Rede Drill

Similar Questions

• I have no sound coming out of my macbook pro and see a red light in the hole of the listener.

  I do not have its coming out of my macbook pro os x 10.8.1 but if an earphone is connected I hear the sound and there is a red light through the matter of earphone. What is happening to you can help me?

  The red light of the headset jack means the MacBook Pro thinking that an optical audio cable is plugged into the port. Try to have disconnected and reconnected a headphone plug into the port several times. There is a tiny sensor inside the port that determines if the port is operating in analog or optical mode. Something similar by plugging should trigger the sensor and restore the analog signal.

  If you don't feel capable in doing so the folks at Apple Genius Bar will be able to help.

• Apple icon flashes red once when starting the

  Suddenly, new iMac (drive merger) began to display a flashing icon of Red Apple at the start, but it does not start successfully, a bit slower than normal. A glaring red box box icon flashes red once during start up. Installed Sierra 10.12 on September 21, but this cannot be connected. With the help of an Apple technician, I put the machine through the

  • Disc utilities check App and through the restore process

  Reset SMC •

  • Safe mode starts

  • Memory NVRAM reset (three times)

  • Restored to point a few days before the problem occurred?

  Perplexing phone technician, and the master builder that he consulted had no answer. I am at a loss. Is there a problem, and if so, what should I do next.

  Thank you

  Pat (October 4)

  I have the same problem since I installed Sierra (2 days ago)

• 1 red appearing in the photos after upgrade to sierra

  Since I upgraded to Sierra there is a red "1" which appeared on the icon in the dock for Photos. Looks like just the numbers indicating how many E-mail messages I... Want to know if it means something, and if so, who, for what?

  This means that new photos or comments have been added to a shared album - view the picture or the comment to remove the notification or in the system of preferences turn off notifications for Photos

  LN

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support

• Red notification icon

  I have the iMessage app on my dock.  However, it is a number in a red circle on the right side of the iMessage icon.  I have no new messages, read them all.  How can I remove this red circle.  Thank you for your help.

  Quit the application.  Drag it off the Dock or control click > delete.

  Drag a new icon of the application.

• At startup, the Apple iMac logo flashes red after update to Mac OS Sierra

  After upgrading to Mac OS Sierra, my 2015 iMac 21.5 retina has a flashing red Apple logo, then a brief splash screen flickering when starting. Once started, the computer seems fine, with no obvious debris. I don't know why the logo flashes red and then the screen flickers - bad drivers; a problem of software in the start-up phase; a problem with the drive of the merger; or maybe some other gremlin? A quick search on the internet reveals that at least a few others have the same problem with this version of the OS, and it seems to have occurred in the years spent with any other version of Mac OS upgrades. But there is no good answers on how to fix this. I rebooted several times hoping it would clear itself, but no luck.

  Safe Mode boot removes the system caches that can help after an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• I use 3.6 numbers, how do I me negative totals displayed in red?

  I use 3.6 numbers, how do I me negative totals displayed in red?

  Select the cells that you want to apply to conditional formatting, and then open cell formatter:

  

  Click the button of "conditional formatting":

  

  Now click on the button 'add rule... '. »

  Now select the option ' inferior to ' under (my screenshot is less than or equal)

  

  now use 0 (zero) as the inferior to the value to identify negative numbers

  

  Now click on the "Done" button (to the right of 'add rule... »

  

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• Logic Pro - mixture with 1 track in the Red?

  HI folks, I'm just learn to mix and have my song sitting close to the way I like it, I kept all not too high and have used EQ on most of the tracks in my mixture to eliminate some UM and stop the instruments to be buried, however I have noticed that one of my main instruments arouses in the red in about 3.5 in the channel strip. I want to know is this a bad thing and it will cause problems when sending to the control?

  My main stereo output track is of approximately - 3db to leave enough margin, but if one of my pieces of lead is in red, it means that the track is cut?

  I tried to reduce it then becomes lost in the mix and tried to reduce all other tracks, but it does not really help. The FX only I have on it are Silververb Reverb and an EQ that does not have the massive peaks or win. I tried to add a compressor but don't know exactly how to help?

  Any help would be great and as always, thanks in advance!

  Red is much too much output, you cannot unclip a track, try adjusting your entries, you can 'tested' red when you blow of eye, but you don't want t keep it there. Play your song and adjust the levels until you just graze red to your strongest part and the rest of the track remains under the brand. Once the game you can save, now play the same thing you just did!

  also consider verb and post recording eq if you have not already, it will give you much more flexibility on the road when you mix, the less sleep you when you save the more effects you can add later, there are exceptions, but when the reverberation of the recording is not your friend, reverb is false whiskers for little boys or heels high MOM for girls to parts of the raw (Stephen King) that You can save and then add it later. You think that Hendrix went into the studio with a wall of effects boxes? That the strung a right-handed Stratocaster was left-handed and a plexi Marshall to have up to 10 with mic's all over the room, and he was wearing baseball cleats! (Eddie Kramer / me, speculating)

  If you have too much UM

  (1) turn on/down an overhead lighting, especially if you use a micro single coil.

  (2) try a different collection or watch in what you can do with what you have (single coil pickups are magnets noise when it comes to ground), some guitars are just dang noisy.

  (3) to adjust the gain of the amplifier, or your effects while it's fun to look like Tony Iommi and Max Cavalera and Brian Hayner to giving birth to a new distortion pedal at the same time, it is difficult to capture without sounding like a giant Bumblebee until you get the hang of recording.

  (4) to consider an external suppressor or see this document

  https://documentation.Apple.com/en/LogicStudio/effects/index.html#Chapter=4%26se ction = 10% 26tasks = true

  (5) a compressor can be used before or after mixing, as all the things you just plug in and walk away.

  http://www.PremierGuitar.com/articles/21690-the-recording-guitarist-dances-with-compresseurs

• He says I have a security problem where there is a red lock

  I don't know how to change the situations where the red lock

  Do you mean an icon to the to the left end of the address bar?

  • https://support.Mozilla.org/KB/mixed-content-blocking-Firefox
  • https://support.Mozilla.org/KB/Control-Center-site-privacy-and-security-Firefox

• Have a grey bar at the bottom of the screen with red print that I can't remove.

  Since a recent update a gray bar with red print appears at the bottom of my home page every night and I can't get out. It does not appear to be a problem with any function, but I would like to know what it is and how to close it.

  Hi, this is a bug with adblock more in the latest nightly. Please see if they already have an update is available to fix this known or well to keep the disabled extension for now...

• That means red in the recipient field?

  Sometimes when I'm composing outgoing e-mail, the address that I type in the recipient field appears in red, and sometimes it appears black. It is on Thunderbird 38.3.0, but it happened with the last several versions.

  Initially I thought that Red means that the address is not valid as typed in, or (b) the address is valid, but not present in the address book. However, it seems now that red appears randomly and often enough, even if the message is a response (and I do not have the automatic collection of addresses on) or even if I know for sure that the address is displayed in my address book.

  Can someone explain what color is it wants to say?

  (Of course, now that I've raised the issue, I can not reproduce today to give you a screenshot. "But it happened).

  Black - is in the address book.
  Red - not in the address book.

  Could be red if the address is not EXACTLY the same as in one of the books usual address, (not "Collected addresses" or 'All address books'). This feature can prevent the misspelling of an e-mail address,

  There is also a problems bug report with the red text when you manually add an address in a window of writing. It's just a Visual thing, it does not prevent the message being sent. Just check out double for a misspelled address.

  TB - 38, 3 Win10-PC

• Red letter "A" appears in the top left

  I got this red letter 'A' in the top left corner in some Web sites. No idea what it is and I want to get rid of once and for all. I hope someone can help. Thank you!

  You can list the installed extensions?

  • https://support.Mozilla.org/KB/using+the+troubleshooting+information+page

  If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)

  • Windows: File > Exit
  • Mac: Firefox > quit Firefox
  • Linux: File > exit

• Caftor Adom put a red button next to my toolbar. Please help me to remove it.

  Caftor Adom seems to be an organization in Israel that resembles the document web sites that encourage violence. Somehow, I have responded to some sort of message on their part and they added a red button under the "Open Menu" icon in my toolbar. I would like to get rid of him but I can't figure out how. If I click on the red button, they bring a window that asks me to make a comment and add some sort of code for something on the website violent that I entered the document. And then I'm supposed to pass. I sent emails and obviously non-violent web sites, including their own, asking them to help me remove the red button. I got no response. It's on the window of Mozilla so I hope you can help me to delete. It just seems to be a nuisance, and you never know. I will include a screenshot that shows that the button is outside the area dotted line put you aside for adding features to the toolbar.

  Thank you
  Steve mori

  I'm the one who asked the question above on the red button of Caftor Adom. The problem has been resolved by updating to Firefox. I forget exactly what the web site inspired me to try it, but it worked.

  Thank you