Similar Questions

• Network with vSphere 5.5 and Windows 2012 problems

  Hello

  A few weeks ago, I have updated a server to a client of 4.0 to version 5.5. There was a mistake in any way, but that's another topic...

  Did the update because we run a machine Win2012 on this subject.
  Soon, I recognized that I have trouble, access to the machine, freshly installed by RDP. Some times it works, but mostly it doesn't. It simply expires. All the other virtual machines on the host (Win2008) seem to work very well (haven't heard anything else among users).

  From another VM on the same host, I started to ping the machine of W2012:

  Ping as 172.30.50.135 ausgeführt wird mit 32 bytes of data:

  Antwort von 172.30.50.135: bytes = 32 time < 1 ms TTL = 128

  Zeituberschreitung der Anforderung.

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Huh? A ping with TTL 128, it has expired, then all the wider with TTL 254, cannot access the machine...

  After about three minutes the TTL to 128 jumps and I am able to access the machine again.

  If I disconnect and wait a few minutes, the same thing happens again... Very strange...

  Have not tried to use an adapter E1000 instead of vmxnet3 yet, but here to warn that if possible.

  Any ideas I could try?

  Thank you
  URS

  Oh... Shame on me... What a rookie mistake... Ha ha ha...

  Well... There was a point of access that are configured with the same IP address * facepalm *. I probably did it on the first installation and always used the same wrong IP address on and on. (Don't tell my colleagues!)

• Problem installing VMWare Workstation on a Server Windows 2012

  Hello

  I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.

  The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.

  Is there any fixes for this issue?

  I enclose three screenshots for you pleasure.

  Regards, Ray...

  Hello Ray,

  Welcome to the VMware community forums.

  You run an EC2 instance that has just 615 MB memory installed?

  It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.

  I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.

  You can easily check that yourself by running the script from this site:

  How Hyper-V to: detect if you are inside a virtual machine

  If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.

  You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.

  As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.

  Hope this helps,

  --

  Wil

• Problems with the installation of Windows 2012

  Hello

  I suck with creating a virtual machine as a server windows 2012.

  on the creation of the vm I then run the installation since the data store disc. When I selected the language and then clicked on install I always get a screen around "media not found driver...". ».

  I can't get around that, any ideas on how to fix?

  Hi again jmwebster,

  We had a number of previous reports of the non-Microsoft browsers forum repeatedly truncating the download of the installation of Windows 8 media.  If you still don't have success with your most recent upload and you are not already using Internet Explorer, it may be worth your while to use IE for this download Windows Server 2012.  I have not passed through the procedure myself, but apparently if you use IE you should be given the possibility to use a download manager to manage the download and verify its integrity and passing by that the procedure seems to have led to more positive responses from users of the forum who have problems before and had tried to download several times.

  Good luck with it!

  --

  Darius

• All printers disappear from windows 2012 r2 print management

  We used the print management in Windows 2012 r2 to deploy and manage printers, printers Nowdays, we do not see in print management. I read that the KB3170455 caused this problem but this patch it is important for the Security server. I think that the solution is to quickly remove this patch. Is there a solution for this problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• "Bcdedit-set {default} displayboot menu" does not-server windows 2012 R2

  Microsoft support cherish,

  I have windows server 2012 R2 running the Dell server 'PowerEdge R210 II', today found that the server suddenly unable to windows for lunch and when I tried to lunch the server it asks me to insert the CD of windows media and after that it stops popping to insert the support CD, and now it shows me an error "can not find script file c:\remindpopup2.vbs.

  I tried to access the windows safe mode and given that it is windows 2012 and after some googling, I realized that I need to activate the command line start menu since I can't access the windows.

  I insert the windows CD and using the option 'fix my PC' I managed to gain access to the command line so I tried to use the following command to activate the start menu

  bcdedit/set {bootmgr} displaybootmenu Yes

  but the operation did not succeed with the error below

  the boot configuration data store could not be opened.

  the volume of the file has changed on the outside so that the opened file is no longer valid.

  With kindness your advise how to solve this problem and please let me know if no need more details.

  Kind regards...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot DRC windows 2012 via wifi

  Hello

  I have problems connecting DRC to windows 2012 via wifi.

  My windows 2012 is set up in my network using cable and hub, while my laptop is also on the network connected via wifi. DNS and internet work fine, but every time I tried to connect to windows in 2012 using wireless (DRC or domain join) do not work.

  I tried to use cables and it works beautifully... seems that windows 2012 do not accept the connection of clients connected wireless...

  Help...

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Corrupt Windows 2012 R2 Administrator profile

  Hi all

  I logged on my current server to run Windows 2012 r2 level one day and a new profile of the administrator is created.

  C:\Users\Administrator\Desktop, I see clearly my original files, but the current Administrator profile is directed to C:\Windows\System32\config\systemprofile\Desktop

  I tried:

  (1) deletion and recreation of the account administrator profile using another account has administrator (System Settings Advanced-> advanced-> user profile tab) rights.

  (2) to make scanning of virus/malware

  (3) Regedit to change the value or values of ProfileList (https://support.microsoft.com/kb/947215?wa=wsignin1.0)

  Nothing can make me "point back" to the original Administrator profile I want to have. Whenever I log into admin account, it just go directly to C:\Windows\System32\config\systemprofile to load the profile.

  The main problem is that I can't use desktop connection remote, which is crucial for my operations. The error dialog box pops up just indicating that Remote Desktop cannot be connected. I did a check and my ddns account works fine.

  Please do not asked to re - format or system restore. I had reasons not to do so.

  Anyone?  Help...

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows 2012, WMIPRVSE. EXE WMI service loses memory

  Hi all

  In my Windows 2012 9200 server, I installed the provider of LSI and I execute associateur queries to the LSI provider that interacts more with the WMI service that acts as a CIM Object Manager (CIMOM). When I run these queries, I see the memory use huge increase the WMIPRVSE. EXE service.

  I was looking through some articles and got to know that it is a known problem. But Microsoft did not apply this question to the Server Windows 2012. Here are my conclusions,

  Use of the maximum memory by the particular host: 536870912 Bytes.After which it would break and a new wmiprvse.exe would come to the top. I do not change this limit of memory because it is not the procedure to solve this problem.

  Can anyone who has had this problem, could guide me?

  Thanks in advance.

  Kind regards

  Ravi

  Hello

  Transfer your question in the Windows Server Forum.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winservergen

• Windows 2012 Server RC iso download link is broken.

  8400.0.WINMAIN_WIN8RC.120518 - 1423_X64FRE_SERVER_EN-US-HRC_SSS_X64FRE_EN-US_DV5. ISO broke the windows Download Center

  Hi iso Windows 2012 Server RC is broken (8400.0.WINMAIN_WIN8RC.120518 - 1423_X64FRE_SERVER_EN-US-HRC_SSS_X64FRE_EN-US_DV5. ISO) where should I report it? Download Manager java file of the vassal States is broken. Downloaded 3 times but same problem

  I just tried to download the image using Windows 7 and Internet Explorer 9 and have downloaded correctly.

  In the future, please post on the forum of the Installation of Windows Server 2012 Release Candidate RC .

• Cannot install windows 2012 on PER720xd

  Dear all:

  I can't install windows 2012 R720 xd, because the controller of lifecycle Watch not deploy 2012 on the list of the OS from windows even if I update worm 1.1.8.1. And I try to install windows 2012 directly, but it can not detect it's installation cd. I tested the cd that allows you to start on vmware with success, how can I do?

  Hi Vivek, this problem is solved after I change for external start DVD rom from before backward USB, it can start the OpenManage DVD. This isn't making sense, but it works, thanks for your help!

• How to uninstall essentials windows 2012 my Windows 7

  A few days ago I installed windows 2012 essentials, but it did not work. When I tried to re - install a massage appeared "you have last installed program." I opened uninstaller to uninstall the program but I do not see windows essential here. How to solve the problem?

