Redirect Google, random radio and firewall problem

Similar Questions

• My computer redirects me to random pages and turn my CPU at 100%... I think that his "ping.exe".can someone help?

  Original title: ping.exe

  I have something on my computer that redirects me to random pages and runs my CPU at 100%... I think that his "ping.exe".can someone help?

  MalwareBytes's AntiMalware - no AntiVirus. ;-)

  Probably your best bet - flatten (wipe) the system and start from scratch.  You will need your most recent backup (your stuff, like your documents, photos, music, video, spreadsheets, databases, presentations, bookmarks/Internet favorites, e-mail contacts, serial number, proof of purchase/receipts, that may have been scanned in, etc. and so on...) and a good list of installed software and hardware specifications (I suggest Belarc Advisor running on the current system and print the results if possible) then you can get the drivers before or after installation.

  Of course, you will also need your multimedia installation product key/serial numbers and that go hand in hand.  In Windows XP - there is no way for me to know (without telling you) what level your installation CD is... so you will need to install the SP2 and SP3 after installing the operating system.  I would leave it disconnected from the Internet (physically) until it is at least SP3 and you have confirmed its firewall is enabled and, if possible, you have installed an antivirus application.

  For you, I suggest the eSet 32 antivirus (not more) - which costs ~ $60 every two years for private users.  Add to that the MalwareBytes full package which costs, if I remember, ~ $25 for life.

  Then, once the system * is * connected to the Internet (physically) - get hardware drivers installed for everything and the rest 100 + installed post-SP3 updates.  Then you can worry about all your other programs and restore your files LAST.

• My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

  I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I have the same error message on Google & Shaw and BC issues, but I also use Safari accessing google through Shaw is the problem with Firefox?

  The problem seems to lie between Firefox & Google talk to each other. I also use Safari as a browser, also liked to Shaw and don't have no problem with Google Mail, (cards and other sites which now belongs to Google.)

  This is caused by the network of Shaw, they are working on a resolution, but in the meantime the fix above will work. After Shaw solves their problem be sure to reset this value by default is that it is a safety device, you do not want allowed.

• I have Pandora Radio and he plays only a song and must then be restarted. He has not done this before. No idea how to solve this problem?

  I have Pandora Radio and he plays only a song and must then be restarted.  He has not done this before. No idea how to solve this problem?

  Hi Howard,

  -What version of Windows you are using on the computer?

  The question you posted would be better suited in Pandora Radio support Forums. Contact them for assistance. Please see the link below.

  www.Pandora.com/contact

  www.Help.Pandora.com

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• Problems with utl_https, Oracle Wallet and firewall

  Hi all
  We experiment utl_http and Oracle wallet and try to make a transfer of https, but we are facing some problems. I'd appreciate your help greatly if you can advise on what could be wrong. We are on db version 10.2.0.1 and Unix HP - UX and operate since in a firewall. The intention is a https url ping command and get a 200 simple answer. Future development would include documents XML get/post to this url and other interesting things. I understand that utl_http with Oracle wallet can be used for this purpose.
  
  The portfolio was created and the ewallet.p12 exists. We downloaded the url Web site SSL certificate and downloaded in the portfolio. Everything works if I put in a url with http simple but then things work with a HTTP * S * url. Is what is called HTTPS TUNNELING required because we have a firewall? I don't know what it is or how it can be done.
  I tried https with a URL internal breast of the firewall. But again, no luck. -So probably not just a firewall problem.
  With HTTPS when I run the code below, I get the following error with https internal or external sites. Yet once, greatly appreciate your time and help because it is the first time us use Oracle wallet manager and don't know where to go from here.
  
  ORA-29273: HTTP request failed
  ORA-06512: at "SYS." UTL_HTTP", line 1029
  ORA-29268: error of the HTTP client
  
  declare
  URL varchar2 (225);
  Utl_http.req req;
  resp utl_http.resp;
  my_proxy BOOLEAN;
  name varchar2 (2000);
  value varchar2 (2000);
  V_proxy VARCHAR2 (2000);
  v_n_proxy varchar2 (2000);
  v_msg varchar2 (100);
  v_len PLS_INTEGER: = 1000;
  BEGIN
  -Disable the verification of the status code.
  Utl_http.set_response_error_check (false);
  -Set proxy server
  Utl_http.set_Proxy ('my-proxy');
  Utl_http.set_wallet ("file: < Unix full path to the wallet on DB server > ',' wallet998'");
  Req: = utl_http.begin_request ('https://service.ariba.com/service/transaction/cxml.asp');
  -Authentication proxy set
  Utl_http.set_authentication (req, 'myproxyid', 'myproxypswd', 'Basic', TRUE); -Use HTTP Basic
  
  resp: = utl_http.get_response (req);
  
  FOR i IN 1.utl_http.get_header_count (resp) LOOP
  Utl_http.get_header (RESP, i, name, value);
  dbms_output.put_line(Name ||) ': ' || (value);
  END LOOP;
  Utl_http.end_response (resp);
  exception
  while others then
  dbms_output.put_line (SQLERRM);
  END;

  user11992646 wrote:

  The difference between your method and this new method is that you spend the user_name: pswd as part of the url, so here it is passed as a parameter of the set_proxy.

