(Redirected) Office network 2330 and two in one?

Similar Questions

• Office network disconnects and refuses to connect.

  Original title: network path cannot be found/nom_peripherique unrecognized - peripheral network disconnect themselves, do not share network

  Our firm has a network that connects the main CP in the conference room with the printer/scanner and all other PCs in the office. Recently he started to disconnect randomly various devices, why is this? Once, it disconnects often refuses to recognize other devices on the network names or indicates the network path was not found. Why is it a few days and then all of a sudden a computer disconnects? Is the wifi modem on our pc reception causing th eproblem because its old? the firewall settings cannot be because most of the affected epcs th have active firewall? Please help, it is really hard to share information at the office without the network and even more difficult when the internet refuses to connect as well!

  Hi Maxine,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that you have a problem connecting to the other computer in a corporate network. This problem is linked to the domain (company network), you can contact the administrator of the network of the office or write the topic in the Technet Forum for better support.

  Visit this link to report the issue in the Technet Forum.

  Hope this information helps. Answer us queries windows and we will be happy to help.

• Help with the VLAN on SG200-18 and two switches SG200-08

  Hello world. My apologies, but I'm only average at best with my CISCO skills. I have simple installation running some network devices connected via 3 CISCO switches. It is small office and two bedrooms - one with the servers and the other with the printer and pc. Each room has 8 ports SG200-08 pass.

  Router / firewall is Sonicwall TZ215 and manages the internal routing between VIRTUAL networks. Each SG200-08 was directly connected to TZ215 (no SG200-18 again) and VLAN worked perfectly. Please see diagram below...

  Problems started when I added in the Center SG200-18 more to handle additional devices. Everything that I'm doing wrong, but I can't do VLAN longer works. Something I won't set up correctly in SG200-18.

  Please help me to Setup VLAN here - tag, unidentified, PVID, trunk... I am completely lost and already had to reset SG200-18 twice.

  My work without port switch 18 Setup was like that.

  SG200-08 (1)
  G1 1 trunk 1U, 100 t
  G2 1 trunk 1U
  G3 1 trunk 1U
  G4 1 trunk 1U
  G5 1 trunk 1U
  G6 1 trunk 1U SERVER3
  G7 trunk 100 100U SERVER1
  G8 trunk 100 100U Server2

  SG200-08 (2)
  G1 1 trunk 1U, 50 t, 200 t
  G2 1 trunk 1U
  G3 1 trunk 1U
  G4 1 trunk 1U PC1A
  G5 1 trunk 1U PC1B
  G6 trunk 50 50U PC2A
  Trunk PC2B 50 50U G7
  NETWORK PRINTER for the 200 trunk 200U G8

  Thank you in advance.

  VLAN.jpg

  

  Hello

  Oh I'm sorry. I understand that you have 3xSG200-08 and 2 of them with the same configuration :-). So no need to use this port for now.

  Kind regards

  Aleksandra

• Networking VMotion and fault tolerance

  We will configure separate vSwitches for management, vMotion and FT. Each will have a pair of physical interfaces. I wanted to know if it is advisable to have separate IP space for management of ESX, vMotion and FT of if they are all on the same VLAN? If the load is a determining factor, assume heavy vMotion and load FT. 192GO by potential server for 40-50 virtual machines per host.

  I'm a newbie to networking Yes, if separate IP space is a recommendation, which is the basis behind this reasoning?

  I recommend you set up 3 different IP subnets. The subnet IP public/business for the network management and two separate for vMotion private IP subnets and FT. All three go in the VMkernel and from what I've read so far, put them on the same subnet may cause problems with routes traffic through the appropriate interfaces. In addition to this, it makes sense for safety, as amvmware already mentioned.

  André

• In my laptop network 2 and an office can I install Adobe products (that I bought) on more than one computer?

  In my laptop network 2 and an office can I install Adobe products (that I bought) on more than one computer?

  Yes.

  You can install and activate individual-licensed adobe programs, until, two computers at a time.

• I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

  I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  You will need to purchase an additional license.

• try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Networking two computers - one running Windows XP and Windows 7.

  I just got this new laptop yeaterday which has Windows 7.  My other laptop that I am trying to network with some (or share a home group) works on Windows XP.  I have zero chance having these computers recognizing each other or another share.  Any ideas out there?  Thank you!

  Hello

  You use the work (Home) network, homegroup.

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• When the progressions referred to my Office I get two icons, one is a file folder, when I try to delete this two icons are removed

  When the progressions referred to my Office I get two icons, one is a file folder, when I try to delete this two icons are removed from the trash how to solve?

  When the progressions referred to my Office I get two icons, one is a file folder, when I try to delete this two icons are removed from the trash how to solve?

  So if you right-click on the desktop and choose New--> shortcut and then create a shortcut to something, what is happening?

• I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).

  You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.

  8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this).  An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.

  There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free.  To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hub and spoke VPN network traffic between two points talked

  Hi, I have a star VPN network topology, and all traffic is remote office to the data center,

  I have a request to build a tunnel between two remote sites to access some servers between two remote sites,

  Can I just change the ACL of valuable traffic to to include say a Cabinet to Office B in rule Cabinet a Datacenter and Office B tunnel to tunnel data center.

  In doing so, I can avoide the tunnel between two offices (and B)

  See you soon

  Hello

  You can make the traffic between the two rays go through the hub or build a new tunnel between the rays.

  If the hub is an ASA you must authorize same-security-traffic intra-interface permits

  If the hub and the spokes are routers, you can also use DMVPN to dynamically create a tunnel between the spokes when necessary.

  Federico.

• I have two libraries 'photos' and only want one. How Merge/consolidate their?

  I have two libraries 'photos' and only want one. How Merge/consolidate their?

  Photos has no tool to merge two libraries by importing each other.

  • You can export the photos of the smallest library and import them into the largest library,
  • or merge libraries in iCloud, if you sign up for enough storage iCloud accommodate the merged libraries.  To merge in iCloud activate one of your photo libraries as the photo library iCloud and wait for the pictures to download on iCloud, then proceed to the second library, enable this as the iCloud photo library, wait for the pictures to download. iCloud will download the pictures of the first library to the second, and you'll have a library merged in the second library.

  Or buy PowerPhotos.  This tool allows you to move photos between libraries and can help you merge some libraries. You can buy it here:

  • Powerphotos: fat cat Software

• I recently bought Empires one and two years, but I can't seem to install or to come on my computer

  I recently bought Empires one and two years, but I can't do either to install orcome upward on my computer on my vista or 7 computers laptop anyone can help please?

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest to perform the clean boot and then try to install.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 3:

  I also suggest you to follow the link and check.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  See also:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• I want to know if we can add more than one network card and maximum how we can add?

  Well, if I want to add a network card or two at - it a possiblity of external cards containing those integrated? If so what to do with it?

  This would be only limited by the number of slots or ports for the cards.  What exactly are you trying to accomplish?  These types of configurations are generally only used on servers and, depending on what you are trying to accomplish, the use of multiple network cards usually leads to two simultaneous situations:

  1. Headaches size Texas!
  2. Size of Texas PITA!

  Shortly after affected by these events of size of Texas follows a sudden want to break the computer with a hammer usually...

  John