Redirect to Apache

Similar Questions

• OSX Apache Server: how to redirect the http request?

  Hi all

  I have a Mini Mac OSX Server El Capitan running. It already serves some sites. Normal Server Web sites:

  -site1.example.com

  -site2.example.com

  Now, I have installed an application that has its own built-in web server. This application would be normally accessible via http on port 80. However, http on port 80 connections are automatically considered trapped by integrated apache of the OSX Server. Therefore, I now put the web application to run in a different port to apache. I also setup a subdomain, so that users can access this application directly, but they also have to type in the port in the URL - for example, the new web app site is reachable at the:

  -myapp.example.com:7117

  What I would do, is for users to simply access the application using:

  -monappli.exemple.com

  I know that there is a way for us to have apache to "Reroute" all requests for a specific to an internal port subdomain automatically, but I don't even know where to start. What are the files we need to configure on OSX Server? How configure us them?

  Any guidance would be greatly appreciated.

  I had the same requirement and has resolved the way you want to as described below.

  1. Define the additional app to run on another port
  2. Create a site in.app using port 80 and the same host name you want to use for the additional application
  3. Set up a redirection for this site in.app as follows
  4. Source = /, Destination = http://hostname.domain.com:1234 /, Status = Permanent (301)

  Of course, use the correct host name, the domain and port for your situation.

  PS. the same approach I have described above also can be used to redirect the corresponding https port 80 or 443 site.

• Redirect the http to https

  I use OS X Server with OS X 10.10.5 5.0.15.

  I have 2 domains pointing to the IP address of my machine OS X Server by using DNS.

  Users.NewSite.com and users.oldsite.com

  The configuration of the domain for the OS X Server machine is users.newwebsite.com

  It comes as the site server configuration and I also have a Web Server (SSL) site configuration as well.

  I have a configuration of the redirect for "Site Web Server" redirect to the website Server (SSL)

  This part does not work properly.

  The problem is with the second field.  If people type in users.oldwebsite.com they get an error message that the connection is not secure.  It seems that the browser is trying to redirect the http://users.oldsite.com to https://users.oldsite.com.

  I need all calls to http://users.oldsite.com to redirect to https://users.newsite.com

  Or really something starting with http://users. should redirect to https://users.newsite.com

  Is this possible with regex?  If so, what the expressions would look like?

  Website of the Apache and the documentation is the canonical source for more information on RewriteRule examples and examples of redirection, mod_alias and mod_rewrite.

  A slightly twisted example of the Apache documentation:

  < VirtualHost *: 443 >

  ServerName undesired.example.com

  ServerAlias example.com notthis.example.com

  Redirect ' / ' "https://www.example.com/".

  < / VirtualHost >

  < VirtualHost *: 443 >

  ServerName www.example.com

  < / VirtualHost >

  The second VirtualHost entry is for the host site for your choice, you will probably already have this present block in your configuration file:

  /Library/Server/Web/config/apache2/httpd_server_app.conf

  There are various examples and discussions of this publication autour of the ' net like this to StackOverflow.

  FWIW, newsite.com and oldsite.com are real and registered areas.

• broken redirects after removing pdfforge toolbar Add on

  I finally got fed up being redirected to a capture page when a URL is not found. Pdfforge toolbar that has installed a time was looong ago when I installed some other add-on I no longer use (print the pdf or something?).
  in any case, it seems now that all redirects are broken.
  I get mild like things:
  Definitive change of address

  The document is moved here.
  Apache/2.2 server at www.boingboing.net Port 80

  much more broken pages that require redirects.
  in fact mozilla pages come in white. assignment to another computer...

  I 'warn me when websites try to redirect or reload the page' disabled in prefs.

  Please update Firefox 20 Firefox updated to the latest version

  Then try resetting Firefox, Firefox Refresh - reset the parameters and modules

• Even iTunes 12.3.3.17 covers issues HTTP/1.1 redirect (302) to podcasts?

  Since the update to iTunes 12.3.3.7 (and El Capitan), all my podcasts from a particular site is no longer download it.

  I have a lot of other podcasts (from other sources), which have no problem download at all.

  Download little cloud appears right in my list, and when I click on it I get the "!" on the left of the podcast, which tells me:

  

  I tried to access the podcast of another device (PC) and the podcast is perfect.

  Reinstalled iTunes, recreated the file .xml to iTunes, without change.

  Unsubscribe, delete, re-subscribe. Tried many things. Nothing helps.

  So I decided to launch Wireshark to see what was going on, and came to the conclusion of iTunes seems to have a problem with a redirect, gets it from the Web site.