  Using the user name and password in the proxy URL is often the easiest way to deal with authentication of the proxy - even supported under Linux with the environment variable http_proxy (that you can set for s/w to detect which is the proxy configuration, when access to the web).

  Would be in him passing a part of set_proxy also be considered as in "clear text"?

  Don't know exactly what it generates http traffic. Likely basic auth?

  It may seem that some form of "+ encryption +" is done with basic authentication. The user name and password are strung with a colon separator and then encoded in base64. So, the resulting string seems encrypted to the human eye, but can easily be decoded again (no secret necessary to perform decoding).

  So this is about as insecure as passing user name and password in clear text - darkening bit added to the meter reading it naked.

  In the Windows world (where it is stuck inside and look at the free and open to the outside Standards), proxy servers often use NTLM (new technology/LAN Manager) authentication. Not this again as LanManager goes back to BACK 5 project of the 1980s. ;-)

  Anyway, NTLM is a proprietary protocol and not easily supported when you code using UTL_HTTP. Basic authentication will fail in this case, the proxy expects that NTLM authentication. The workaround is to add the user name and password to the URL of the proxy (as I did in this example code).

  My problem is why set_authentication does not require us to use methods "unsupported"? It seems an obvious Oracle bug that they must solve.

  I think that you also use NTLM authentication on the proxy server? This isn't a standard. It is the crass seller proprietrary. No real compelling reason for other providers to support - especially not when there are open standards available and used.

  We have a beautiful SR and you said that you have opened a SR before without success. I'm surprised Oracle is dropping the ball on such a useful tool.

  My SR has been essentially around get UTL_HTTP proxy access work with NTLM - where workaround has been as I described. I don't see this as a particular problem, Oracle have to solve.

  The question is a consequence of the decision to use proprietary protocols and "+ standards. If anyone is to blame, it's Microsoft and their attempts at blocking of clients in a complete solution of owner. Unfortunately, these attempts often succeed too.

• Impossible to get online - reading HTTP/HTTPS/FTP Firewall problem

  I cannot get online and diagnosis to assess the problem.

  The error I get indicates that it is a firewall problem; However, when I disabled my firewall and tried to connect, it still wouldn't let me.  I ran the diagnostic and received an error message that passport.com certificate is expired.  It is said that the system could not connect over HTTP/HTTPS and FTP (passive) was able to connect.  Help, please.  Thank you!

  Sorry try this first...

  You can change the behavior of the Internet Connection Firewall by turning on various ICMP options, such as allow an incoming echo request, allow incoming timestamp request, allow incoming router requestand Allow redirect. Brief description of these options appear on the ICMP tab

  If your network uses Internet connection sharing to provide Internet access to multiple computers, it is recommended to activate the shared Internet connection on the Internet Connection Firewall. However, you can activate the shared Internet connection and Firewall Internet connection separately. It's a good idea to enable the ICF on the Internet connection on any Microsoft Windows XP computer that is connected directly to the Internet.

  Internet Connection Firewall can also help protect a single computer connected to the Internet. If you have a single computer connected to the Internet with a cable modem, a DSL modem, or a dial-up modem, Internet Connection Firewall protects your Internet connection. Do not cut the ICF for virtual private network (VPN) connections because Internet Connection Firewall interferes with file sharing and other VPN functions.

  ??????????????????????????????????????????????????????????????????????????????????????????????   OR

  http://support.Microsoft.com/kb/936211/en-us read up on that let me know if this helped.

  Internal modem

  To restart an internal modem, you must restart the computer. If you still experience network connectivity problems after you restart the computer, go to step 2. If you connect to the Internet using a router, there may be a problem with the configuration settings, and they must be updated. To determine if a network connectivity problem is caused by a bad configuration or a problem with the router, you can bypass the router and connect your computer directly to the modem.

  Warning Connect your computer directly to the Internet may be left vulnerable to attacks. To protect the computer against attacks, make sure that a firewall is installed and that the firewall is enabled on your computer. To learn more about the Windows Firewall that is included in Windows Vista, see the "Windows Firewall" section.

  Windows Firewall

  Windows Vista includes a firewall, called Windows Firewall. By default, the Windows Firewall is enabled. However, you should always check that the Windows Firewall is turned on before you connect the computer to the Internet. To verify that Windows Firewall is turned on, follow these steps:

  1. Click Startand then click Control Panel.
  2. In the search box in the upper right corner of Control Panel, type security.
  3. In the search results that appear, click the icon or the link to the Security Center. In the window that appears, you will see four bars that are titled firewall, automatic updating, malware protection, and other security settings.
  4. Click the arrow to the right in the firewall bar to expand the bar. The extended bar will display one of the following three options:
     1. If the firewall bar is green, it means that the firewall is enabled.
     2. If the firewall bar is red, you may see a message that the Windows Firewall is disabled. To turn on the Windows Firewall and cause the firewall bar to the center of safety to turn green, click activate now.
     3. If the firewall bar is red, and the message describes a problem with a third-party firewall program, we recommend that you disconnect the computer from the network and then contact the vendor of the firewall program for more information on how to activate the third-party firewall program.

