Satellite A200 23W - no connection with the TV (VGA-DVI-tv)

I tried to connect my SatelliteA200-23W with tv (DVI plug). Like cable, I had was dvi to dvi and my laptop has vga only (female) I got an adapter (VGA/DVI). After that I made the connection (my TV is also a Toshiba LCD 30 inch) and I used Fn + F5, with the channel setting DVI TV, I can't see or hear anything whatsoever!

Any who tried to link its A Satellite with tv?
Must say that I use Windows 7 edition.

Hello

To use the monitor external, you must plug the cable first. Then turn on the TV and choose the right channel on your TV. Next turn on the laptop and then you should be able to switch between monitors if you press FN + F5. Check it!

Also, make sure that you use a high quality cable.
You can use a cable without adapter?

Tags: Toshiba

Similar Questions

  • Satellite M30X-129 loses connectivity with the external USB device

    I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

    Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

    If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

    I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
    Thank you
    Abderrahman

    Hello

    This happens also with the external USB mouse?
    This occurs if the power adapter is plugged or only if the laptop running on battery?

    In-hubs properties > Device Manager USB root-> power management
    You will find the option called allow the computer to turn off this device to save power.

    I would recommend the brand and disable this option.

    Maybe it helps.

    By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

  • Satellite A200-175 - recovery ends with the error message

    I bought my Satellite A200 2 years and it was the first time I tried using the recovery discs. These discs are properly kept in their original boxes before you use them (no scratches). My computer has virus and I tried to reinstall the system.

    When I started using the recovery disk, I put disc 1 into the optical drive and wait. Soon, he prompted a 'Ghost' screen and began to copy files. Everything seemed OK, but after a while, I get the following message:

    "wimcopyfileex failed...". Error image restoration... ImageX couldn't shall apply from fist F:/05366xsp.swm index 2 odd in c:

    Can anyone help? Thank you very much

    Hello

    I have the Satellite A200 and I got a DVD only. There is no ghost window. Ghost was used until the year 2005. Since then, Toshiba uses new procedure of collection called Rico or Reco. I remember more.

    Can you please send us the number on this CD/DVD recovery?

  • Satellite A200 - how to connect to the TV?

    Hi you.

    How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

    Kindly help me...

    Hello

    You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
    Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

    If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

    > If I use the VGA - RGB cable something's come out to TV but its streaming.
    What settings did you use (screen resolution, screen refresh rate, etc.).

  • Satellite A200 23W stop seconds after pressing the power button / stop

    Hello all :)

    I just bought a laptop Toshiba Satellite A200 23W a few hours ago.
    I turn it on and let it complete the installation of Vista.

    After the installation of Vista finishing it asket to resturn laptop and from that moment, the laptop is "dead".
    After pressing on restart the computer (from Vista) computer turns off without problem, but he never did it again!
    After a few minutes of waiting, I tried to start it by pressing the power button.

    Now when I press the power button, I can hear the HDD work and most of the time until I see something on the screen of the laptop computer stops!
    Now, I noticed that both the battery indicator AND the DC IN light are hot flushing and stop Flash at times.
    Reading the manual, I guess that the DC IN indicator should Flash in all not well.

    I tried to uninstall the battery and try to start the laptop, but in this case I can't even listen to the HDD, commissioning!
    I try to unplag and replag (on the laptop as well as Jack) power cable but again no result.

    Any ideas of what past?
    Thank you very much

    I don't know what the problem is here and, in my view, should not be so important to you. Contact your dealer as soon as possible and to talk with him. Explain the situation. You will get may be new notebook. Otherwise, please contact the nearest authorized maintainer and let check your laptop.

    The laptop is brand new and it should work. Please do not wait too long.

  • Satellite C660 WIFI does not connect with the channel 1 of the router

    Hello

    I have this problem for several months. I connect my laptop with the D - link DIR-615 as a WAP browser.

    I can't remember, but the fact is that I can't connect more with channel 1 of my WAP.
    Connection with the other channels is no problem.

    Other laptops or the available have no problem connecting to channel 1.
    He's tried a recovery, remove and reinstall the driver for my WIFI.

    All know what to watch?

    Kind regards

    Jacky Deschepper

    Where have you changed channels settings: within the router or the wireless network adapter?
    Is that it s any laptop you are using. It s always a matter of the WLan card that is integrated.

    Usually, you can change the Wlan card settings in the properties.
    Go to Device Manager-> Wlan card-> right click Properties-> Advanced tab
    Here, you would be able to change the available settings.

  • Satellite A200-23W - SATA1 or 2 interface?

    I would like to be sure which is the right SATA for my Satellite A200 23W, bought 2 years and a half ago. What is SATA2? I installed an SSD 60 GB drive with Windows 7 64 bit, but I don't know about the SATA mode I.

    FYI SSD (OCZ VERTEX 2 SATA II 2.5 60 GB) works well since I did the installation (3 days ago)

    Hey,.

    You can use two SATA standards, because the connector is the same.

    If your laptop can handle SATA 1 readers, all SATA 2 drives are compatible downgrade so no problems at all! :)

  • Satellite A200 - 1 H 2 with Vista does not work after restoring

    How-dee!

    I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
    Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

    After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

    So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
    "Windows cannot repair this computer automatically" and below:
    "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

    It's weird cos I have no device connected to my computer and it was during my recovery system.

    After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
    "Root cause found.
    --------------------------
    Failure so that the Setup program is underway"

    What should I do now? I don't have any bootable Windows Vista DVD.

    Please heeeeelp!

    PS. Sorry for my poor English :)

    That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
    However, maybe that something was wrong during the first attempt

    Try using the recovery again disk and try reinstalling this cell second time

    Good luck

  • Extension memory for Satellite A200-23W

    Wonder if I can upgrade memory (now 2 x 2 GB at 667) with two others at 800 mhz...

    Hello

    You can upgrade the RAM with 800 MHz modules, but as much as I know this will not improve the speed and the RAM will run at 667 MHz.
    The reason is that the chipset doesn't support 800 MHz.

    Satellite A200-23W supports up to 4 GB, so any update is not necessary.

    Welcome them

  • Satellite A200-23: noise Anoyed when the speakers are not set to mute - Win7 64 bit

    When I leave the table of sound mixing (_without mute audio on microphone_) there is a noise very disturbing speakers.

    Windows 7-64 bit, that's what I installed in a Toshiba satellite A200 23W and I don't have any other problem except micro that it does not work on SKYPE.

    Sound alone, works very well, as soon as I hear anything * when I muted microphone *!

    Is this all I can do?

    It is not easy to give you an answer. I don't have that kind of problems on my Satellite phone and Skype works perfectly (audio/video).
    Have you tried to play a bit with the sound and the Skype settings?

    You hear the sound in Skype only or how to understand this?
    When you use the headset is this annoying noise still there?

  • Satellite A200 23W: XP-> Bluetooth question and mass storage controller

    Hello

    I have a satellite A200-23W and just installed Windows XP SP2 and the problem is:

    1. that i can't see the anyware bluetooth (I istalled the monitor bluetooth from the web site of the Union European toshiba)

    2. also, in Device Manager, I see that the mass storage controller needs new drivers but I can't find?

    Thank you

    Alex

    Hello

    With regard to the point;

    (1) the laptop supports BT certainly then have you installed Bluetooth driver too?
    BT monitor is a utility to control BT, but to use the BT, you need the BT stack!

    (2) this unit is probably the module of Robson former Turbo Memory.
    This material is only supported by Windows Vista.
    There is therefore no Windows XP driver.

    See you soon

  • How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

    How to enable the WLAN on Satellite A200 - 1 M 8 with Vista OS, FN + 8 does not work

    Make sure you wireless switch on the side of the unit is on. Click Start-online panel-online network and sharing Center => manage networks wireless (on the left) click the little more beside the word 'Add' => select 'connect to a network that is in range of this computer' => you will see a list of networks that are in range so, select the one you want and enter the encryption key if it is a secure network

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

  • Re: Satellite A200-237 ETA-6 with Windows XP

    Hi ppl,

    My name is Sibbe and I am from Holland and here again.
    A few months ago, I bought the Satellite A200-237, distributed initially with Windows Vista. I really enjoyed working with Vista, but everyone knows that Vista slows down your system. Also a lot of software and games do not work on Vista so I wanted to try if my laptop also works with Windows XP.
    So I installed Windows XP on my laptop, no drivers or software. After hours of searching on Google, I discovered that a lot of things that worked on my laptop with Vista don't work also on XP. For example:

    -FN button does not work on XP ((quand j'ai appuyé sur le bouton dans Vista, flashcards est apparu sur le dessus de mon écran) only the green light comes on but the F1 to F12 keys does not work)

    -Toshiba Power Saver ((en fait, cela ne fonctionne pas sur Vista mais c'était parce qu'il y avait beaucoup d'options dans les paramètres d'énergie de Vista) now, on XP, you need to install another program first before saving work?)

    In any case, is anyway how I can do these things work under XP. And, of course, would be nice if I could use the flash cards for the FN key, but I suppose Toshiba has never done those for XP.

    Data sheet:
    Intel Core 2 Duo T8100 2.09 GHz
    2 GB of RAM
    ATI Mobility Radeon HD2600 256 MB
    230Gb S - ATA HDD
    Windows XP SP2 (not yet fully updated)

    Thanks in advance!

    Friend Sibbe

    Post edited by: Sibbe

    If you have installed XP on the Satellite A200 series you should not t forget to update the BIOS to the XP version.
    If you n t update the BIOS, then your FN buttons will not work even if the correct drivers are installed.

    So be careful and do not forget that the BIOS and other XP drivers designed for you, the series are installed correctly!

  • I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    Hello

    Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

Maybe you are looking for

  • "error code 43' when you try to move the iphoto folder.

    Hello When you try to transfer my photos on external hard drive folder, I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) ".  I'm following the instructions from apple by

  • I try to open Facetime

    When I try to open Facetime it refuse to do so and he gives me this I work with an iMac 27 "late 2009, 3, 06Ghz intelCore 2 Duo 12 GB memory game ATI Radeon HD 4850 512 MB 10.10.3 System. Is it not possible to contribute to this constellation?

  • Spectrum x 2: spectrum x 2 touchpad not working not

    Dear HP support, the touchpad on our spectrum x 2 does not seem to work -. I read what is suggested on another similar post. We are pleased to make this "hard reset", but how can we be sure that we will not lose data / create any other problem on the

  • EXE cannot load DAQmx screws

    I have LabVIEW8.6 and NOR - DAQ8.8 on my system.  I created my EXE and Setup successfully.  When I installed the program on the machine of laboratory, I received the following error message when I tried to run the program: LabVIEW: Resource not found

  • file replaces the control

    I want to save the data of a CQI process data in a file.  I want to check if file exists, and if so, ask user to overwrite or no first and if not crush, get a new file specification.  Attached code fragment is supposed to do these things, but does no