  The HTTP/1.1 request from iTunes request to FIND http://rf.proxycast.org/1153838588270485504/16256-18.04.2016-ITEMA_20963865-0.mp 3

  which is a page empty

  The server responds with a redirect 302 http://media.radiofrance-podcast.net/podcast09/16256-18.04.2016-ITEMA_20963865-0 .mp3

  She the podcast indeed.

  So, my guess is that iTunes has trouble dealing with this redirect. Unless it's something else, but I don't know what.

  Any ideas?

  The full conversation is here:

  GET /1153838588270485504/16256-18.04.2016-ITEMA_20963865-0.mp3 HTTP/1.1

  Host: rf.proxycast.org

  Accept: * / *.

  User-Agent: iTunes/12.3.3 (Macintosh; AppleWebKit/601.5.17.1 OS X 10.11.4)

  Connection: close

  Cache-Control: no cache

  HTTP/1.1 302 found

  Date: Thu, 21 April 2016 19:41:03 GMT

  Server: Apache

  Set-Cookie: e = VxkszwqAhy0AAB3ncdEAAAID; Path = /; expires = kills, 16 May 17 19:41:03 GMT; Domain = proxycast.org.

  «P3P: policyref="/w3c/p3p.xml",CP="NON DSP COR CURa PSA PSD OUR BUS NAV STA»

  Location: http://media.radiofrance-podcast.net/podcast09/16256-18.04.2016-ITEMA_20963865-0 .mp3

  Connection: close

  Content-Type: text/html; charset = iso-8859-1

  Does anyone have an idea about where to look this problem?

• Redirect https admin page?

  Hi Forum,

  I installed 6.4.0 without problems.

  However, the admin page is now exposed to the Internet over HTTP, which I see as a potential security risk.

  Is it possible to point the http://somedomain.nl/ to a webshare and point http://somedomain.nl/admin to https://somedomain.nl/admin?

  This will block remote access to admin pages, because HTTPS is not allowed on the router.

  On the internal network, I would still be able to connect to the admin via HTTPS pages.

  Figgered out. Let's say you have created a Web share directory from the Admin page, called "your_webshare_dir".

  VI /etc/frontview/apache/Shares.conf

  Change

  Alias "/ your_webshare_dir" "your_webshare_dir / data / '.
  
  
  
    Options Indexes + includes
  
    Order allow, deny
  
    Allow all the
  
    Options - ExecCGI
  
    AllowOverride None
  

  TO:

  AliasMatch "^ / (?). Apps/.*)(.*)$"" / data / your_webshare_dir / $1.
  
  
  
    Options Indexes + includes
  
    Order allow, deny
  
    Allow all the
  
    Options - ExecCGI
  
    AllowOverride None
  

  Nothing, except the icons of the apps in the Admin page will redirect to your webshare.

  VI /etc/frontview/apache/http-share-redirect.conf

  RewriteEngine on
  
  #RewriteRule ^ / $ / admin [R, L]

  This will disable the auto - redirect to the administration page when you go to http://your.domain.com/.

  VI/etc/apache2/sites-available/fv-http-admin

  
          Include "/ etc/frontview/apache/defaults.conf".
  
          Include "/ etc/frontview/apache/http-redirect.conf".
  
          Include "/ etc/frontview/apache/http-share-redirect.conf".
  
          Include "/ etc/frontview/apache/fv-admin.conf".
  
          Include "/ etc/frontview/apache/Shares.conf".
  
          Include "/ etc/frontview/apache/apps-https.conf".
  
          Include "/ etc/frontview/apache/READYDROP.conf".
  
          Include "/ etc/frontview/apache/lan-try.conf".
  

  Make sure that http - redirect.conf is included in the list of configurations.
  (Note: don't know why it's necessary, but it, it works for me.)

  WARNING: Use at your own risk.
  Known issues: these setting changes will be overwritten when you make an update of the firmware.

• How to configure Apache to send the queries based on the domain name to the forms, www and Servlet directory?

  Hello

  I installed Oracle Forms 11.1.2.1.0 on a Linux server.

  This server will run a Forms application, a web site and a Servlet for a couple of unique clients.

  Each client accesses its own applications through its own domain name.

  For ex:

  http://Customer1.mydomain.com/forms/frmservlet?config=CUSTOMER1 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer1.mydomain.com/www -> Directory access... local/htdocs/customer1/www

  http://Customer1.mydomain.com/myservlet -> Weblogic 7101 port forwarding. This a new server created in the field of Weblogic to run Servlet. Each Servlet will be deployed with a specific context by customer: myservlet/customer1 /

  http://Customer2.mydomain.com/forms/frmservlet?config=CUSTOMER2 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer2.mydomain.com/www -> Directory access... local/htdocs/customer2/www

  http://Customer2.mydomain.com/myservlet -> Port forwarding Weblogic 7101 with PathPrepend: myservlet/customer2 /

  My idea is to configure the Apache Server using 1 VirtualHost by customer:

  < VirtualHost *: 80 >

  ServerName customer1.mydomain.com

  ServerAlias *. Customer1.mydomain.com

  DocumentRoot "/ u01/app/fmw/asinst_1/config/OHS/ohs1/htdocs/customer1/www.

  < /myservlet location >

  SetHandler weblogic-Manager

  WebLogicHost myhost

  7101 WebLogicPort

  PathPrepend /customer1

  < / location >

  < / VirtualHost >

  Is this a good approach?

  Can I place block < location > < VirtualHost > block?

  From what I've read on the web, it is the common way to request proxy based on URL.

  My first tests raised an error like: CONFIG_ERROR [line ap_proxy.cpp 1735]: 'WebLogicCluster' or 'WebLogicHost' specified in the parameters of

  That's why I wrote this question.

  Further more, can I add a specific redirect for forms inside the VirtualHost customer who will redirect

  http://Customer1.mydomain.com/forms -> Redirect to Weblogic Port 9001 (Forms) adding /frmservlet? config = CUSTOMER1 you URL?

  Thanks in advance.

  Your approach is correct, but there are a few details that need tweaking. Can take place inside VirtualHost. Have you enabled ability to host virtual by uncommentNameVirtualHost *:80 in httpd.conf?

  


• Configuration of Apache by default port problem.

  Hi Experts,

  Today, I met a working port of apache configuration.

  My scenario:

  I have a domain with a managed server (both on the same machine) and also, I have configured apache server using code below,

  < location / >

  SetHandler weblogic-Manager

  WebLogicHost 192.0.0.1

  7005 WeblogicPort
  

  < / location >

  The application runs on port 80 by default. Thus, when the user access to the DNS means www.support.com (example) means that it redirected to the 192.0.0.1. Then user acesss the homepage of the

  request. So far no problem.

  My requirement is, if the user accessing the DNS also redirected www.support1.com(another one) to the 192.0.0.1 and also access home page of the application itself. But what I want is, need for the user to access the specific page (example: billing page) in the application, not the home page.

  I don't want to set up separate port (apache level) and separate the IP (DNS level) for the www.support1.com.

  I tried to write the virtual host inside of this I used the name of the server, but it does not work.

  Can I write the IF ELSE condition in the httpd.conf file as if your access from the ww.support.com go to this URL to go to that URL (billing page)
  

  Please share your expert suggestions.

  Kind regards

  Simo.

  Hello

  Try to change the rule for this:

  RewriteRule ^ / $ /faces/NewCustRegisteration.jspx [R, L]

  Your original rule was rewriting / / also, so no rewrite real does.

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• The Apache 2.2 Server CONNECTION_REFUSED (the channel to the server weblogic 10.3.6)

  • I have created a web service using Jdeveloper 11.1.1.7 application and deployed on weblogic 10.3.6 on physical server we call let back-end server.

  
  

  • I don't want customer to give direct access to back-end server so I make use of Apache 2.2 , to be in the middle of client and back-end server. Apache 2.2 is configured on different physical servers call the middle Server.

  
  

  • I set the application root context (which has deployed in back-end server) on middle Server in the file httpd.conf of Apache.

  
  

  • I shared WSDL to the client of the file location ( WSDL URL which referring to the domain name Server middle ). The external client can access the URL thorug browser where they can see the WSDL content
  • But when the client attempts to send queries to Server Middle URL he get rejected with the following error:

  [error] [Public IP of the customer - clinet goes here-] ap_proxy: POST by train / [insert here the root of the application context] to the back-end host "[back-end local IP Server] / [insert here the port];" "except ' CONNECTION_REFUSED [operating system error = 0, line URL.cpp 1602]: call apr_socket_connect failed with error = 730061, local = [back-end IP Server] host, port = [insert here the port]"

  This error of Server Middle Apache error log file. No backend server log

  What happened so far:

  1. I check if I have access to the Server Middle user external to use the Telnet order. Telnet IP port . He works and the Server middle is listening.
  2. I also checked for all ports. external client and Server middle, between middle Server and back-end server , also using telnet. All ports work.
  3. In this answer: ssl - Apache 2 with Redirection of plug-ins for Weblogic, original location still requested to backend - lack of server

  It is suggestion to increase the value to accept orders of weblogic server setting. I did to the back-end server , but still the issue is not resolved.

  Problem solved

  I need to activate the option (WebLogic plugin active) WebLogic server where the application is deployed

  the structure of the field (left in the administration console Panel) - > environment - > servers-> (select the server where you deploy your application in this topic)--> general tab (from the server parameter)-> Advance - > (ICT option) WebLogic plugin activated

  Then restarted the server.

  Hereby you are telling the server you'll get indirect request through server proxy or balancer for example

  You can do this on several levels, such as cluster or a server based on your needs check out this site for more information

  http://www.Ateam-Oracle.com/WLS-plugin-enabled/

• Need help in configuration of Proxy reverse using Apache - R12

  We have a reverse proxy configuration using Apache 2.2 for Oracle Apps R12.
  Demand is expected to go this way: Load Balancer (Port: 443) (https)-> reverse Proxy (Apache-> Server(Port: 8000) Application)(Port: 8000)-> database (Port: 1521).
  Application is configured in https mode.
  
  Now, when we go to the URL we get initial redirection page. i.e.
  The E-Business Home Page is located at https://upgtest.ultimatix.org/OA_HTML/AppsLogin
  If your browser is not automatically redirect to its new location, click here.
  
  Then after redirection we get 404. Single application (without the reverse proxy server) works very well. We get the problem when you use the reverse proxy server between the two.
  We receive a 404 error on apache reverse proxy server. Please help us to solve the issue.
  Need urgent help. Best regards, Stéphane

  We have successfully configured. The installation works fine now.

• former site a php pages how redirect the new html pages and save ranking SEO

  I have an old site that each page has the estention of php. I recreated a new Adobe Muse site, and every page is html.

  1. from the old site has established SEO, how do I redirect these pages to the new site (pages) to maintain the status of SEO?

  2. as soon as the new site is in mode proofing catalyst for business, do I have to wait until the new Muse site is launched to the host?

  Please help, I'm not super familiar with coding so as simple as possible!

  Well, if your use not BC you use BC or Muse to do all this.

  If you have just flat files generated in Muse you put on a hosting with any CMS depends on the host, but it must now make a path setting redirects complex either at the domain level, or manually by... IF PHP server for apache etc. example configuration files

  So this isn't a matter of Muse or BC and according to hosting where goes and what it is you need to work with anyone or to your work with people to do, or ask the server and options you have available.

• Journal of R12 SSO on redirecting to the home page of R12

  Hi all

  I joined R12 with SSO. After clicking on connect, it redirects to the home page again after trying for a while to close your session in the sso page. Help, please.

  Environment, R12.1.3, Aix 6.1

  Kind regards

  Cherkaoui

  Hi Haran,

  Please confirm if the recent changes have been made, and this feature was working fine before.

  Please see if you can find more details in the log of Apache and Application files.

  Please also have a look at the notes:

  Logout link in E-business Suite does not return to the SSO login Page when using Ondaaah (Doc ID 735308.1)

  Thank you &

  Best regards

• How to add or context path of redirection to the portal path explicit Webcenter

  Hello world.
  
  I have deployed an application with framework-path is ubck to the weblogic server. So I have to enter additional context after root to access this application. For example:
  My server is for "http://myserver:7003", I have to enter "http://myserver:7003 / ubck" to access this application.
  
  After that, I tried to compile/build Apache HTTPD server to v2.2 for the load balancing between the managed servers. My application can be accessed via 'http://webtier/ubck' at the moment.
  
  My question is how to install auto prepend "ubck" my path to the application. This means that if I entered http://webtier/, I will redirect or to accede to my request.
  
  My portal webcenter application cannot change the context path to /.
  What is the solutions?

  You must use mod_rewrite of Apache in your HTTP server. See:
  http://StackOverflow.com/questions/2766443/use-mod-rewrite-to-rewrite-root-to-another-path

  RewriteEngine on
  RewriteRule ^ / $ / page [R]

  This will rewrite the root of your server HTTP/page/page pointing to the path of the context of your portal.

• 404, htaccess and 301 redirect

  I have a muse site hosted on windows azure.

  I created a .htaccess file and added o the root.

  Web page isn't always redirect to the page of 404 error or my 301 redirect I put

  htaccess works on Apache servers, not on Windows Azure. I think you need to read the documentation of Windows Azure that would do what you want.