• Redirect Google redirection only microsoft sites, once you have downloaded microsoft xna?

  IM using my moms because computer that I can't get on all Web sites related to microsoft. I downloaded xna on microsoft.com (games development). Now I need to download a separate package and it won't let me! If I type in microsoft.com it redirects me to google. and if I google the package, I need and you click a microsoft link it gives me a 404 error. What can I do? He let me anti viral sites, but nothing can detect a problem. Ive checked for rootkits, malware, viruses, etc and still nothing. IM at a loss. Ive tried a lot of videos and tactics to fix and his also does not help. I also have google installed crome and I tried to use it to connect to microsoft.com but he redirected me also, so I know this isn't a problem with internet explore. Thank you!

  Hello
   
  Did you do any changes to the hardware or software on your computer before this problem?
   
  Method 1:
   
  I suggest you run a scan antivirus using Microsoft Safety Scanner in safe mode with networking to check if your computer is clean of any infection by the virus.
   
  Step 1:

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   
  NOTE: see 3 from the link above, Advanced options boot (including safe mode).
   
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  Select Mode safe mode with networking.
   
  Once in safe mode, run step 2.
   
  Step 2:
   
  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.
   
  Method 2:
   
  (a) open Internet Explorer by clicking on the Startbutton and then about Internet Explorer.
  (b) click on the Toolsbutton and then click on Internet Options.
  (c) click the connectionstab, and then click LAN settings.
  (d) clear all check boxes, including the proxy settings, if necessary
  (e) restart Internet Explorer.
   
  Hope the information is useful.

• iPhone 5 c randomly open and use apps

  Ive had my Iphone 5 c for a few years and never had any problems. But recently I've had a few problems with applications seemingly randomly are opened and used. Used by sense that things will be clicked or pressed. For example, once I looked at my phone to see that he changed their apps and missing out on my clock application, go to the timer and had set a random time and tune. Currently I wouldn't be a game and have him by my side just to come turn on my screen and see several things in the game be enabled (for example, power-ups etc.) what is strange, is that I saw never actually happen. Instead things listed above will be only seem to happen when my phone is in my pocket or on my side. Also I don't understand how he could unlock my phone, even though I have a password.

  Before that, I dropped my phone on an outdoor stone floor causing in the middle of the screen to feel strange and cheerful (hard to describe). I did not notice that other problems and even this problem with the screen do not seem to affect my phone somehow major.

  Is there a possibility that my phone might have been hacked?

  Or could it be something to do with my screen is broken?

  I just want to know the problem so you can fix and ease my mind.

  Currently on IOS 9.1

  Any help or advice would be appreciated.

  Hello!

  It sounds like you are dealing with a ghost screen.

  Given that the phone had some physical damage, this problem may be related to the phone screen and a repair of the screen may solve the problem.

  You will first need to isolate the problem to see if it is software or hardware related.

  I would say to backup the iPhone via iTunes or iCloud and restore as a new to test and see if the problem persists. If so, its more than likely the screen of the iPhone. Hope this helps

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• Filestore72 redirect virus on iPhone and iPad?

  Hello

  In the last day I got redirected to FileStore72.info and a.1nimo.com when a click from google to a known site of automotive discussion forum.  He can't seem to others sites and if we stop then starts them running again, he gets to the right place. This has happened on an iPhone 6s and an old iPad retina 2, both running iOS 9.3.1.

  Ive not met before on iOS devices and can't seem to find much about it for Apple products, just Windows.

  He arrived as well on wifi at home, as well as on ATT LTE service.

  Any suggestions?

  Post edited by: JHZR2

  Try to remove the Google Chrome app and put it back, if it's the browser you were using.

  If Safari, try to reset the it. Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. Then go to settings > Safari > clear the history and data from the Web site. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

• Random reboots and freezes on end 2009 27 "iMac

  iMac (27-inch, late 2009)

  Intel Core i7 2.8 GHz

  8 GB 1067 MHz DDR3

  ATI Radeon HD 4850 512 MB

  Random freezes usually when Safari is running but not always - Random reboot to gray screen - multiple messages indicating problem with function sleep-wake

  I have;

  Re-installed OS 10.11.4 several times

  Erased the hard drive completely by booting from a USB key

  Run the system for several days without any migrated data or no additional program outside the standard OS X installed programs.

  Reset the PRAM

  Unfortunately, I can't start diagnosis Apple when restarting.

  I perform diagnostic tests according to the Linc Davis post with the results posted to the pastebin. See the link below.

  Random freezes and...

  Thank you and very grateful for any input...

  You seem to be dealing with a hardware failure.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver