can anyone

  Help me???

  ~ Hi

  How long you have owned the machine?

  Checkurtech

• Receive error "Error of FBI!" with a red screen when you try to restore my HP back to Windows 7.

  What is an FBI error! __

  I tried to install / restore windows 7 Professional on my hp computer that came with win xp pro and win 7 pro. But I get this error message after windows copies the files and start the installation.

  The FBI mistake!
  Summary: Spawn program () fatal timeaction
  Info of the UIA. 945, FBI preos processing error.
  You must shut down the system and return to the command.

  with red screen...
  I tried 4 or 5 times without success... ill be and tired of this _ microsoft, time to switch to mac...

  Any help is appreciated.

  I solved the problem!

  I think that the provided HP recovery partition is small to restore windows 7 and office 2007 (as it is predicted for xp)

  When installing with the restore cd, she lays on the partition that you want to, you can select 1 partition, or score 2 or 3 etc... selected .i 2 partition with 50% of space in each partition and continues the restoration, which has solved the error of the fbi. I installed since January 2010 as it much win 7 hp pcs downgraded win xp (preinstalled). HP have not corrected the problem and yet!

• Red screen + with driver_irql_not_less_or_equal blue screen

  Hello

  From may, I get crashes on my computer. The first significant accident was when I was playing a game of Warframe where I got a red screen in which nothing is present in addition to the entire screen being red and my computer restarts automatically. I thought it was a face game question so I reinstalled the game and have not so far received a red screen. I received two red screens and between the two red screens, I got a blue screen (I never got before).

  After I reinstalled the game, I had no crashes, pilot at all, not red or blue screens screens. After two weeks, I get another blue screen with error driver_irql_not_less_or_equal. I have not changed a lot on my computer in the past months, so I don't know why it happens.

  What can I do to fix this error? If any other information is needed, I'll do my best to provide.

  Thank you

  Corey Chen

  Hi Corey,.

  Results verified by WinDBG. DumpCHK and BlueScreenView.

  The Bug_Check were USBXHCI CAUSE D1. SYS which is the driver of USB 3.0 and a game controller
  Windows which means something other than the conduit in error.

  BugCheck D1, {18, 2, 0, fffff8800683e73e}

  Probably caused by: USBXHCI. SYS (USBXHCI! TransferRing_StagingDataFind + 36)

  Very often, it is a combination of software and hardware even that creates instability in the system
  and that's the case here.

  1. check with ASRock Support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset of low-level driversand on-board major
  and drivers of different devices (see previous message above for driver update methods). Do not forget
  to search for the updated drivers for all USB devices.

  BiosVersion = P1.00
  BiosReleaseDate = 17/10/2012<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset ="" and="" the="">
  device embedded and separate drivers.
  BaseBoardManufacturer = ASRock
  BaseBoardProduct = 970 Extreme3 R2.0

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  2 check any USB 3.0 device you installed. Remove to see if the problem persists and
  Try them in ports USB 2.0 as a test. Check with the support of their Creator for known problems.

  3 use ALL other methods in the previously posted answer above.

  4. AFTER all the above (especially updates BIOS, chipset and driver) if the problem persists
  Run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier methods during the previous
  answer above - updates and other methods it is first, or it will find that the same
  info).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to fix a red screen before starting logon

  I have a red screen when I connect. My laptop is sony vaio fw330j. Help, please.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  Please answer the following questions for a better understanding of the issue:

  (1) to when was the last time he managed to boot up to the desktop?

  (2) what were the changes made to the system before this problem?

  I recommend to disconnect all external devices except the keyboard and mouse if you use it and then perform an automatic repair from the installation media.

  Steps to perform an automatic repair from the Installation DVD:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  You can also go through the steps in the article:

  See the link: http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode

  If the problem persists, you can contact the manufacturer of the laptop.

  Refer to the link; http://eSupport.Sony.com/us/p/index.pl

  Hope it solves the problem, if you have questions about Windows, feel free to post.

  Thank you and best regards,

• I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  Download means to transfer data from the internet to the computer.

  If you double-click the file missing in the assets of the project, it will open a window saying where is so and so file.

  Navigate to the file and click OK.

  The rest of the files could follow, perhaps brought to them all separately.

• When I import videos, they appear as a red screen ss14

  I use a PC with Premiere elements 14. I am trying to edit videos but when I import the files (.mp4 or .mov files) all I get is a red screen. The audio works fine. This has only started to happen a few days ago. How can I solve this problem?

  Dain

  If you are running 64-bit Windows 10, install QuickTime 7.7.6. It is not the last version, but meets the criterion of Premiere Elements for QuickTime 7. Apple has a problem with QuickTime 7.7.8 (latest version) and 10 64-bit Windows.

  https://support.Apple.com/kb/DL1822?viewlocale=en_US&locale=en_US

  What is the brand/model/parameters of the camera that records what is present in Premiere Elements as red images? When you say that this is happening with all the videos that have been tried, does that mean that these .mp4 and .mov files. If you import images fixed jpeg, how they present?

  My main goal is the integrity of the installation of QuickTime, coupled with these files .mp4 and .mov with red poster (video compression in particular) properties.

  You mention Intel HD Graphics 520 as your video graphics card. The version of the driver has been updated recently? If so and the version of the driver is updated, then Explorer roll back the driver. If the name of the card is not a misprint, please turn off the preference "Use hardware acceleration (works on Intel HD Graphics 2000 and newer)" found Edit Menu/preferences/general.

