Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

Similar Questions

• Cisco 526 Wireless Express Mobility Controller supports AIR-LAP1140N?

  Does anyone know if Cisco 526 Wireless Express Mobility Controller supports the AIP-LAP-1140N Access Points?

  This isn't. The WLC526 supports only the AP521.

  HTH,

  Steve

• Cisco 526 Wireless Express Mobility Controller

  We just bought to UC520, 526 and a LAP521 controller. We got the UC520 upward and running in 15 minutes, but the 526 does not include a lot of documentation. Can not have find the 521 AP on the network nor will it set the layer mode 2. I don't want to configure routing for a 4 Office of PC couche3. During installation, the only option it gives is layer 3 and the documentation says it will make layer 2? Can someone give me any assistance?

  First of all, set up like you would a 4400 WLC or 2106. I will attach the link configuration guide here for you.

  http://www.Cisco.com/en/us/docs/wireless/controller/4.1/Configuration/Guide/ccfig41.html

  Many of the advanced features are disabled on the 526 but you set up substantially the same.

  Dennis

• Configuration Cisco AP 2600 (AIR-CAP2602I-E-K9) and Cisco 2500 wireless controller?

  This is the first time that I work with this type of devices (Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500)... my experience to the CCNP (router and Switch)

  How configuration Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500?

  Please find attachment (Cisco device map)

  

  Hello

  Here are the docs for you to configure the Basic for AP switch port configuration IE 2600 s and wlc.

  WLC port must be configured as a trunk.

  Port of the AP must be access.

  CAP2600 series requires software 7.2.110.0 wlc minimum (make sure you have it or above release)

  Upgrade if you follow it.

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

  1. http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml (SW port configs)

  2. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

  (Another thing very importand, discovery mechanism, choose properly)

  If you choose the option dhcp 43, it uses the TLV format. Type is always f1, the length is 4 * (wlc number for which you want to provide discovery for, in your case) Value = Hex conversion of the wlc management ip address.

  A video for the process of

  http://www.youtube.com/watch?v=oOh_Iv1CHxQ.

  Thank you

  Sahil

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• 2504 versus 3850 wireless controller

  We are just beginning to look at wireless on our secure networks. We have a 2504 and some WAP 36xx but never installed. We also ordered a couple of 38xx WAP and group the 3850 templates which included the wireless controller. We plan use our Cisco ACS with CERT and AD for authentication.

  We're finally going wireless at several sites of fiber attached if cela pans.

  To save time by going down the wrong path, I have some basic questions to ask.

  My questions are... what (2504 versus 3850 WC) approach is better?   I know the 3850 series may have mulitgibit connections to WAP with the newest 3850 model x, which can be a more thereafter. I also don't know the process of how data is placed the user wireless via the WAP to the local network. Data must tunnel through a tunnel of IPSEC for the 2504 and then placed on the local network to the location of 2504?  Or is this just tunnel for authentication and wired LAN between WAP and switch allows direct data flow?   We have a few wireless on our network, but we use a totally different method.

  What bothers me is that if there is a certain wireless access to a corporate network and servers I think 1 GB for the WAP connection could be a bootleneck... esp if the data can not be placed right on the local network to the WAP connection to the switch.

  A 3850W model controls the only devices on the local stack or it may go beyond this restriction too? I mean, it's can support 3850W THAT connected to another WAP stack too?

  I would not use the 3850 unless your environment is weak, that being said, the 3850 and the AP must be on 3850 or 3650 in your environment. I'd go with the 2504 his stable and you will not regret it :)

  -Scott

  Please evaluate the useful messages *.

• How to know ULTIMATE HORIPAD game wireless controller have full powers?

  How to know ULTIMATE HORIPAD game wireless controller have full powers? It works very well, the only thing is, I have 3 hours of charging with the USB lighting power cable, the cable is working fine, but the led on the controller always alone on (the first). supposed to be four lights right? It of my first game controller, just bought today, so I don't know how my game controller something bad or something do not know how to look.

  Please help me

  ULTIMATE HORIPAD game controller

  There isn't really anything to do with Apple TV, but I'll try to help

  There are 4 LEDs on the controller?

