Redirect USB driver...

Similar Questions

• Redirect USB error

  Good evening everyone,

  My brain always seems to be in holiday standby mode. We try to redirect some drive Flash USB devices in VMWare View connection. When clicking on the device to "Connect USB Device" drop down, we get an error message saying "an error occurred the USB connection to your desktop" there is nothing to work with in the VMWare View Client log on the physical machine. USB connections are enabled on the view connection server.

  So I am very confused...

  Thank you!

  This has proved to be the question:

  http://KB.VMware.com/kb/2051801

  Workaround in the article was not 100% correct. I had to remove the Hub USB VMWare devices from the Device Manager and the drivers from the system32 location. Before running a repair on the view Agent 5.2.

  Then things seem to be much happier.

• See 5.2 - sysprep breaks redirect USB

  Just a quick note in case no matter who else goes through.

  My clone related (Windows 7 Pro 64-bit) deployment process looks like this:

  Install/update applications that I need on my main image (the virtual machine is not joined to the domain)

  The VMware tools update and the Client to display for the new versions

  The machine for a new virtual machine clone

  Run sysprep on the clone (mainly to get the admin profile copied into the default profile for new users - the 'right' way to do it under Windows 7)

  Join the clone to the domain and log in to get GP to run (adds printers, ScriptLogic agent etc.)

  Stop the clone, snap it and use it as my base image to deploy my clones (using quickprep)

  Everything good, work great for a year and then I've upgraded to 5.2. As soon as I did it, redirect USB stopped working. VMware USB devices in Device Manager show 'work' and there is no errors will connect to the event. In the view of a zero client logs customer, I see this:

  28/03/2013, 07:06:29.688 > RC LVL:2: 0 SOFT_USB: usb_urboip_process_plugin2: connection of device USB\Vid_013fd & Pid_0842 (device_handle 0 x 00000403)

  28/03/2013, 07:06:29.688 > RC LVL:1: 0 SOFT_USB: VHUBLIB (error): doesn't have a handful of device virtual plugin: 01013CC8, error: 0 x 1

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_winif_vhublib_plugin_complete_cback: deferred plugin failed (9)! (device_handle 0 x 00000403)

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_winif_plugin2: Vhublib_PluginDevice failed (9)

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_process_rx_buffer: PLUGIN2 treatment failure

  Thought it might have been a failed upgrade to view customer, so I went back to my master (non-Sysprep image) and re-directed the View Client installation. Any help - deployed again and still no USB. A decided to eliminate some steps and published my master (non-Sysprep) machine in a manual pool. Connected by a zero client and USB worked.

  To make a long story - and four hours on the phone with VMware support - shorter, looks that sysprep breaks USB redirection with the 5.2 client. We don't know why, but if I reinstall or repair the Client View after you run sysprep, it is fixed. I have a file of unattended installation of dead-simple sysprep that adds two or three user accounts, tells sysprep to copy the admin profile the default profile, sets the language and license keys, and that's all. Nothing for devices (no new analysis full PnP), just a "generalize" and "/ oobe" on the command line. But even with these settings simple redirection failure.

  Support will try to repro the problem in the lab, but I thought I'd post it here in case someone else is going through the question.

  Geoff

  Hi Geoff

  We saw some people with similar problems. We believe that there may be a problem when the upgrade is made of an earlier view. In your original post you mention:

  "If I reinstall or repair the Client View after you run sysprep, it is fixed. Did you reinstall/repair the agent rather than the customer? All the problems that we have investigated were caused by agent side issues rather than the client's problems.

  I was wondering if you could try something to see if that fixes the problem.

  After you get your agent to the required version of view, but before performing the operation of sysPrep. Please first confirm that the agent works for USB redirection. In order to solve the problem, you are facing here are one of 2 ways to do this. One way works for some people, and another works for others. Would appreciate feedback on your results.

  before the command sysPrep but confirmed USB redirection works;

  Method 1: (which does not work for some, not all)

  1. go to Device Manager and remove the 'VMWare View virtual USB Hub' device.

