Cannot connect after install

Similar Questions

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.

• Samba75 USB Modem GPRS/EDGE cannot connect after installing Vista SP1

  Hi all

  I have a laptop under Windows Vista Home Premium. I can't connect to the Internet using my right to Samba75 USB GPRS/EDGE modem, once I installed Vista Service Pack 1.

  Any idea on how to solve this problem? Because of some network security options has been added by SP1 of Vista who refused to connect me with my modem?

  Kind regards.

  Hi Ken,

  Thanks for the reply.

  I found that the services required to support the diap network are some corrupted how (in other words, when you enter Services, you can start/stop/restart the service. all options is disabled). I'm not looking for is the first cause, but I think so. FYI, I already turned off all firewalls including Windows Firewall.

  I will fix this by reinstalling a new copy of Vista. Tired of the trousbleshooting.

• Cannot connect after Windows Update

  I have the same problem but on Windows 7. After installing the updates I can no longer connect. I get an error that the login or password is incorrect. I don't think that hurt, I type the password. Any help would be greatly appreciated.

  hpuszyns,
  If you are able to boot mode safe mode with command prompt, then you can use the DISM tool to remove the most recent updates.  Then you can see if you are able to connect.

  DISM to remove the updates.

  Start under System Recovery Options , and select command prompt

  At the prompt, run the following command:

  DISM/Online/Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226

  Status: installed

  Output type: Feature Pack

  Install time: 25/09/2009 12:02 AM

  Find the most recent and then make a note of the name of the package.

  Then run: dism/Online/Remove - Package PackageName:WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226(name of update from previous step)

  Then restart your PC.

  You want to start with the most recent and remove them one at a time to find the update problem.

  For more information about the DISM command, visit this link.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer cannot connect after upgrade to win 7

  I have a window of lapop run Dell 7 and after an update, to stop and can not connect the next day the model keep say bad password but the suspicion is correct for my PS. I did not create a password reset disk so now I can't use my computer... MS or someone please help thanks

  Hello

  You will have to return before updates, which is unfortunate.

  See if this helps you; the first part is what you must try as you say you know your password.

  Look at scenario 2

  And you should make a password reset disk before you forgot your password, not afterwards.

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  Note

  AS you can not use your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Cannot connect after withdrawal of a domain.

  Disjoint my domain to work and now it does not have one of my passwords to connect. Nobody here knows the identifier of the administrator because I was hired just to be the administrator. Where should I go from here? Is it possible to get around the login screen?

  Here is the solution to this problem from Microsoft:

  "You can not connect after you remove the computer from the domain.

  <>http://support.Microsoft.com/kb/317049 >

  HTH,
  JW

• NB550D - no internet connection after instalation of Win 7 64 bit

  Please help - so frustrating:

  Have my NB550D upgraded Windows 7 Professional 64 bit to take advantage of 4 GB of RAM

  Now, I have no internet connection and cannot figure out what to do.

  I downloaded a driver, but says it cannot install because there is no card INTEL (R)

  Help, please!

  Thanks for the clarification!

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Cannot connect after the installation of recovery

  I got my laptop to the 'out-of-box' State & I cannot now connect you.

  When I try to use the administrator password is locked.

  When I restart the laptop, it sits at the prompt of "program."

  Any ideas how I can get connected?

  See you soon

  Gerry

  > I got my laptop to the 'out-of-box' State & I cannot now connect you.
  > When I try to use the administrator password is locked.

  That s not logical for me. When you install Recovery option you can e asked to create new account and password, if you want so for successful login, you must this username and password if you have set a. That s it.

  I got different books several times and have never had such a problem. You use recovery for the first time?

  Option switch user is available on logon?

• Help the ReadyNas Duo v1 - cannot connect after calving

  Hello

  From powering down my Nas (2 seagate drives - don't think that I have configure RAID) for a week or so, I've been is no longer able to connect to it, or find iton my network usjng RAIDar.

  I checked the network cables and everything seems ok. I tried an instal OS, which has solved similar problems I had in the past. It did not work. I then tried to connect by joining the Nas directly to my PC (after setting the ip address and the subnet because of the default Nas PC), but it did not work. The Nas does not show unusual led flashes after appearing to start normally. The ethernet jack suggests its connected as the two lights are solid. I have connected to my router, which shows that the sin is not connected to the network/router.

  I like to keep the data on the Nas, so I have not tried a factory reset.

  Yesterday, I tried flashjng the operating system by using a usb key with the last firmware (raidar 4.1.14) image. During this process, the led showed an error code; 3 flashes, which I think is bad content on the root partition. I have since Chouf down and rebooted. Its now still not accessible, but does not display of error codes.

  Help, I don't know what else to try!

  Just follow this thread. I tried a few free options but they do not work and recovered the data, because of file storage or RAID, movie files and music have been segmented. In the end, I had success with R-Studio, a recommendation of thoughts Botts. It is not a free service, but it was friendly and quick. Thanks again.

• Cannot connect after restarting Windows Update 23/02/10

  Hello
  I'm having a problem after auto restart of the latest updates of Vista.
  I don't know what specific update may have caused a problem, but as a tech person his life, I can see an update as the only reason for my problem. Restart the update took place earlier today 23/02/2010

  My problem is that my password for the user only account that I have on this PC no longer works. I tried by default all passwords I can think of and none work. I've seen similar problems since that a restoration of the system through safe mode may solve this issue however start in any safe mode, I invite me for the password for the connection. It's where that plan falls apart, he told me that "user name or password is invalid":

  I have an account, and the password is quite typical.
  I don't have a backup disk or a USB pen to reset or change the password.
  I don't have any of my discs to install due to travel abroad.

  Anyone with similar problems?
  Any help would be appreciated.

  Concerning
  Andy

  AndyUK506,
  If you are able to boot mode safe mode with command prompt, then you can use the Manager of Package to remove the updates. Then you can see if you are able to connect.  If this doesn't help you need to see what options of recovery you would have the recovery on your system partition.   If you are able to do an inplace upgrade reload Windows and let your data in tact. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet connection after installing vista

  I changed the hard drive of my labtop. Then I installed a vista business on my labtop but it can not connect to the internet. I tried this way:

  Control Panel, network and internet, set up a connection or network, connect to the internet.

  But this message: 'Windows doesn't detect any network hardware. "

  Please let me know how this windows vista able to recognize my internet connection which I use through my rotor for other computers. It cannot detect my wireless also. I wasn't expecting such a problem with vista before starting the real work.

  Hello

  Using another computer / laptop go to the website of the manufacturer of your laptop > search for a driver and software download section > key in your laptop model munber > look for the Vista operating system to the correct address > find drivers for it > download and save to a Flash Drive > transfer and install them in this laptop.

  If the manufacturer of the laptop has no Vista driver available for this model of laptop, we can not help you.

  See you soon.

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• Internet does not connect after installing Kaspersky Pure 3.0

  I use 32 bit win8. I installed Kaspersky Pure 3.0. After that, I can't connect to the internet. Before the installation, I was able to connect. My widows firewall is turned off. I tried to make a break disable firewall and protection, but it did not help. What should I do?

  ART

  IF it broke when you instaled Kaspersky attachment to remove Kaspersky do not turn off.