(Redirected) Aurora video R3 update

I'm going through 2 x gts450 to one card. But I don't know which is the highest card that I can use?

Best of this post in the Alienware owners Club Forum, here:

http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

Bev.

Tags: Dell Desktop

Similar Questions

  • Problem with the formats video pro update 2.0.4

    Hello

    I have a problem with FCPX that appeared after I installed that formats video pro update 2.0.4 (very probably related to this update because had no problem before it). Final assembly runs very slowly and when I try to quit smoking I get a message that says 'Cancellation tasks background' with a progress bar that never begins. I opened the window of background tasks and there is no background running task. Only force leaving the application closes.

    System specs are:

    FCPX version 10.1.4

    Mavericks OSX version 10.9.5

    MacBook Pro 15 "in early 2011, intel core i7 at 2 GHz, 8 GB of RAM"

    Any help would be massively appreciated! Thank you

    Start by removing the preferences. Press the command and option keys at startup and confirm.

  • (Redirected) Aurora 4 updated BIOS update now does not start

    Hi all, I just formatted my PC installed fresh Windows 8.1. Downloaded the Aurora Panel and then noticed that there was a Bios Update recommended A3 to A11.

    He told me that I had to switch to A5 first, so I downloaded and it installed fine self. It was then restarted and since then his do nothing.

    No beeps, no display just the fans inside the base unit turning speed hyper and generally strong

    I left for 30 minutes and still made no difference.

    After that, I unplugged everything from the back of the pc. tried again and he still didn't fight with the fans care.

    Scratched inside the base unit and also tried to clear the CMOS and removed the battery and still no boot and load fans

    Is that all you guys you suggest I can do?

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • (Redirected) Aurora R4 CPU Fan problem (command center)?

    My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

    I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

    My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Can't see the imdb videos after updating to firefox 39.0

    After updating firefox 39, I can't see videos online in some websites like imdb, marca.com, etc. Only works on youtube.
    I disabled Adblock and noscript, but continue the error.

    It's embarrassing, I just restart computer and all start work very well, I didn't remember the last time I have shut down or restart my pc, so it's all...

  • I get a message on the video player update. What is going on? Why do I need this? Prove that I do - too much virus there for just downloading something

    A page keeps popping up saying THAT FIREFOX wants me to download this video player. I am wary of download anything these days by the virus software out there

    If you receive a message pop up asking to update or install other software, then such a message is probably a scam and you should never respond to such reporting to avoid being infected by malware.

    You should only update Firefox via "> about" or by downloading and installing Firefox from Mozilla and server never using a popup or a link on a web page.

  • Satellite L30 - question video card update

    Hey guys!

    I have a Toshiba Satellite L30-113 and I am very happy with the way it looks and works. I managed to update the 3 GB RAM, the processor is in a pretty good shape, although it is only 1.7 GHz.

    Now, my only problem is that the video card, the laptop is equipped with (ATI Radeon XPRESS 200 M) is quite low. You have an idea on which other (preferably better) video cards is compatible with the Satellite L30 - 113 default installation?

    Thank you!

    Speaking of GPU Generly cannot be upgraded on laptops. Due to the specific design and cooling with limited cooling performance, it cannot be done.

    Check please - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  • Pavilion 9220y video card update

    Hello
    I was hoping that an expert can help me upgrade/configure a new video card for a desktop HP Pavilion Elite 9220y.

    I have done the research to shed light on the issue, but would REALLY appreciate some help!

    So just that the machine has now integrated ATI Radeon HD 4350 - that it comes with, who I am is of course very well for the casual user, but I want a massive update to play new games.  Unfortunately, I'm stuck with this computer, so I can't build a new machine custom, so I just want to update my video card today... the rest of the system works very well if.

    My questions are:

    • Can I upgrade the video card on this specific computer HP Pavillion 9220y?
    • I read that I can replace the card using the PCIex16 slot? but is this slot PCI-E 1.0 or 2.0?  I could not find in the sheets...
    • If so, what kind of cards are compatible with it and are good for games?
    • I buy a power supply additionanl to run the additional power demand?  If so, what is a good thing that will work for the 9220y? http://www.Newegg.com/store/subcategory.aspx?subcategory=58&name=power-supplies

    It's just a lot to wrap around my head and I want to make sure I go about it the right way, before you update or buy anything!
    Again, any help would be appreciated more
    Steve

    Hi Steve,.

    1. Yes, you can install a video card in your PC.

    2. the discrete graphics card will move into the slot PCI-E x 16.  HP is not posting slot PCI-E card, but a video designed to the 2.0 PCI card will normally be backward compatible with the PCI 1.x ports.

    3 game cards have different levels of performance and your choice will depend on the game being used and set of parameters. Check out forum and the game manufacturer's web site and see what others are using.

    4. more decent video cards will require a bigger power supply.  The p9220y has only a 300 Watt power supply.

    Here are the specifications of the motherboardfor the p9220y. Since most of the better video cards are wider than normal single slot card, then adjacent locations on the PCI-E x 16 slot must be vacant.

    I make a few suggestions, but I'm really in the dark about your playing conditions.

    TheCorsair CX600should have enough power for most video cards.

    TheNVIDIA GTX 550 TIshould have enough power for most video games with the higher settings. Screen resolution is a factor of performance.

    You need to open your PC and measure the physical dimensions of your diet.  Here is a list of the things to consider:

    1. Specifications
    2. Total power - important
    3. amperage 12 + v - important
    4. Modular - is not required, but I like the flexibility
    5. Warranty
    6. I7 and SLI ready
    7. Efficiency rating
    8. Cost
    9. The physical size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
    10. Only one + 12 volt rail is a better choice.

    www.Newegg.com has many choices of power supplies.  Corsair, OCZ, Rosewill, Thermaltake...

    Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.

    How to replace a power supply.

    How to replace a video card.

  • envy phoneix 810-430qe: power supply for video card updates

    Hello

    I thought of updating my video to the titan x nvidia card was but want to know if there is no limit as mother board power CAP or any big problems so I decided to upgrafe

    Hello

    > please do chk the requirement for the graphics card that you want to install

    > If she argues well and good, otherwise you might need to chk with different card

    > chk your product on hp.com

    I work on behalf of HP
    Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.
    Click the right to say 'Thank you' for helping on Bravo 'Thumbs Up'!

    I am an employee of HP

  • HP 625 video card update

    Hello

    I would like to know if I can update/change my video card on my HP 625 model

    Hello:

    N °

    The video chip is part of the motherboard and the entire motherboard must be replaced by another which has better graphics (if any).

    The attendant costs for doing such a thing would exceed the cost of buying a new laptop with the desired video solution.

  • Aspire the XC-605 video card update

    Hi all

    I recently bought an Aspire XC-605 and I need help, so I hope you guys can help out me. It comes with an integrated only video card. I wanted to update the graphs so I bought a card Asus HD 6450 Silent PCIe. I installed the card and booted the computer and nothing appears on the screen any card (Asus or integrated) I plug the HDMI cable.

    Do not know how to proceed at this point. I went into the BIOS to see if I could disable the onboard graphics, but there is no other choice. I think that maybe it's a power issue? I don't know anything about power supplies, but certainly one that comes with the system is not standard size.

    Can someone point me in the right direction?

    Thanks for your help!

    Hi pchandra

    The video card you have is a low power card - it needs about 75 watts and draws its power from the PCIe slot, so your XC-605 feeding should be enough.

    There may be a problem with the graphics card. I suggest to try the card in another PC to rule out a problem with it. If it does not work in the second PC, the card will be replaced.

    If there is no setting in the BIOS, it adjusts automatically, usually the output, so if you insert a card, it will default to it. Similarly, if you delete it, it should default to the integrated graphics card.

    Try the card in another PC and let us know how you get on...

  • CTO G42T-200 video card update

    Is it possible to update Intel integrated graphics of my HP G42T-200 CTO Notebook PC with a Nvidia card?

    Hello:

    Although it is possible, it is not practical, as the motherboard needs to be replaced by another one with separate video.

    It would cost several hundred dollars just for parties (new motherboard, different fan/radiator).

  • a video driver update

    What is the procedure to update a video driver, how I would do it

    Hi LauraKiblinger,

    There are two ways to update the driver of the video card in the computer.

    • Windows update can automatically update the video card driver.
    • Download and install the updated drivers from manually video card manufacturer's website.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • more recent good video driver updates for M4600 with ATI M5950 video card

    My hard drive has failed recently and I had to reinstall from scratch. I used it for a few months now without other problems.

    Currently, I am having a problem where a program (formZ) modeling in 3d displays wired but no polys in its modes of rendering opengl. I had this problem in July 2014 and it is resolved by updating my drivers which was available on the website of dell at this time. I have also some odd polys displaced and shadow flicker in sketchup which I didn't have before.

    According to me, it's my drivers, but the most recent driver available for the m5950 on the m4600 has 'changed' in October 2013 and when I install it, the problem is not resolved.

    Someone at - it a newer driver that 8.850.7.8000 (as of 12/19/2011)?

    Well yes that suits him.

    Although not quite, the link that you sent me was for certifications of driver for specific programs and some video cards, not including mine. However, I could find what I needed on the site of AMD:

    http://support.AMD.com/en-us/KB-articles/pages/workstation-graphics-drivers.aspx

  • Studio XPS 9100 video card update

    Hello

    I currently own a Studio XPS 9100, I am looking to update my video to a Nvidia GTX 660 card. My first choice of the map would be the GIGABYTE GV-N660OC-2GD, but I am concerned about cooling in my case, since it's a map outdoors. The card that's in there now is the Radeon HD 5770 standard with a closed around the map case. I know the case of XPS 9100 doesn't have a lot of fans and I wonder if I'd be better off getting a card with a case like the one that is there now, those who are better for internal cooling cases or are the two models of cards very well to use this system without modification?

    This card should work, but as you said would be throwing air hot back on the case and may not be the best for a stock case, unless you upgraded your fans or have a power supply that can compensate for the extra heat.  Should work well.   If you keep your machine in a well-ventilated vs in a Cabinet, you should be ok.

    If not, opt for one of these reference maps which has the shroud designed to channel air on the back of the card,

Maybe you are looking for

  • Satellite C660 - I'm looking for a MBR

    Hi all I fell my MBR against a standard MBR.You have a MBR C660 so I found the recovery? Thanks in advance :)

  • Qosmio F50 how to disable external sound using headphones

    Hello Just a quick question. Does anyone know how can I disable the sound of my Qosmio F50 external when I use headphones? Now when I plug in my headset to use Skype or listening to music, the sound still explosions out in the room. I can't understan

  • c0000013 parameters 75b6bf7c 4 75b6b7c 75b6bf7c

    Why this type of message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c comes on opening my computer

  • How to make a copy of windows 7 for my laptop

    I have a HP Pavilion Entertainment PC with windows 7. If I need to reload the OS on the pc, where can I get windows 7 to go because I don't have a cd/dvd with the operating system, when I bought the machine. I can make a cd... If Yes, where can I get

  • 4.2 ACS running on Windows 2008 Server 32-bit?

    I have an old 4.2 ACS running on an old Windows Server 2003.  I bring out of the Windows Server 2003 for security reasons.  I know that 4.2 is not supported any longer.  Unfortunately, I don't have time now to migrate from 4.2 to 5.x - and the 4.2 do