(Redirected) My Dell Inspiron says unable to connect to the internet

Similar Questions

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  Seems to be counterfeit software.  Checked the site and has the wrong serial number.  Looking to show several spelling mistakes in the 'fine print' on the box.

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• BlackBerry smartphones it says "unable to connect to the requested server" whenever I try

  He continues by saying "unable to connect to the requested server" every time I try t open any website, wi fi is perfectly connected to the phone there is no problem with the wifi, it was working until yesterday, but today I am faced with this prblem, please let me know the solution as soon as possible.

  Hi and welcome to the Forums!

  Can you please clarify? You say that you cannot connect to the server, and then you say that WiFi is perfect. Can say you it was OK until yesterday. So I'm confused about what you are who do... is it via WiFi or via your carrier connection data?

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• Error when you try to access my library in CC saying "unable to connect to the server.

  I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.

  

  Hello

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Unable to connect to the Internet / camera Manager.says I am missing drivers

  My computer crashed with virus; I wipe the hard drive around and installed Windows xp home edition. My computer is fine, but I can't get on the internet. The Device Manager has marked these places with problems (see list below) (problem is no driver installed) I'm just figuring that this is where my problem lies (unable to connect to the Internet) can you tell me please what to do to connect to the Internet and where the problem can be

  Device Manager

  Other devices

  Ethernet controller

  Network controller

  Unknown device

  Video controller

  Video controller (vga compatible)

  Go to the manufacturer's site (for whatever the brand / model of your computer is)

  Find the template, then download and install the drivers for those

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Satellite L300-1 a 6 - unable to connect to the internet

  I have a problem - unable to connect to the Internet.

  First of all, I try to use internet DSL from phone, there was no result.

  Then I try to use digital TV internet - no result.

  Laptop does not detect a network, it says - undefined network.

  My firewall is active, now I use a modem to laptop...

  Sorry, but I don't understand how you have configured your DSL router/modem.

  First of all, you need to configure the router and need to insert all the data from your ISP (Internet service provider).
  Usually the model or DSL with router assigns the IP address. Therefore, only connect your LAN cable to the LAN books and you should get a connection to the DSL router/modem.

  I think that in most cases the whole process is described in the manual of the router

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Missing error driver unable to connect to the Internet

  Original title: I deleted a driver

  I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?

  Hello

  What is the brand and model of the computer?

  Method 1:

  If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.

  Driver can also installed from driver disk provided by the manufacturer of the computer.

  Method 2:

  You can also perform a system restore to the date when the computer was working fine and check.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  Method 3:

  I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Hope this helps and keep us posted.

• Unable to connect to the Internet via a Linksys Wireless card

  I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

  I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

  Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

  Pings what either using the Wi - Fi connection failed (expired).

  I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

  I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

  I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

  I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

  I would appreciate solutions others have tried and who has worked with this problem.

  I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before