  Try to do a system restore before you install:

  http://notebooks.com/2011/05/12/how-to-do-a-system-restore-in-Windows-7-or-Windows-Vista/

• my windows media player have no sound windows 8, windows @2012 edition microsoft media player. ink

  my windows media player have no sound windows 8, windows @2012 edition microsoft media player. ink

  HI Maria,
   
  
  Welcome to the Microsoft Community and thank you for giving us the opportunity to help you on this question.
   
  
  According to the description of the query, you have trouble with Windows Media Player the
  computer.
  I would be grateful if you could add a few details about this:
   
  
  (1) is specific to Windows Media Player on the computer sound question?
  (2) are you having this problem while playing any file specific media on Windows Media player?
  (3) don't you make changes to the computer before this problem?
   
   
  Please answer us with more information to resolve this issue.
   
   
   
  Do not hesitate to let us know if you have more questions about Windows Media player and we would be more than happy to help you.

• Agent Oracle 12 c deployment Windows 2012 R2 (x 64) fails with exit Code: 127

  EM 12 c Cloud control fails to add target Windows 2012 R2 host

  Description of the problem

  ---------------------------------------------------

  OEM12c box:

  Oracle Linux 5; EE database Oracle 11.2.0.3, OEM Cloud control 12 c - 12.1.0.3 + the last plug-ins

  Target area:

  Windows Server 2012 R2 Standard; Oracle 12.1.0.1 EE database

  Try to add the target host of Windows in the cloud of control and the prerequisites checks fail and cannot continue the deployment.

  OEM12c > Setup > add target > add target manually > add target host > Add Host

  Hosting platform

  mcsdbora2. ESRI.com Microsoft Windows x 64 (64-bit)

  Error

  Executing the command c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/oui/bin/setup.exe - prereqchecker-silent - ignoreSysPrereqs - waitForCompletion - c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereqlogs prereqlogloc - PREREQ_CONFIG_LOCATION=c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/prereqs-J DORACLE_HOSTNAME = mcsdbora2.esri.com - DAGENT_PORT = 3872 - DALLOW_IPADDRESS = true on the host mcsdbora2.esri.com Failed oracle.sysman.top.agent_Complete entry point

  Cause: "Error Message: not available Exit Code: 127.

  The SGD log location:

  mcsoracloud.ESRI.com:/u01/app/Oracle/gc_inst/em/EMGC_OMS1/SYSMAN/agentpush//2014-03-21_10-25-47-AM/applogs/mcsdbora2.ESRI.com_deploy.log

  Target area: C:\oracloud\ADATMP_2014-03-21_09-19-19-AM\prereqlogs is empty.

  MOSC: My Oracle Support community

  EM 12.1.0.3 agent for Windows 2008 server x 64 bit installation fails

  "This is related to the issue being reported in note: 1631508.1 ' EM 12 c: Agent push the target MS Enterprise Manager 12 c Cloud control Windows host fails remote verification of prerequisites.

  "The version of cygwin has been recently updated on cygwin website.  This caused bugs: 18250066, which means that it is not possible currently to deploy an agent on windows if you are using the latest version of cygwin. »

  "Workaround in the meantime would be to do a silent install of the agent or install an older version of cygwin"

• Windows 2012 stuck on reboot

  We run vSphere 5.5 U2, and we have a few Windows 2012 SMV and some 2012 R2 virtual machines.

  
  It seems that when a reboot is initiated from an RDP session on virtual machines 2012 (not R2), they usually get stuck when rebooting on Windows screen with a circle of rotation. The only way to solve it is to reset the virtual machine.

  In my tests, this happens if you try to restart the console (VM > power > comments to restart).

  Has never seen this, or know a way to solve?

  I saw this happen not only with Windows 2012, but also with Windows 2003. The reason - at least how I understand it - is related to the fact that the closure of the RDP session (not a console session) gets, the shutdown process could be killed, which leads to a situation that is not defined. What I usually do to avoid such a problem is to use shutdown-i who starts a process that is not running in the RDP session, but on the host directly.

  André