  Please consider. Questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Red screen in first/encoder MXF files

  Hello

  I converted a bunch of MXF (C300) images in Adobe Media Encoder. All fine convert except files including audio 10 is correct, but the video is replaced by a RED SCREEN throughout the entire clip. Here are a few screenshots:

  

  I can open these original MXF files in VLC Media Player and they play perfectly. However, bringing these specific clips in the SOUL or first creates the same problem red screen.

  I looked all over the internet for an answer and found nothing. Is it possible to convert these files and import them into first correctly?

  Any any help would be greatly appreciated!

  Hey Kevin,

  Thanks for responding. I copied the overall structure of the file of the c300 images on my hard drive, and then dropped in the individual mxf files in the SOUL. So, it looks that I don't import correctly.

  Is the same thing as Media Browser - Media Encoder?

  Thanks again for your help!

• Do not import correctly C300 images, video playback in first is frozen or just a red screen

  After working with C300 sequences for about 6 months now, it's the first time I encountered this problem, and I did not something differently with this project to my knowledge.

  I work with a few sequences C300 (not much, not even a full 32 GB card) and when I bring it in first part, but not all, the clips are not able to read the. In some cases, the video freezes on a frame, while the sound continues to play, in other cases I'll just take a red box during audio playback. In all cases, audio playback is fine, no problem.

  The problem only occurs on more, interview clips. I did have problems with clips less than about 1-2 minutes in length. When I get the screen frozen or red, it will remain frozen or red for a while, more than a minute or two minutes, before the video comes back to the end of the clip. It is quite inconsistent if, I have not noticed a pattern.

  Regardless of whether or not the film is rendered, problem remains the same. Or there is a problem with playing late, if I stop the clip when the red screen comes up and wait never struggling upward, don't thaw never. I tried to import the images in several ways: by dragging in the project of the Finder. navigate through the first media browser; clicking file > import. Same question every time for the same clips.

  If I try to export the clip, the same question. If I try to align the images directly from the Finder on Media Encoder to output a version ProRes422, same question.

  However, if I take the structure of the card and copy it onto a CF card and it pop in my C300, it reads very well. No red images, do not freeze, no problems. This isn't a corrupt card and it's not like I lost all the data in the copy of the card to the computer.

  I work with first CC 2014 on a 2012 Macbook Pro (i7 clocked at 2.6 ghz, 16 GB RAM, 2 GB of VRAM), I tried to use OpenCL, CUDA and software only as the renderer, same problem with everything. I also tried several computers with the same question.

  Any help would be appreciated!

  Sam

  Thank you all for your answers; they led me in the right direction and I managed to find a workaround. In response to the various questions and comments:

  Jude, thank you for your suggestion. I was able to open images in VLC and it played very well so that licences to confirm that he has not been corrupted.

  Robert, I spin 10.9.5 as well, but this is the first time I had no problem with C300 images in any program.

  Kevin, Yes, I'm ingested through the media browser. As I mentioned in the first post, I tried, as well as slip and fall and file > import, which gave me the same result. It is a CC 2014 20141 update project, and it was even a version before the initial release of 2014. I did not rename individual media files, but see below for my work around.

  So, my solution:

  1. I copied the map and structure files on a map see As I mentioned in my first post, I have done this and can read the images very well if I popped the card into my C300.
  2. Open map in the Canon XF Utility. Here the images read very well as well.
  3. Select the relevant clips and choose Edition > export to MXF format...
  4. Then, when I imported the new files MXF (via the media browser) sophomore, clips to read very well. I have not seen any glitching, freezing, red images, etc.

• video shows as red screen

  I thought this would be a great idea to make films of memory for my grandchildren.  I bought the two first Elements 8 and Photoshop.

  In the Organizer, but not in the first video work. (Audio works in first)  I read many pages info that I don't understand, but when I try to upload the photo and video in first, I get the message that miss me something called a CODEC. (Still images charge - just problem with video). Yet once, I researched as much as I could to try to understand this, but nothing helped.

  My videos are all taken with a Sony DSC - T90 digital camera.  It uses MPEG4 (format of? don't know how it's called).  The box of Adobe says it is compatible with MP4.  I have 7 of QuickTime which says he has the CODEC MPEG4.  I have Windows Media Player version 11.0.6002.18111 and says he's got MP4.

  My Dell computer has Intel R (TM) 2 Duo CPU T9300 @ 2.50 GHz.

  Version 4 GB RAM video card ATI Mobility Radeon HD3650 (updated), 8.477.0 Audio IDT High Definition Audio CODEC

  ST9200420ASG partition MBR 1 MB free hard drives version 6.0.6002.18005 driver date 21/06/2006

  I have Vista Home Premium 32-bit.

  I hope someone can give me simple, easy to follow instructions on how to get my video to work in first Elements 8.  (I upgraded from 6 first that came with my computer - had played around with it a bit and thought I couldn't understand how to use first 8 but, as mentioned above, can not get the video to show anything except a red screen.)  I uninstalled first 6 where there was some kind of conflict.)

  Thanks to all who can help "lower my blood pressure.

  Barbara

  Video from cameras almost always must be converted before it can be used in Premiere Elements, by the frequently asked questions to the right of this forum.

  http://forums.Adobe.com/thread/415317?TSTART=0

  Your camera takes snapshots in MP4 format. The best tools to convert it to DV - AVI are great (which is free) and Quicktime Pro (great value for $29 from Apple.com).

• Custom titles doesn't work, red screen media missing!

  Each unique custom title, I try to use that I carefully placed in the user > movies > animation models > way to titles eventually appear in fcpx, but when I drag him to the timeline I get the screen red exclamation point. Which I think represents lack of media. It doesn't matter what I put in these files. For reference, I'm using FCP X 10.1.3

  I've also attached a few screenshots for reference.

  

  Update FCP X. 3D titles require at least 10.2.