(Redirected) Aurora 4 updated BIOS update now does not start

Similar Questions

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MacBookPro6, 2 batteries ran down to 2 mos now does not start

  15 "2011 MBP 6.2 running 10.11.3 remained out of order, disconnected for about 2 months. The battery after plugging and shows 5 lights. The MBP now does not start - no edge no screen no effects nothing.

  I have reset the SMC, took out the battery and successor, removed or put around the bars of memory without any effect.

  A bad battery will keep it to start when it is plugged? Is there anything else I should try?

  TIA,

  Bill

  What happens if you leave the battery or disconnected and try to start the machine?

  It happened sometimes with macbook air which complete draining the battery damaged map logical.

  A defective battery should not influence your machine when you hooked it up.

  I recommend you to wear to a bar of genius of apple for validation.

  See you soon!

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye

• Update Adobe does not start

  I see the toolbar icon that there are updates available, but demand for CC does not start

  Hello Jeff,.

  Nice to hear from you. Unfortunately, my clients don't give me much time to solve my software problems.

  In the meantime my technician solved the problem. It was not enough just uninstalling software Adobe ALL of my computer and reinstall AMM eight times to make it work (it was always empty and showed no application that can be downloaded, or anything else).  AdobeAAMDetect.plugin in two folders on the computer had to be removed in order to get the function of the AMM.

  We hope to go fine now. The problem of Camera Raw seems to be fixed too.

• Win7pro update download does not start

  • win7pro. Download ISO update
  • does not work in the browser without stop with the second window asking open/save/Cancel. by clicking on 'Open' start the Browse button, and then stops and same window starts again.
  • I tried fresh download and still no.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• From itunes last update itunes does not start without the permission

  iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions.  I am the administrator. Windows 7 Professional.

  See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.

  TT2

• Windows Live Movie Maker, used to work, but now does not start

  2 months ago, I used windows live movie director very well. now, I get a message that it does not start and to check my system requirements...  I loaded all updates, check the driver, uninstalled and reinstalled, still does not, any suggestions?

  Have you tried the fix program option in uninstall a program from the control panel.

  Photo Gallery work under voltage is windows? If not,

  Windows Live Photo Gallery is not responding or does not start,

  http://support.Microsoft.com/kb/944221/en-us

• ENVY of HP dv6 7357se: No. BIOS, computer laptop does not start

  Hello

  My laptop doesn't even start that too suddenly. After working for work that I put in standby and it does not start after that.

  I don't even see the "HP" logo

  I removed the battery for a while and reinsterted it. the bios came back for 2-3 seconds and it stop. I turned back on it and no. BIOS.

  I pressed the power button, only caps lock flashes and nothing else.

  Why this problem has come and what to do?

  HP document troubleshooting here may have something that will help you:

  http://support.HP.com/us-en/document/c01732674

• I changed my motherboard and now does not start LR

  I changed my motherboard (PC Win 7) and 6 LR does not start

  I need to download?

  I have to start LR 5 and proceed to 6 LR?

  Thank you!!!

  Franco - Italy

  Hello

  Yes you are right.

  You will need to load it again.

  Please see Download Photoshop Lightroom if necessary.

  Kind regards

  Sheena

• Update the BIOS Alienware x 51 now does not start

  So I have recently reinstalled Windows 7 and a re-install my drivers and using the products download page on another computer Dell drivers and download them to a flash drive and upgrade on the primary computer. I have finished all updates until I got to the BIOS update, I installed in and rebooted my system, now it starts but freezes and does not move to the Alienware Logo. Just to put it out there, I have updated BIOS A08 A14. The screen that I can like normal Alienware Logo screen, showing that I use an Alienware x 51, a bar of blue loading, BIOS Version A14 and then Setup F2 and F12 Boot Options. Any help would be greatly appreciated.

  Thank you

  Zach.

  Hello

  Check in the Bios (for access to the tap water of the F2 key on startup Bios) under the Startup section, look for an option called Boot Mode and make sure that its game in the UEFI. Also, make sure that the Secure Boot option is turned off, save the changes and reboot the system. Let us know how it goes.

• Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

  Hi guys,.

  I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

  Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

  Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

  Is it possible to fix? Or is it?

  Thank you very much for your help.

  BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

  Joey

  > I guess I've damaged the hard drive or the card mother or something.

  The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
  I guess that this happened because the flash procedure was interrupted.

  I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

  I keep fingers crossed

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Vista - Error Code: 0 X 80072726 (Windows Update Service does not start)

  When I run Windows Update it says that it is impossible to connect to the service because the service is not running. When I go into the Services to start the Windows Update service, it says: Windows could not start the Windows Update service on Local computer. Error 0 x 80072726: an invalid argument was supplied.

  I am running Vista - 32 SP2, Mcafee antivirus (day and daily scanned), IE v8.0.6001.18904

  Everything was working fine a week ago.  The only thing I changed on my PC since it is that I have installed Bioshock 2 and Games for Windows Live.  Uninstalling these applications has not solved the problem.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. manually & repeatedly updating the McAfee application until you get a invite "no update more".

  3. components of Windows Update (new) reset: http://support.microsoft.com/kb/971058 [access KB971058 via IE8 only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]

  4. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft