(Redirected) thundebolt 3 or VGA/DVI/HDMI USB 3.0 adapter to

Similar Questions

• PC to TV via the PC USB out and DVI/HDMI Converter - it will work?

  My Dell Inspiron AIO PC is brilliant but strangely doesn't have any video on port (why not, Dell?). I want to be able to show images of HD quality from this PC to my TV in 1080i HD. Is this possible via the PC USB2 port via an external converter of DVi/HDMI video card?

  Ive never tried one, but there are such things if that's what you need - http://www.amazon.com/USB-2-0-To-HDmi-Audio/dp/B004UVBOVE?tag=duckduckgo-ouk-20 (there are other brands and models).

  I hope that someone with experience using a peut "chip". Otherwise, it may be useful.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• Apple cinema display DVI HDMI naar

  I have a monitor cinema display with DVI and Firewire USB 2010. I want to connect it to a generation of 3rd apple tv. A DVI HDMI adapter works for this?

  Thanks in advance

  Maarten

  I'm not 100% sure but I don't think it will work, the cinema display monitor is 16:10 so be deformed but if that was the case.

• Need for DVI, HDMI on Satellite A300-15 b output

  My toshiba laptop Satellite A300-15 b has only a VGA and S-video out;
  It has an Ati Radeon HD 3650 512 MB graphics card that supports hdmi and dvi, FullHD;

  I know that dvi and hdmi are of better quality than vga, so how can I connect my laptop to the dvi and hdmi ports to get the full quality?

  I think as a limitation on the taken resolutions dynadock supported?
  There is the vga - dvi converters, are good? and how to get quality hdmi and give the hdmi output? thanx

  Hello

  I doubt you'd be able to get HD quality on external monitor using this laptop.
  As you say the book contains the outputs VGA and S-video.
  The s-video port allows you to connect a TV to the laptop computer and the VGA to connect the external monitor.

  But the two ports provide analog video signals. The DVI and HDMI are digital ports and it s not possible to convert the analog signal into a digital signal.

  Of course you can use some cards but are not converter and I doubt that these adapters would improve the video quality.

• MacBook Air + VGA + DVI - I?

  How can I connect MacBook Air two independent observers (a VGA only; the other is VGA / DVI - I)? I have a VGA splitter, but using that made the two external monitors same.

  I think that you would need some kind of hub Thunderbolt or separator you have. Just to be sure, your current solution made just two monitors mirror each other?

• Toshiba L2333 TV - DVI-> HDMI - no sound

  Hello!

  I have connected my PC via DVI-> HDMI cable to the L2333.
  It works very well.

  However, how can I give audio to the TV via a my sound card output?
  My PC does not provide any audio over HDMI.

  I've tried the input SCART and the entrance (by component) audio cinch. No sound.

  Thank you!

  Thomas

  DVI provides only the video signal. The HDMI port provides both: video and audio.
  If you connect the TV to s for laptop DVI, audio port would not be transmitted.

  I guess you need connect s headphones Jack card or the audio output jack to a receiver hifi (av) to get the best sound. Or another possibility to connect to the computer is the use of DVI adapter component. Then, you should be able connect the computers taken DVI Component of televisions. The audio signal would be transmitted from the headphone jack of the computer to the TV's component audio L / R

• Satellite A200 23W - no connection with the TV (VGA-DVI-tv)

  I tried to connect my SatelliteA200-23W with tv (DVI plug). Like cable, I had was dvi to dvi and my laptop has vga only (female) I got an adapter (VGA/DVI). After that I made the connection (my TV is also a Toshiba LCD 30 inch) and I used Fn + F5, with the channel setting DVI TV, I can't see or hear anything whatsoever!

  Any who tried to link its A Satellite with tv?
  Must say that I use Windows 7 edition.

  Hello

  To use the monitor external, you must plug the cable first. Then turn on the TV and choose the right channel on your TV. Next turn on the laptop and then you should be able to switch between monitors if you press FN + F5. Check it!

  Also, make sure that you use a high quality cable.
  You can use a cable without adapter?

• Adapter VGA DVI - HP 3500 Pro

  Hi all

  Recently, my boss bought a bunch of HP Pro 3500 s. They come with a VGA and DVI, port that we use both for a dual monitor set up. Now when we connect to these ports by using a VGA cable and DVI set up works very well. However, when we use a VGA DVI adapter DVI port, the second monitor is not detectable. Is there a way to solve this problem, so we can use the adapters? Any suggestions would be greatly appreciated.

  Thank you

  SJ Wolf

  You use the built-in ports in the mobo?
  One is other vga and dvi?
  Is the port dvi - d (digital) dvi or dvi - i (ntegrated) - see wiki:
  http://en.Wikipedia.org/wiki/Digital_Visual_Interface#connector

  Sorry for so many questions, but I can't find a document for this pc that displays the ports - just this one:
  https://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c03550750-1%257CdocLocale%253Dde_DE&javax.portlet.endCacheTok=com.vignette.cachetoken

  If the port is dvi - d adapter-dvi2vga does not work...

  C.

• HP Mini 210-1076NR: HP mini 210 VGA to HDMI

  good day... has someone can help me to let me know how to send image of VGA to HDMI on TV? I already install the latest windows updates and have a VGA/HDMI cable, but the picture on the TV...

  Thanks in advance for any help or suggestion...

  Hello

  From analog to digital, you need a good converter. I don't know your cable but the following converter may help:

  http://www.cablechick.com.au/cables/VGA-35mm-stereo-audio-to-HDMI-converter.html

  Kind regards.

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Output VGA or HDMI on Pavilion G6-1b60US

  Hello world

  I have a question been asked a hundred times before, namely: how to activate a VGA or HDMI output on a laptop outside of the Windows environment?

  The laptop in question is HP Pavilion G6-1b60us, and it has the AMD A4 processor - 3000 m with a build-in Ati Radeon HD 6480 G graphics card.

  The problem is that someone intervened on this laptop, while he was lying on the ground, and the screen is broken. So I used this laptop as a desktop, hung on a 19 "TFT monitor, and works very well.

  As a first step, I have had video output via HDMI outside Windows port. So, for example, I could get into the BIOS of this laptop using the external monitor.

  At one point, I reinstalled Windows from scratch (once again, it was very easy because the monitor worked great outside of Windows), and when I did that I also decided to update the BIOS.

  It was very stupid.

  I have updated BIOS to the F.46 F.34 version. Since I've updated the BIOS, I have a video on the external monitor output, while Windows starts. Once WIndows has loaded the external monitor works fine.

  The problem is that if I ever need to get into the BIOS, or reinstall Windows, I just can't do that, because the external monitor no longer works.

  So, I immediately flashed BIOS version F.46 F.34, but it does not work. I have still no video on the external monitor output, unless I'm on Windows.

  With the help of an another HP laptop I asked autour (a G42) I checked to see if there are options in the BIOS to enable VGA ouput. It doesn't seem to be an option. I'm not quite sure if the G42 and G6 use the same BIOS, but since they are both "Insyde", I suppose that the options are the same.

  On the laptop of G42 (that is running the version of BIOS F.36 which is not available for the G6), I can get it out of the BIOS on the external monitor by hooking a HDMI and VGA monitor. The BIOS will then produced through the VGA screen. (may be a bug in the BIOS, but good: if it works, it works...)

  I tried the same thing on the laptop G6, but unfortunately it does not work.

  So my question is: is anyone know how to exit the BIOS on an external monitor? And please don't tell me that it is not possible, because before I updated the BIOS on this laptop G6, I could access the BIOS on an external HDMI monitor very well. I just want to know how do I reactivate this option.

  Three things to try, but there is no guarantee that any of them will work.

  Unplug the adpater, remove the main battery and CMOS battery. If you need instructions on how to remove battery CMOS, post again.

  Now press and hold the power button for 60 seconds to do a hard reset.

  Reinstall the CMOS battery and plug the adpater and start _ your monitor. (do not install the main battery at this stage)

  If all goes well, you will be confronted to load the BIOS default _ select to do and once the computer boots be sure and reset the clock as Windows detects the wrong date and time and tell you that it is not authentic.

  There is a certain risk to that because if the BIOS is not displayed on the external screen there is no way to tell the machine to run the BIOS defaults. To do this at your own risk _ sorry.

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Do a hard reset as above, but do not remove the CMOS battery, there is no risk involved here as you do not clear the BIOS settings.

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Open the machine and simply unplug the laptop to physically unplug the motherboard monitor. Do a hard reset after that as above with remove them the CMOS battery with the external monitor is connected.

  I think that maybe after that put BIOS update that he always sees the monitor internal because it is always plugged into the motherboard even if the laptop screen is broken.

  There was a guy with a laptop HDX 18 where his monitor failed and he was trying to do the same thing you are. His solution was to unplug the laptop from the MoBo and then the BIOS I saw the external display.

• Latitude 6430u - cannot simultaneously VGA and HDMI output

  We have just received our first batch of 25 Latitude 6430u (2 lots more on the way), and we were surprised that he doesn't at the same time a VGA and HDMI video output. GPU Intel HD4000 said that it should be possible. Someone successfully obtained several monitors working with this device? We lack Windows 8 Enterprise with Dell drivers.

  Sigh,

  It seems that the 6430u uses a LVDS connector instead of an eDP, so the Intel HD 4000 can't handle 3 independent displays. LAME.

  I found this by following the instructions given in this response:

  superuser.com/.../3rd-display-laptop-and-2-displays

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Use of the USB to Ethernet adapter to find cRIO Systems

  Hi all

  I'm trying to connect to one OR cRIO-9066 to my laptop using USB-to-Ethernet adapter.  But I have a problem with it; Find VI systems shows no results unlike the direct connection via the ethernet port on the laptop.  I wish that the connection of the USB-to-Ethernet adapter to support this feature as well.  I would like to know if somebody did, and I hope a solution to this.

  Here's my setup. I bought the adapter USB-to-Ethernet of RadioShack. I connect the adapter to a USB port on my laptop. The adapter is the female Ethernet port on the other end. I directly connect cRIO and the adapter using a crossover ethernet cable. What is of note is that ethernet connection works.  I can specify the IP address of the cRIO then I can communicate with crio in the same configuration. However, finding systems VI cannot find any system.  LabVIEW 2015, is what I use.

  Instead of using the adapter, if I use a direct connection via the ethernet port on the laptop, find systems VI works fine.

  Any help or suggestion is appreciated.

  Thank you in advance.

  After all, my conclusion to this problem has been the model of Ethernet USB card I was using was not good.

  Gigaware USB to adapter Ethernet (from Radio Shack) was working not with find systems VI on my environment even though it is still able to connect to CRIO if I know the IP address. I even had the other, but the result was the same.  The solution for me was to use another model of the BADGE, which is NS-PU98505. It is cheaper, but has worked with find systems VI.

  I don't know what's behind the different behaviour, but the issue is resolved on my end for now.

  Thank you all for all the tips and ideas. Congratulations to all!