Redirect to issue when using WSRP

Similar Questions

• Performance issues when using Premiere Elements for photo slideshows

  Hello

  I had been with the first Elements 9 (PE9) to create a simple slideshow for my parents for their holiday trip, and I came across some problems serious performance.  I had used to create similar projects before, but not as big.  It's like 260 pictures, so basically it's 260 separate clips.  I have a workstation of the PLANT (see below), so it's not my PC.  Even when PE9 breaks down, looking at my performance of my CPU monitor and RAM are not yet half used.  Finally, I went to Windows Movie Maker of all things, and it worked flawless, amazing really.  I wonder if I used just PE9 about something other than what it was designed for since there were not really video clips, just a ton of photos I made in video clips, if that makes sense.  Given my experience with it so far, I can't imagine using PE9 for anything really.  I might need the professional video editing software in the near future, although it seems like PE has a lot of features.  How can I make sure that it uses my computer to its full potential?  Here are my specs:

  PC

  Intel Core i7 - 2600 K 4.6 GHz overclocked

  ASUS P8P67 Deluxe Motherboard

  AMD over-pants V8800 card video

  Crucial 128 GB SATA 6 GB/s Solid State Drive (operating system)

  Corsair Vengeance 16 GB (4x4Go)

  Corsair H60 cooler liquid

  Corsair Professional Series Gold AX850 PSU

  Graphite Series 600 t mid-turn box

  HDD Western Digital Caviar Black 1 TB SATA III

  HDD Western Digital Caviar Black 2 TB SATA III

  Hard drive Western Digital green 3 TB SATA III

  Logitech Wireless Gaming Mouse G700

  I play all the games, but it's a mouse of high productivity with 13 customizable keys

  Wacom Intuos5 Tablet

  Yes, this system is incredibly fast.  I still have to slow down, even with Photoshop, Lightroom, InDesign, Illustrator and many other applications running at the same time the meaning.  HOWEVER, the first Elements 9 broke NUMERUOS times, every time that my system was not yet close to being fully taxed.

  Monitors - all work on the ATI V8800

  Reference Dell Ultra sharp 30 inch

  Samsung 27 inch

  HAANS-G 28 inch

  Herman Miller embody an ergonomic chair (one of my favorite articles)

  Premiere Elements often chokes trying large pictures of downsample - especially when there are more than 100 of them.

  Try to resize your image files and you should see a significant improvement in performance.

• Encoding issue when using Invocation/InvokeQuery in the Cascades

  I'm having a problem trying to share the Spanish text, using Invocation, seems to be a coding problem, but I don't know how to solve this problem, following code illustrates the problem. Rather than retrieve the text, I get this:

  This is the code I use:

  import bb.cascades 1.0
  
  Page {
      attachedObjects: [
          Invocation {
              id: invokeShare
              query: InvokeQuery {
                  id: invq
                  mimeType: "text/plain"
                  data: " ¡Tratando de compartir algo en español!"
                  invokeActionId: "bb.action.SHARE"
                  onQueryChanged: invq.updateQuery()
              }
          }
      ]
  
      Container {
          layout: DockLayout {}
          Button {
              text: "Click"
              onClicked: {
                  invokeShare.trigger("bb.action.SHARE")
              }
          }
      }
  }
  

  Hello!

  "data" parameter expects a QByteArray. By default, the string is converted to QByteArray using the ASCII coding. You will need to convert it to Utf8 instead. This can be done using a C++ helper function: http://supportforums.blackberry.com/t5/Native-Development/sharing-data-of-type-QString-using-Invocat...

• Aspire E1-571 latency issues when using native instruments traktor pro 2 Cant disable the throttling of the cpu

  help please really trouble running traktor pro2 without audio drop-outs because of the bios? limitation of the CPU? or usb drivers?

  I'm running on windows fully updated 8.1 and entirely bios update I have upgraded to 8 GB of memory to try to help and 240 GB ssd still no joy saw throw computer laptop out the window lol

  Would make sense because it does not point to more problematic usbport.sys could give it a go

• Strange glitch Visual on the taskbar when using Firefox

  Hello

  I feel a strange glitch Visual on the taskbar when using firefox.

  Please take a look at this short video because it shows the problem, it's almost impossible to show in pictures.

  https://DL.dropboxusercontent.com/u/12595174/VIDEO0016.3gp

  I use firefox on Windows 7 Pro 64 bit v36.0.1. Video card is an ASUS R9 280 X using the latest drivers from AMD 14.12 Catalyst Omega Software.

  Motherboard is an ASUS M5A88 with 16 GB of ram and a processor of 6300 FX.

  It is a new construction that I have implemented in the last 24 hours, and this behavior was not present on the system using the same version of windows, firefox and even map chart and drivers. But on another card mother and CPU. Previous Board of Directors has been
  M4A79XTD EVO with a Phenom II X 4 955BE.

  The glitching does not occur when it is on the desktop and firefox is closed. It will not occur when you use IE - 64 nor does it when I am using the steam software or any Explorer windows/opening files.

  All the motherboard drivers are installed correctly, the integrated graphics card is disabled in the BIOS. I disabled the settings of firefox for hardware acceleration, smooth scrolling and text... to see if it was the question. It wasn't.

  I'd appreciate any help to solve this... Really, I don't want to use a different browser but it's bad enough and quite distracting to really annoy me, and I don't see any alternative.