  2. right click in the Device Manager and look for changes on the hardware. This should re - install the latest version of the driver vhub.

  3. restart the agent

  Check now if USB still works and try again your sysPrep as before.

  Method 2: (once again before the sysPrep operation)

  1 find the machine for "vmwvhub.sys." There are several versions found, including C:\Windows\System32\drivers\ and c:\Windows\System32\DriverStore\FileRepository. The version stored in C:\Program VMware View\Agent\bin\drivers\should be the latest version for your installation of the agent. (probably 5.5.0 xxxx)

  2 remove instances of these files that have one version other than the most recent 5.5.0 build-949580. The former display drivers will probably be a version 5.1.0 build-668184.

  3. now restart and confirm functions yet USB. The driver loaded in Device Manager must be a 5.5.0.

  Now try the operation of sysPrep.

  Let me know if one or the other of these work for you,

  Kind regards

  Peter Brown

• How can I migrate a time machine backup external USB drive to time capsule

  Searched the forums and can't seem to find an answer. With the help of El Capitan 10.11.6. You want to transfer backups Time Machine 4 years on an external USB drive on my new Time Capsule. Any ideas would be MUCH appreciated.

  There is no official method because it has problems.

  There's no official way.

  Here see Q18. http://pondini.org/TM/FAQ.html

  We recommend that people not me there. It has not proven reliable long-term. Start a new backup on the TC and keep the USB stick in the form of archive. After a few months or a year you won't have it.

  You have to understand the Time Machine backup otherwise locally the CF network. It is easy enough to move the backup network local but much harder the other way around.

• How can I make an external USB drive read-only?

  I'm trying to find a solution to take a USB HD in a spacing classified environment / air.  If I can make the drive read-only (like I gave him that I need to copy on these machines), then the Agency will probably approve the device.  I can't use DVDs that data are 30 + GB in size.

  Hey there, capsfanva!

  Welcome to the communities of Apple Support! It seems you need to set permissions on an external USB drive or hard drive. These permissions setting is a great way to improve the security and privacy of these elements. You've come to the right place and you will find the answer below. You must connect the device to your computer and follow these steps:

  Set permissions for the items on your Mac OS X El Capitan:

  See you soon!

• Display a dialog box after the ejection of a USB drive, saying the car was ejected

  Hi, would someone please tell me how to change the applescript below to eject my USB in 2 ways, either by waiting 30 seconds by pressing the button "YES". Then, once the disc has been ejected another dialog box would appear to say 'eject disk '. If 'NO' button has been activated the reader wouldn't be ejected. My USB is indicated as (the present book).  Thanks in advance for any help.

                                                              tell application 'Finder '.

  display the dialog box "Eject USB drive?" default button 1 with the title "Eject?" buttons {'yes', 'No'} give up after 30

  If the button returned of the result is 'yes' then ejection of the this book

  tell the end

  Here:

  Tell application "Finder".

  Display dialog "Eject USB Drive?" buttons {"Yes", "No"} default button 1 with the title "Eject?" give up after 3

  If the result back button is 'yes' or abandoned then of the result

  This book of ejection

  display the dialog box 'Disc ejected.'

  end if

  tell the end

  (143586)

• Move backup by USB-drive to Time Capsule

  I used to make with Time Machine backups on an external USB drive. Now, I would like to move these old backups to my new Time Capsule.

  Is this possible? And how do I do it?

  Thank you

  Click here and follow the instructions.

  (143017)

• Cannot share the SD as usb drive

  I'm under 1.1 on a fire of Alcatel filed. I enabled two options to share the sd card (which works fine) as a usb drive, but it does not recognize my computer (Debian). When I connect the phone, it creates an sdb entry in / dev, but without partition (sdb1).

  So far, the only way to achieve this is by issuing the command described here (http://yorik.uncreated.net/guestblog.php?2014=15), "Adding access usb to SD card" > step 5. I do whenever I plug in the phone, of course.

  Additional information:
  -The sd card works fine. I can use it on the computer with a microsd card.
  -The sd card works fine on the phone too.
  -J' have enabled usb drive and shared the sd card in the phone.
  -The page I linked indicates the partition should appear when I unlock the home screen, I have tried that but it still does not work.

  This has been resolved for me in rev version 1.1.0.0 01020.

• USB drive will not appear in the finder, but is OK in disk utility

  My "music backup" external USB 1 TB SSD showed in the Finder, until a few days ago, when he disappeared. I tried dismantling and Assembly of the command line. The said command-line editing is successful, but I still don't see the drive in Finder.

  If I go into disk utility "First aid" reports no problem. The drive is formatted for OS X.  If I right click and say "Open in the Finder" I can see all the folders and even drag in the sidebar where they work, even after a reboot. I can't see the drive at a higher level.

  How can I fix it? I guess a solution would be to create a folder called "Music disc" and then move all files on the disc in it and then put it on the sidebar, but it seems silly. How can I get my hard drive appears again in the finder.

  PS Si I use a third-party file manager, such as ordering a PRO, the USB drive is available for selection in the drop-down list of disks attached.

  Help!

  The Finder, choose utilities go to menu, open the Script Editor and run:

  the shell script ' chflags nohidden ' / Volumes/VolumeName /'.

  put the name of the drive where is VolumeName.

  (142676)

• Super USB Drive - need to make a CD

  Just bought a Super USB Drive and the need to take a .wav file and put it on a CD to make it work in any CD player. So far, no luck. Simple instructions, please, I need to get the CD done immediately to a contest.  Thank you!

  You need to create a music CD.  To do this the .wav file in iTune import and convert it to .mp3.

  

  Then select the mp3 file and create a new playlist from it:

  

  Finally, burn the playlist to disk:

  

  

• How to set ff to access RoboForm-to-Go connected USB drive?

  I have roboForm-2-Go on the USB drive. Firefox is not see it.

  Have you tried to obtain the support of Roboform?

  I do not use Roboform myself, but I suspect that some sort of add-on might be installed for Firefox to access the data stored on the USB key.

• El Capitan - Ext. USB Drive not mounting

  Since the upgrade to El Capitan, I have not been able to access my external USB drive. I read the other posts about this problem and none of their solutions worked for me. Through repeated trial and error, I came across a solution that allowed me to access my USB drive in El Capitan. By attaching a USB hub to USB port and your device your drive should become accessible. Depending on what type of car you join you may need a powered hub. I enclose a mSATA drive to a hub powered and well.

  Hi Bob, there.

  Looks like you're having connect your USB drive to a hub so that it works with your computer. I would reset your PRAM then your SMC in this order:

  How to reset the NVRAM on your Mac.

  Then:

  Reset the management system (SCM) controller on your Mac.

  If the problem persists after that I have would then start in safe mode to clear some system-level caches and perform a disk check and repair if necessary:

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  Once you log in safe mode, reboot normally and try again the reader. Thank you for using communities of Apple Support, let us know how it goes.

• Apple iPhone 4S for windows 8.1 usb driver

  Apple iPhone 4S no usb driver for windows 8.1

  Hello syap_pop,

  It seems that you have the driver installed on Windows 8.1 for iOS devices. Use this section of the following article:

  If iTunes does not recognize your iPhone, iPad, or iPod

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  Thank you for using communities of Apple Support.

• How to download an application on the USB drive and install it then from there?

  I want to download an app from itunes store from a windows computer, save on the USB drive and then install on my iPad. Please gibve me a hint weather it is possible. Thank you!

  No, it isn't. Live or through iTunes only.

• satellite A30 404 USB driver

  Hello
  After you have installed Windows Xp Pro I get a problem with my usb driver. It is not possible to install it.

  What can I do whit it?

  Hello
  you use Windows without a service pack?

  Never mind. I found an article on this topic in the Microsoft Knowledgebase. Sound called "USB does not initialize at startup or Windows XP".

  Read the Article ID: 830957

  Good bye