  The manual for controller tells how long it takes to fully charge?

  Have you tried to load all night?

• Where is the serial number Xbox 360 Wireless Controller?

  Where can I fint Xbox 360 Wireless Controller serial number?

  Hello

  Click on the link and see if it helps.

  How to find the Xbox product serial numbers

  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/serial-number

  You can also contact Xbox support.

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

• Xbox wireless controller not connecting with PC, please help

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Hello

  Setting up Windows Media Center

  To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

  ·         Windows 7 Home Premium or full, professional edition

  ·         Windows Vista Ultimate or Home Premium

  ·         Windows XP Media Center Edition 2005

  Step 1: Get the key Setup of Xbox 360

  1. on your console, go to My Xbox , and then select Windows Media Center.

  2. follow the on-screen instructions.

  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer

  1. start Windows Media Center.

  2. click on tasks, and then click add Extender.

  3. When prompted, enter Xbox 360 8-digit setup key.

  4. complete the configuration of the Extender

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Xbox 360 Wireless Controller is compitable with Windows?

  Hey, I have a question, does the Xbox 360 Wireless controller compitable with Windows too?

  Please help me.

  Hi Destinyhope,

  Yes. Xbox 360 wireless controller is compatible with Microsoft Windows.
  For more information and assistance on the Xbox 360 wireless controller, click on here.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Battery wireless controller

  OK, I admit, I am not too clear, but this is the first time that I have been unable to figure out how to install a battery. I just got a camcorder VIXIA HF G30 and was beaten by the wireless controller battery compartment. No matter what I try, I can't get access to insert the battery. You would be grateful for the help, thanks.  Ted

  Hello tevans9129,

  The WL - D89 uses a CR2025 button-type battery.  It is located behind the battery tray which slides down.  To open, hold the remote in the right hand (covered on his back) and hang the nail of your left index finger in the small lot, which acts as a spring and pull toward you.  At the same time, use your right thumb nail to pull down the battery broke.  This will allow you to change the battery.

• 6030a HP MFP: HP Wireless Controller (map) pcb for HP 6030 has

  Can I install

  HP Wireless Controller (PCB) on a HP 6030 MFP printer?

  If Yes, what would the model/serial number please

  Stephen is correct.  See the link below this map works with your printer.

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3662193.PDF

• You can use wireless controller if you use Plug-and-play?

  Hello, I was wondering, is it possible to use a wireless controller with my pc, if I use a plug and play?

  If the wireless controller is equipped with a usb port on the computer to connect to it, then it is probably intended for use on the PC. You can't just use a PS3 or Xbox controller on the computer just like that.

• Xbox 360 wireless controller is not connecting with receiver and pc

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Cisco 1250 and AIR-ANT5959

  Hi all

  Ordering Guide 1250 Cisco indicates that AIR-ANT5959 can be used for 2.4 radio concert.

  1250 AP provides 3 connectors for dipole antennas but AIR-ANT5959 spec indicates that it comes with 2 BNC connectors. Are that we assume a dipole to stick on the rest connector? If this is the case, how can we identify which is the TX and RX, you can connect the AIR-ANT5959 to the respective radio without the performance impact? Any help much appreciated.

  see you soon,

  Andrée

  Hi Jean Miche,.

  The connectors on the side of the 1250 are the connectors of the transmission. Then, left and right. Way is not to ' receive '.

  So if you want to connect a 2 antenna connectors like the 5959, you need to plug it into the connectors on the left and right (the order is not important).

  Be aware that you lose the ability MIMO antenna being diversity and no MIMO.

  So for the IOS ap, you need to configure "antenna diversity of transmission" and "antenna receive diversity". That will prevent your 11n rate but works perfectly.

  WLC APs can be the same configured in the configuration of the AP WLC. You simply specify what a diversity antenan plugged into left/right only.

  Connecting a different antenna on intermediate connector would be a mistake because 3 antennas is used only in the case of MIMO and you cannot reach with a diversity antenna MIMO + another antenna on the middle connector.

  I hoep this helps, s

  Nicolas

  ===

  Please note the answers that will help you