  Thank you very much.
  H

  Hi jscher2000

  I was about to post a reply, because a friend suggested that maybe that's a rendering of issue rather than a firefox one video card even if it's strange how it affected firefox only. I didn't have a chance to test it on Chrome as it is a new construction and I don't want to install the software, I do not use.

  I went to the Manager of catalyst and had a glance to the settings. I changed something, but no help... I then started to make a simple change and test until I found that the activation "gpu up-scaling" in the properties of digital flat screens has solved the problem.

  I am now free twinkle

  Thanks for your quick response however.

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Firefox redirects to google when server not found

  If I do a typing error in the address bar (for example, instead of www ww), instead of getting a message saying that the site is not found, Firefox started to take me to a page of Google search for the URL I typed in.

  Also, if I click on a link in a web page and the server in the connection no longer exists, I should get a message saying that the server is not found, but I'm redirected to a google search for the domain name in the link. It's confusing.

  Firefox redirects to google when server not found [SOLVED]

  Previously published in thread https://support.mozilla.org/en-US/questions/925517 (now blocked to I can't update it with the solution - maybe someone can add this solution to that thread?)

  Firefox redirects to google when server not found

  If I do a typing error in the address bar (for example, instead of www ww), instead of getting a message saying that the site is not found, Firefox started to take me to a page of Google search for the URL I typed in.

  SOLUTION: This was caused by the http://www.easyfundraising.org.uk EasyFundRaising toolbar (which I think could rest on the Google toolbar?)

  After disabling this plugin, the problem disappeared. I have notified the EasyFundRaising to this issue.

  Brian

  Added to a thread locked by a forum moderator.
  Above is 931684/questions/931684 by bcraigie
  
  (I'll leave this locked, locked presumaly because it drew spam)

• How to improve latency when using images high resolution

  I use a lot of images high resolution in my iBook, which creates a lot of lag when using author ibooks.  I have an end of 2015 with skylake processor i7 iMac and a decent amount of video ram.  Is it possible to improve this gap without use the workarounds like spreading the images until the end?  This is a limitation of the application?  I am able to work with images in Lightroom quickly with little or no lag, why I have this experience with ibooks author?

  It was common to use the placeholder images while editing, simply because of the question, you say.

  Regarding the ram, better for computer max (video ram isn't the issue) in all cases, but with the new Macs after having soldered to the ram, which can be difficult to correct after the purchase.

  Shame to see iBA still suffers this awkwardness, but oh well.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• Vertical lines shows that when using document feeder / have given help and discussions, no luck

  I have two printer hp models 1536.   Two of them have a vertical line when using the loader to scan or copy documents.

  When you place the point on the glass, scanning or copying is clear.

  Reading the discussions... tried to plug directly into the wall, cleaned feeder and glass, etc.

  I still have this problem

  Any ideas?

  Driver or firmware problem?

  The question is probably not a driver or firmware issue - it is probably a task on the thin glass used for playback through the ADF.  Try to clean the glass broadband of 1 "to the left of the main scanner glass. A tiny spec can cause the problem you are experiencing.  It can help to hold a flashlight almost parallel to the scanner glass to highlight all the stains on the glass.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• Static in speakers when using Skype

  I have a PC laptop HP Envy Touchsmart IS-j052nr, running Windows 8.1.  When I use Skype, either through headphones or the speakers, I have problems from parasites.  It sounds clear when I speak and when the person at the other end is speaking, but if the person on the other end does not speak for several minutes, then the static method noise becomes stronger and stronger (like a huge storm of rain falling at the hearing) until the other person makes a new sound.  The other person can also hear static.

  Is there a new driver, I can download to fix this problem?  When I scanned my computer on the support site there is no audio driver I was missing.

  Thank you!

  Hello SCLC.

  Welcome to the Forums of HP Support! I understand when you use Skype on your HP Envy Touchsmart j052nr IS running Windows 8.1 you hear static, whether you use headphones or speakers. Now you don't hear static noises when using Skype, or when using headphones or require sound from speakers?

  After some research on the Skype Support Forums, I've seen a few recommendations that I would like you to try to see if that reduces / removes this annoying static noise. Please follow the steps listed below:

  1 sign in to Skype

  2. go in Tooks > Options > General > Audio settings

  3 uncheck automatically adjust to the title of chapters of Microphone and speakers

  4. adjust the volume to your liking

  5 save and restart Skype

  If you are still having static noise, I wish that you continue here: Skype Audio issues troubleshooting

  Please reply back with the information requested, if the static noises are still there and it is only when you are using Skype, I recommend to go to the Page of Support of Skype as they would be able to help you.

  I'll watch for your reply.

  Source: www.skype.com/en

  Thank you

• I have no sound when using tube you at - it someone know why thanks

  I have no sound when using You Tube have tried without success the Speaker Volume

  Hi colinkinshott,

  Please read the following article that deals with this issue of particiular with a number of solutions: http://www.mydigitallife.info/2007/08/16/solution-to-fix-youtube-or-other-embedded-flash-video-no-sound-in-external-websites/.

  I hope this helps.  If not, what version of Flash Player do you use?

  Good luck!

• Disk activity constant when using vista home

  Original title: I am running Vista Home premium and am sick of the constant disk activity slowing things down. I canceled the programs start and automatic indexing, but again the thing vibrates far. Does anyone have constructive ideas?

  Constant disk activity when using vista home. Any ideas how to stop it?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum