(Redirected) 530-s does not start after power failure

Similar Questions

• Vista does not start after power failure

  It is a Dell Inspiron 1525 with Vista 32 - bit, recently replaced hard drive

  My daughter has been using the computer and the power failed due to low battery.  Now, the computer does not start normally and not all programs will run.

  If I choose "safe mode", it hangs on crcdisk
  If I choose 'window start normally' it crashes to the screen of Microsoft Corporation
  If I choose "last known good configuration" then it seems to start normally, but does not all programs run.

  I tried to boot from the OS disk, but it ignores the entire disk
  I tried to run the installation disk once the computer is running, but it freezes.

  Need solutions.  Thank you.

  Hello Bakajanaidesu,

  Thank you for posting.  It seems that you have a hardware error or failure with your hard drive.  In this case, I recommend that you contact your Dell technical support for more information on how to correct this problem.

  Please let me know if I can be more useful. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell R710 does not start after power failure

  Hello, I tried to find answers on the forum but nothing so far

  I have this R710 at home that I use as a media server, it was working fine before a power outage the other night (no I don't have a UPS :-(

  When the power returned, I noticed one of lighting power supply has been turned off, so I took it out of the unit, but the unit still won't turn.

  I still have a so-called good food because the small green LED on the motherboard lights, and I can access the iDRAC, this feature, I didn't before the net Searchin' for answers, I'm kind of a novice with the servers.

  When I access the iDRAC, on the power supply page, I see nothing, no power supply listed.

  Is it possible that a diet might be "half bad", enough to work the emergency circuits but not the power outlet?

  Symptoms:

  Camera lights.

  Can access the functions of the Idrac, but doesn't do anything if I try to activate it via the tasks "quick launch".

  Power supplies are not visible on the pages of the Idrac.

  Display before work.

  Server was very well just before a power failure which took one of the PSU

  The remaining 870 PSU has the green light on, and the fan works for 2 seconds every time I cut the power it.

  Thanks for any help.

  OK, well... no answers.

  I found a place locally that sold a diet so I arrived with my server, I told them I would buy the power supply that I confirm that the fault was in fact the power supply.

  Well, you know, the unit started correctly with the new power supply, now in IDRAC, I see both power supplies but on that faulty, he reads "present, entry lost.

  So the answer is YES, a power supply may be defective, even if the green light is on.

• Windows XP SP3 does not start after power failure

  I've known a sequence of power failure while my computer was on. When the power was restored, I couldn't boot into Windows. Windows stops before loading the Welcome screen and hangs. I tried in "Safe Mode" and "Restore Point", but always impossible to load up to 'user account screen '. I am running XP SP3.

  I tried recovery of original windows CD. No joy. I ran chkdsk with the option/r several times and fixboot as well, without success. Help, please!

  Just type fixmbr at the command prompt in Recovery Console.

  For more details, see http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_fixmbr.mspx?mfr=true

  Also http://helpdeskgeek.com/how-to/fix-mbr-xp-vista/

• does not start after power failure

  Here is what the screen shows

  File\windows\system32\drivers\aswvmm.sys
  Status: 0xc000000d
  Info: windows has no bread because a crytical system driver is missing or damaged

  I cannot drive vista or files by e-mail and will put on a flash drive or disc thank you

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Most manufacturers have more available Vista recovery disks, but you may be lucky with your manufacturer.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Help with Vista Home Premium. PC does not START after power went out. I tried to reinstall the CD without success, I can get to the screen that says "keyboard failure".

  I turn on my PC after a power failure and a black as BACKdisplay of KEYBOARD FAILURE.the USB ports have the power, the keyboard works, but I can't seem to BOOT without a keyboard menu. If anyone has any idea I'd be grateful! Stu

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1e228424-E520-4ec5-AF99-252a6e645f75/
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Photosmart HP 6510 B211a works does not properly after power failure

  Hi guys,.

  I'm new to this forum, but I hope someone can help me.

  I have a HP all in one Photosmart B211a 6510, which worked like a dream, since I had last winter. We had an unexpected outage yesterday however and once the power came back, the printer insists on the fact that there is no ink in the system. I fear the worst and believe that his brain can be somewhat blurred.

  I have two of your ink cartridges replaced last week with genuine HP ones and everything was fine. My ink level is almost low on the other two, but I have not replaced these yet because it is not necessary.

  Once the power came back, the printer informed me that the magenta ink was 'missing or damaged '. I removed the cartridge, cleaned with distilled water and dry. Once replaced, the printer has changed his mind and told me all the ink cartridges are now 'missing or damaged '. When I opened the printer again, the transport of ink is automatically did not move as usual to allow me to change or remove the cartridges.

  More the touch screen of the printer does not allow me to leave this error message or perform any other function such as cleaning the heads. I tried a soft reset and hard reset, but this proved unsuccessful.

  He's tired? Should I just throw it and head to the stores again?

  Thanks for reading this,

  Fatiha

  Hi rich,

  I replaced the cartridge magenta yesterday and my printer works successfully again! Woohoo!

  My father, an electrician, so between us we have come to the conclusion that when the power came back after the crash there was an electric pick or insufficient tension than normal and this has damaged the chip of the nearest power - the magenta cartridge ink.

  All is well again in any case.

  Thanks for your help - I appreciate it

• ESXi 3.5 does not start after the failure of the card mother SATA port 0.

  I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

  My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

  Todd L.

  Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

  Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

• Computer does not start after power surge

  My laptop is not able to restart after a cocoralie energy cut. Safe mode request a CD of Installation, but I don't have it. I have just my product key of Windows Vista Home Premium OEM law. What can I do?  I tried to get help from the Microsoft page, but they ask a number of identification, all I have my product key, but seems it is not the same... Help!  I fear for my files.

  If vista was preinstalled, you are not free Support Ms.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this remedy:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• computer does not start after power surge get to message x 300 128 MB BIOS

  I had a power surge of the House with the computer when I restarted I got a black screen with a 300 x is 128 MB bios p/n 113-a33406-100

  under that top left, a blinking cursor try don't reboot with pf8 no help

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the last splash screen that is displayed, until you get the error message?

  ·         Were there recent changes made on the computer before the show?

  Please give us more information on this. Also, disconnect any external devices (printers, USB Hub, drives external, etc.) and try to start.

  Error-PC x 300 and 128 MB BIOS p/n 113-A33406-100 is linked to the Dell computer. If so, I suggest you to contact the Support Dell about this issue and check. You may experience this problem if the BIOS is damaged.

• Pavilion dm4-1160us does not start after the failure of system recovery

  I have Windows 7 Home edition is installed. In my view, it is 64-bit.

  I get everything by initializing the error message is:

  "BOOTMGR is missing".

  Press Ctrl + Alt + Delete to restart»

  When running various tests (Tuneup, break-in, Start-up, hard drive) in I always get the same failure ID: M4PC2J-5KQ6N0-XD6V41-60VG03. The poduct ID is XH124UA #ABA.

  The case began after my computer froze and I forced the reboot.

  I guess that the hard drive is a gonner. Is this correct?

  Hi Mario,.

  Personally, I recommend to replace the hard drive yourself - it is a surprisingly simple process (and much cheaper).  A brief guide on this is detailed below.

  Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 61 of your & Maintenance Guide.

  Once this is done, simply use your recovery media to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery media, let me know because there is another option, you can use it as long as you can clearly read the activation of 25-character product key on your label COST.

  Best regards

  DP - K

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye