(Redirected) Venue 11 pro - does not detect a different view

Similar Questions

• My macbook pro does not detect my s6 (connected via USB). How can I solve this problem

  I tired to connect my phone using the usb cable, macbook pro does not detect my phone as a media device, but the phone is charged. Y at - it a patch or an app, I need for macbook pro to detect my phone.

  Thank you

  If you expect to be recognized in the Finder, note that it is not designed for it. Admittedly, in the Capture of images, Photos or iPhoto if there is no picture on the device.

• MacBook Pro does not detect monitor Dell through CDM

  Guys, a few weeks ago I asked a question if bolt of lightning 2 CDM-compatible monitors. You guys lied. I got the Dell P2715Q today and I have connected to the computer with the USB cable I had Plug and cable thunderbolt. I did everything, but my Mac has not detected even if I pressed the "Detect" button in the system preferably several times. I restarted my computer and still nothing happens. The monitor speaks to me of * like 'Enter in Safe Mode' then what I do now? What the * Apple? You create all by yourself? Your useless thunderbolt screen is worse than the air show 2011 MB! Help guys!

  What USB connection?  There is no "monitor" for this Dell Monitor USB connection.  The USB connection is a USB hub built into the monitor for other devices.  You must select one of the following values: DP, HDMI or mini-DP.

  I'm sitting on my right now uses a new MacBook Pro computer w/Retina.  It is connected via the Thunderbolt port to a Dell U2715H using the connection of the RFP at the back.  No problem at all.  I used this type of connection for the most recent years (previously an old MacBook Pro, 2011 model).

  Rich

• Venue 8 pro does not start until

  I loaded my 8 pro place last night (it will turn off the battery was empty). and this morning when I tried to turn it on, nothing happens.  Nothing will happen.  any ideas on how to make it work again?  I can't have dell run diagnostics - because it will not activate.  I also couldn't find anyway to find someone to talk with the dell website - so maybe the community forum may come to my rescue.  Ideas are welcome...

  Try pressing power and volume down at the same "Tine".  It should light up, the bios or the login screen.

  This has happened to me, but not because of a battery drain.

  Good luck

• Acrobat 9 PRO does not detect new HD

  How can I avoid having to buy the new serial number for Acrobat 9 Pro after cloning and then exchange of HD? Acrobat think I have changed my machines, but in fact only changed the HD.

  Contact Adobe customer by phone or chat service; they can reset the number of activations.

• iPad keyboard Smart Pro does not

  iPad Pro is not intermittently at the Smart Pro IPad keyboard.

  Your occurs when you attempt to enter text in the field application of e-mail address

  When the mail application has been opened by Safari to post a link etc.

  Hello BobBurns,

  Thank you for using communities of Apple Support.

  If I understand your message that your keyboard Smart Pro iPad fails all the time. I recommend the steps described in the following article to help solve this type of problem:

  Use your Smart keyboard with iPad Pro

  Get help

  If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:

  1. Make sure your iPad Pro and Smart Keyboard are in a position to Type .
  2. Remove the Smart keyboard for your iPad Pro.
  3. Restart your iPad Pro.
  4. Reconnect the Smart keyboard.

  Best regards

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Dell 7 venue does not detect the external SD card

  Hi team,

  Recently, I bought a Dell Tablet conference 7. It works very well. But there is a problem with external memory card slot, it is not able to detect the external memory card. I tried a lot of cards, all are working well in other devices, but it is not detected by my tablet. I tried my tablet as well as formatting SD card, but is still no use: (.) Please give me a solution...

  Kind regards

  Chaitanya

  Hello friend

  I also have the dell site 7 16 GB, but never fell on these issues, except when I tried to upgrade my sd card 16 GB class 10 (san disk) to 32 GB class 10 (kingston). When I put the 32 GB it does not detect, so I tried my 16GB and everything was back to normal.

  Maybe it's the inability of the dell site 7 in support of the higher upper memory class ability cards.

  My dell has also supported 32GB sandisk hybrid pendrive, this USB key with both ends... called dual player... key USB OTG of IE

• (Redirected) Waves maxx audio pro does not work

  Hello

  recently my windows has been corrupted, so installed a new but the waves maxx audio pro does not work in my inspiron 7548. When I open audio dell there is no options there is empty

  need help...

  Better for this post in the Forum Audio Desktop, here:

  http://en.community.Dell.com/support-forums/desktop/f/3513

  Bev.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!

• X 220 does not detect the wwan card

  My X 220 does not detect the wwan card ("WWAN MSC PRTSWWAN RDY FUL" in the parts list). No section of modem in Device Manager, without any question related to the wwan card. Please someone help me, how to make my OS (Win 7 Pro x 64) can detect the wwan card?

  1.17 BIOS can detect, it worked normally.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Line-In does not detect audio microphone?

  I recently got a new headset, Razer Pro Kraken, and the line does not detect my microphone, I need because I use Skype. I checked and there the audio turned up completely, and I know for sure that the plugs are correct. What should I do to fix this? I am on Windows 7, if it helps.

  And also - I can hear the audio, the microphone right pick up. And I know that he is not a defective product, because I had this problem with previous helmets in the past.

  Hello. Your laptop is an Alienware M14x? Have you tried to reinstall the Realtek audio driver?

  Reinstalling the audio driver will restore the default audio settings. On many models by default is for line-in (off mic amp) then you may need to select again for a microphone and set the mic boost levels.

  I would check the settings both on the recording of the sound Properties tab (right-click on the audio icon and click recording devices, right-click on the microphone and set as the default, right-click the microphone, and then click Properties device, then the levels tab to set the push) and also the microphone of the Realtek Audio Manager tab. I would test the microphone using Windows Sound Recorder instead of Skype.