(Redirect) Upgrade Dell 8700 to mirror RAID

Similar Questions

• Reference Dell 8700 and 460 Watt power supply: card of the highest Performance NVIDIA supported by Dell?

  What is the highest performance NVIDIA supported by Dell video card that you can put in a Dell 8700 using the stock 460 watt power supply? I put in a Geforce GT 640 in my 8700 for now but later want to upgrade without messing around with the upgrade of the power supply.

  Thank you.

  Hello

  'Officially', with the stock power supply, the GTX960 is the highest card, you can keep on XPS8700, 400W is enough for this card (will get mine installed tomorrow... MSI GTX960 games 4 GB).

  BUT, some people installed the GTX970, as well as a few model required PSU 500W min.

  It is the hope to allow you to take the "risk" or not.

  Remember to update your BIOS, first.

  And good read on the post, here on "XPS8700 and Nvidia GTX... »

• Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship.

  Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship. Two 1 TB drives, WD Black Cavier. 1. I wanted to know if I should format the OS drive first, before installation or installation? 2 should I let a slave to data disc (data is stored) or remove the installation? and 3 if I don't have a RAID relationship do I need to install RAID drivers with the installation with USB?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/need-steps-to-configure-RAID-1-in-Windows-7-OS/3ec151ee-213C-4D04-a0f4-1d8c7eb6c1f3

  It will be useful.

• Reference Dell 8700 Sound only via HDMI, no catches

  Brand new Dell 8700, I can get sound via the HDMI connection but nothing since the headset plugs or the Green and black plugs on the back of the computer.

  Control Panel - sounds I can only see NVIDIA HDMI no options, Realtek no option at all.

  I tried to install XPS - 8700_Audio_Driver_N4TKF_WN_6.0.1.7016_A00 and I get a message of failure with the newspapers say that the same version is already installed.

  I double checked the Bios and card integrated sound is enabled

  Any other ideas about how to get the integrated sound card enabled and works?

  I ran the installer of the section of the conductors:

  Audio_Realtek_WIN8.1_A00_N4TKF_Setup_ZPE

  and now I have Realtek as an option under sound and my speakers work.

• For Dell Power Edge R420 RAID management software

  We have server Dell Power Edge R420 (RAID enabled). We 4x300GB SAS hard drives on the server, but it has no application to manage the RAID for Windows Server R2 2012 So failure how could we not what HARD drive crashes.

  Hi akshay03

  There is a software called Open manage server administrator who allows you to analyze the server hardware.

  Here is a link for OMSA ver 7.3 http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r420?driverId=CWHRG&osCode=LHS64&fileId=3267736217&languageCode=EN&categoryId=SM

  Let us know how it goes.

• Dell upgrade memory 8700

  I had a dell xps 8700 comes with 8 GB of ram. Can I switch to 32 GB?

  Hi Hpsupercell

  The system can take up to 32 GB, then Yes you can upgrade.

  Concerning

• (Redirected) Upgrade Windows 10 blocked by a Dell data encryption

  I've implemented the Protection/encryption of Dell on the c: / drive of my laptop Latitude 5400 series age of 30 months, by end-2014.  I disabled this same encryption mid-2015, because it alters its overall performance for laptop too.  Encryption console shows my C: / drive now as "not provisionsed.

  Now, I tried (many times) to upgrade my OS Win 7 Pro to win 10 via Microsoft current offers "free upgrade".  However, the upgrade is blocked, each time, by encrypting data Dell, according to the report of failure of upgrade to win 10.  Doubly frustrating!  Is there a hope to solve this?  Microsoft reminds me of Dell.  Or else, I'll just sit and stay with Win 7, until this laptop is replaced later?

  Hi sm160002,

  Please repost this in the software and the operating system, Windows 10 forum help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Upgrade Dell XPS 8700 RAM or more?

  Hi all

  I'm a newbie here.

  Just try to understand the difference and value btwn completely replace my RAM by opting for a GOLD faster MHz while adding more RAM with the same (slower CHARACTERISTICS)

  Here is my PC:

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Core i7 4770 3.40 GHz 58 ° C
  HASWELL 22nm technology
  RAM
  8.00 GB Dual-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  Dell Inc. 0KWVT8 (CPU 1) 28 ° C
  Graphics
  FHX2300 (1920x1080@60Hz)
  Reference DELL 2009W (1680x1050@60Hz)
  1024MB ATI AMD Radeon HD 7570 (Dell) 55 ° C
  Storage
  223GB INTEL SSDSC2BW240A4 SCSI Disk Device (SSD) 31 ° C
  931GB Seagate ST1000DM ST1000DM003-1CH1 SCSI Disk Device (SATA) 31 ° C
  931GB Seagate ST1000DM ST1000DM003-1CH1 SCSI Disk Device (SATA) 31 ° C

  Here is my RAM:

  RAM
  Memory locations
  Total of 4 memory slots
  Used memory locations 2
  Free memory locations 2
  Memory
  Type DDR3
  Size 8192 MB
  Channels # double
  Frequency 798,1 MHz DRAM
  CASE # latency (CL) 11 clocks
  RAS # for CASE # Delay (tRCD) 11 clocks
  RAS # Precharge (tRP) 11 clocks
  Clocks of cycle Time (tRAS) 28
  Control rate (CR) 1 t
  Physical memory
  62% memory usage
  GB total physical 7.95
  GB available physical 2.99
  Total virtual 32 GB
  25 GB virtual available
  SPD
  Number of Modules SPD 2
  Slot #1
  Type DDR3
  Size 4096 MB
  Hyundai Electronics manufacturer
  Band bandwidth Max PC3-12800 (800 MHz)
  Part number HMT351U6CFR8C-PB
  Serial number 274980024
  Week/year 29 / 12
  Timing chart
  Frequency CASE # latency, RAS # for CASE # RAS # preload tRAS tRC tension
  JEDEC #1 MHz 457,1 6.0 6 6 16 22 1,500 V
  JEDEC #2 MHz 533.3 7.0 7 7 19 26 1,500 V
  JEDEC #3 MHz 609.5 8.0 8 8 22 30 1,500 V
  JEDEC #4 MHz 685,7 9.0 9 9 24 33 1500 V
  JEDEC #5 MHz 761,9 10.0 10 10 27 37 1,500 V
  JEDEC #6 MHz 800,0 11.0 11 11 28 39 1,500 V
  Slot #2

  Now, my understanding is that when the replacement of the most important identifier is the part number HMT351U6CFR8C-PB. Just do a search on this part number and you should be able to find the exact match of RAM, right?

  But what is not clear to me, is how do you find a REPLACEMENT RAM? Can I run DDR4? If I can run 1600 MHz or faster in this motherboard? What is the schedule?  Clock? This is where I get confused.

  In addition, I will not notice even a speed increase?

  

• (Redirected) For Dell Dimension 5150 Windows 10 upgrade: "there are no supported network devices.

  Hello world

  I have run the applet get Windows 10 and get the message: "there are no supported network devices.

  I use the router directly from the ethernet port, so it seems that the Dell 5150 driver for this is not Windows compatible 10, which is disappointing.

  Does anyone have a solution to this, or I'll have to just buying another cheap network card?

  Thanks in advance,

  J McVirgo.

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• (Redirected) The Dell Vostro 200 upgrade

  Hello, I'm tough in the hardware and software but also to this news.

  I recently bought a Dell Vostro 200 mini tower of Craigslist. Its running Windows 7 Ultimate edition. Here are its specs:

  Intel (r) Pentium (r) Dual CPU e2140 1.60 GHz

  2.00 GB of ram

  64-bit operating system

  the memory of disk hard 80gig and I installed a 250gig memory him

  has a graphics card Intel (r) G33/G31 Express chip on the family set

  I need advice, recently couple of my friends and I have decided to do some projects of video for you tube. I tried to download some apps, but they would not work... I want to use this desktop computer for video editing and games of causality as emulators!

  Need me a new graphics card and what is good? What kind of Ram do need me?

  looking for good performance with an economic budget

  Thank you very much for taking the time to read this and a helping hand!

  Hi AstrellaEspada,

  Please repost this in the laptop computer forum for assistance.

  http://en.community.Dell.com/support-forums/desktop/

• How to upgrade readers in my H200 RAID of larger size and SATA to SAS

  We are upgrading hard drives in our Dell Poweredge T110, equipped with a PERC-H200A and two in RAID 1 TB mirrored SATA drives. We run the Dell T110 of ESXi 5.1 version and a single Windows Server Essentials 2012 VM.

  We want to double our capacity of hard disk and the Support of Dell sold us 2 x 342-1020 (2 TB 7.2 K NL SAS, 6 G, 3.5, CB, CK) readers.

  What is the easiest way to replace the existing SATA disks in the RAID with these new disks in the same configuration and EXSi / VM / OS?

  The controller manages RAID creating the new RAID and copy the data through somehow?
  I add the new disks in a second DiskVolume and build a second (SAS) RAID and then somehow to clone or copy the original (SATA) RAID to the new then pass the boot device to the new (SAS) RAID?

  Thank you
  Dan

  It is a different scenario than what addresses this thread, but to answer your question: Yes, you can remove a 1 TB SAS drive and replace it with another drive SAS to rebuild.

• Video card and power supply upgrade - XPS 8700 (mid-2013)

  Hello

  I was considering upgrading my video card in my 8700 XPS to an AMD R9 270 to an AMD R9 290.

  I was wondering weather the power would be able to take it.

  It's a 460W power supply which I don't think will be able to manage an AMD R9 290 so I was also wondering if he could not do, where can I get a more powerful power supply? I know where to buy a lot, but I don't know if Dell, you have specific feeds of size to fit the case.

  Is it OK to buy a market after we'll tell power 650W from any manufacturer or should I buy a specific for the case.

  Thank you.

  At the very least, get a 750w power supply. This one has been reported to adapt.

• upgrade dell optiplex gx620 to vista need driver for onboard sound plz help

  dell optiplex gx620 to on-board sound card Vista upgrade is not compatible with Vista

  can anyone help with driver sound...

  The latest drivers that Dell has are for XP, they do not have Vista drivers:
  http://www.Dell.com/support/drivers/us/en/04/DriversHome/NeedProductSelection

  Vista - update drivers:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Vista - driver problem tips:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Reference Dell MD3000i add secondary RAID controller

  Service number: ADMIN NOTE: maintain the label removed by privacy policy >

  Right: OQ

  Service request: ADMIN NOTE: application number withdrawn by the service privacy policy >

  I have a MD300i in the operation that runs in mode simplex with a controller.  I would like to add a second controller and change the duplex mode for redundancy configuration, and I don't know how to properly go to this topic.    I found some documents that says to slide partially the 2nd controller and run a SMcli command to switch to the duplex mode, followed by:

  ' Add a new connection from management to the MDSM with the following command:

  SMcli 192.168.128.102-c ' setting ethernetPort [1] ipAddress = 10.37.121.54.

  gatewayIPAddress 10.37.112.1 = subnetMask = 255.255.240.0 ";

  Where the address IP 192.168.128.102 is the current IP address of the new controller, and 10.37.121.54 is the

  desired address.

  What happens if I do not know the address on the new controller?

  I would be grateful any documentation or the help that could lead me to my solution.  Thank you for your time.

  Chris

  Hello Chris,

  Here is a link to the document to upgrade your MD3000i on the way you will need to add the second controller. http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_user's%20guide5_en-us.pdf

  Please let us know if you have any other questions.

• (Redirected) Upgrade to Windows 10, sleep problems

  I have sleep problems and stop once I've upgraded to Windows 10, the Dell Studio XPS 8100 won't go to sleep. The screen turns off, but the power LED remains lit and fan as well.

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.