Re: Satellite L300-19 - unable to use power management

Similar Questions

• Re: Satellite L300-1AS - unable to connect via a WLAN

  Anyone, please help.

  My L300-1AS connects not wireless.

  The switch on the front is on and to the left, the F8 function key turns on the light and offshore, but even with it on, when I try to connect to a network it tells me that it cannot find. The diagnosis tells me to make sure that the wireless feature that it is. I'm sitting on top of the router and using another PC for this type so that the signal is there.

  I looked in Device Manager and in adapters network and when I do properties on the Intel(r) wireless WiFi link 5100 he says its working properly. The 'Update Driver' button tells me his up-to-date.

  It's as much as I think I'm able to check.

  Any help please.

  Hello

  I have a Satellite L300 too but it s a L300-10 q, but it should be very similar to yours
  In any case, the hardware switch on the front of the laptop must be on the right side. On my laptop on the right side is marked with and the left side with judgment.
  Check again!
  If you are not sure, take a look in the user manual.

  In addition you can enable/disable WLAN with FN + F8.

  If it doesn't work you should try to update the WLAN driver on your laptop. See the Toshiba WLAN portal for a newer version:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L300-215 - how to use the Draft N Wlan

  Hi guys...

  I have a toshiba Satellite L300-215, who has a card Intel wifi link 5100 AGN.
  I am connected to my wireless router BELKIN N1 at a speed of only 54 Mbps...

  Is someone can please tell me what I have on my wireless card to fix uses n parameters Project installation of my laptop?...

  your

  Hello

  Your router must support the project in order to connect to the laptop using Draft N.
  In your Wlan Draft N router settings must be enabled.

  In-WLan card-> properties > Device Manager, you can find the Advanced tab.
  You will find many different parameters. Here, you have to choose 802.11 N (Draft N).

  Generally if the two option would YOU then you might be able to use the Draft N

• Satellite L300-2This - impossible to use WiFi

  My laptop Satellite L300-2This is and I want to use the WiFi but I can't.

  Can anyone tell me please what driver to install?

  Hi mirfahd,

  Why you can t use WiFi?
  Normally Windows preinstalled version of Toshiba are all the drivers installed and your laptop is ready to use the WiFi.

  The drivers, you can download here:
  http://APS2.toshiba-tro.de/WLAN/

• Re: Satellite L300-1DN - unable to connect to the internet

  Hello guys! I recently bought a Toshiba laptop - Satellite L300-1DN and I can't connect to the internet wirelessly or by cable.

  I tried to turn on the wireless button and my laptop recognized my network without wire from my house, but he just not able to connect. Then I tried to connect the cable, but my laptop itself connected to an 'unidentified network' and the internet still does not not :(

  The internet works perfectly fine for my old laptop and my other roommates. So I guess that is not a problem with my router itself.

  I don't know computers very well, so I'd really appreciate your professional opinion!

  Thank you very much!
  Scarfy

  > One last thing, I tried to connect to an unsecured wireless network and it worked!

  It looks like a problem with your router. Check this box and look on the site of the factory for an updated firmware.

  Make sure the laptop and the router using the same standard WiFi (for example 802.11 g).
  Disable all the functions of economy of the WLAN card in Device Manager.

  Last but not least follow Luke posted.

• Re: Satellite L300-1DN - how to use recognition of face for login

  Hello

  I recently bought a new Toshiba Satellite L300-1DN and I want to use face recognition to connect.
  I registered my face with the usual set up, until the movement of the head and side by side in a fixed sofa downstaires.
  Now here or in any position other than this couch I can't connect without a fault which is very annoying!

  Because I thought that I would probably be more connect from my office in any case, I have re-made the installer, which worked.
  Over and over in the exact position even newspaper failure!

  Now, whenever I try to re setup my face etc, I am going through the whole process and it fails.
  I've done about 5 times now and make me very frustrated!

  I just want to know if theres any way to connect with different places and run the perfect set up?

  Thank you, Joe

  Hello

  Maybe I can help my friend.
  I searched here in the forum for useful discussions and forum it here:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  The user shaaaaan has reported this statement:
  To use smart Toshiba face recognition software:

  First of all,

  step 1. Although it cannot be configured or whatever it is, check the weather its already installed in your system, to do,

  1.a. open 'computer' from the 'Start' button
  1.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  1.c. double-click "Program Files."
  1.d. double-click "TOSHIBA."
  1.e. weather check the folder named 'SmartFaceV' exists in this folder.
  1.f. If the file exists, this means that you have installed, s/w face recognition even if it is not configured to use, skip step 2 and GO to step 3.
  1.g. Else if the file did not exist, this means that the software is not installed, if it does GO to step 2.
  step 2. To install the software of face recognition

  2.a. open 'computer' from the 'Start' button
  2.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  2.c. double-click "Toshiba."
  2.d. double-click "drivers."
  2.e. double-click "FaceRecognition.
  2.f. Double click on "setup" - one with an arrow going into an icon of sortoff loop.
  2.g. follow the procedure step by step for installation.

  step 3. To configure the software of face recognition

  3.a. open 'computer' from the 'Start' button
  3.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  3.c. double-click "Program Files."
  3.d. double-click "TOSHIBA."
  3.e. double-click "SmartFaceV".
  3.f. double-click "SmartFaceVSettings".
  3.g. follow the prompts. A word of counsel is to ensure that your face is well lit when you use the software otherwise, you end up spending a day in front of the software trying to get it configures your face with the selected account.
  3.h. To sheck it simply lof out press the "Windows key" AND "key of L."
  3.i. Then you will see the normal login page, click on the "Other" credentials and on the next page, click on "Start Face Recognition" & "Smile" :))

  Check it!

• Satellite L300 - 17L - impossible to use the keys FN under Win XP

  I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).
  I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.
  I use a Win XP OS

  Please, if you can help me...

  Hello

  As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE.
  You must choose this series to download driver.

  I can find on the European driver Toshiba page all the necessary XP drivers for this series and as much as I know to install the * Modules * common for Win XP get the FN keys feature!

  If please check this and reinstall the common Modules!

  Good bye

• Satellite L300: No diacritic Polish, using the shortcut "Ctrl + Alt + C"

  Hi all

  I recently bought laptop Satellite L300 and have a big problem with the combination of keys "Ctrl + Alt + C" that should produce Polish diacritical characters in the Polish language.

  Unfortunately, it does NOTHING. No character, no action at all!

  In addition, I can't assign combination "Ctrl + Alt + C" to any shortcut in Vista which gives to think, that it is already assigned to another element of Vista but I can't :(

  Does anyone have a tip?

  Best regards, Tom

  Is that what you have set the Polish keyboard Mode in the language bar?

• Satellite Pro A300 - for Windows 7 power management strategy

  Hi all

  I have the following on my Satellite Pro A300 problem:

  My laptop fan works continuously, which means almost always turn. I cleaned the entire cooling with compressed air, so it is not clean, no problem with that. The reason is that in browsers when Adobe Flash Player runs, it loads the CPU and the GPU, so that the fan trying to cool the system.

  Now I ask you, is there any solution to fix this? I mean even to reduce the GPU clock speed when I do not use the graphics intensive applications.

  I use Google Chrome as default browser and the Windows 7 OS 32 bit.

  Thank you in advance.

  Hey Buddy,

  If an application load the CPU and the GPU it s normal behavior that the fan rotates and probably on top level so it s high usage. So don t you worry because everything is normal. The fan protects the equipment from overheating.

  What you can do is updated Google Chrome and Flash Player. Also try to use the most recent version, they also contain security updates.

  Last but not least, you can change the cooling method in the power management Windows (change the power plan settings). If you have installed Toshiba Value added Package, you can choose between optimized battery and a maximum Performance. Select optimized battery and fan activity will be less.

• Satellite Pro A10 - how to restore power management

  I'm running a little used by Satellite Pro A10 as a substitute for a sick office and trying to improve performance after the installation of some essential software.
  It seems you accidentally disable the Toshiba power management function - when I click the icon on the Toshiba Console there is no response.

  Power management seems to retain its previous setting, however, and I find myself with no control otherwise.

  Any advice on how to restore this function on the Console?

  You can also try to use the system restore utility to set the operating system to the point of time at the beginning!
  Maybe it will work

• Satellite X 200 - no in BIOS power management tab

  I have a Satellite X 200 and I'm trying to access the tab in the BIOS power management, although no such tab exists. The reason is that I'm putting up a time of autostart. If it's any help, the BIOS is Phoenix TrustedCore V.2.10

  So I wonder where he is, or how to access power management

  Thanks in advance

  Post edited by: plainer

  Hello

  Why you need a time to auto start?

  Sorry, but this feature is not available. I never had a cell phone that has been able to set the automatic start time.

• Satellite Pro 4600 unable to use 128-bit encryption

  I have a Satellite Pro 4600 running Windows XP SP1 with the card WiFi PA0307U-1MPC. Installed all the latest drivers listed for the 4600. I can connect to networks using 64-bit encryption, but can not enter the 128-bit encryption. Is it possible to use 128-bit encryption?

  Hello.

  As far as I know that this unit is about 4 years old and at that time, it was impossible to use encryption 128-bit with this wireless network card and can be no change.

  Good bye

• Satellite L300-1AQ unable to connect to the WLan

  Hello

  I'm a novice at computers so any help would be grateful.
  My husband bought my laptop Toshiba L300-1AQ 5 days ago, I am trying to link up to my netgear router, when I look at my wireless network I can select my network as its signal strength excellent.

  But when I go to connect it just happens like windows cannot connect to my netgear Wireless association failed because windows did not receive response from the access point or wireless router.

  The wifi light is amber and when press FN + F8 the wireless is turned on?
  Please point me in the right direction im running on Vista Home premium.
  Device Manager my network card is showing the link of wifi wireless intel (R) 5100 that the device works properly.

  Any help please.

  Kind regards

  Shelley

  Hello

  The problem may be the router itself. Restart your router and try to connect again. If the WIFI network is encrypted be sure to use the right WIFI password.
  If nothing helps, please contact your internet provider. Make sure your router is good configuration.

• Satellite L300-1BW - can I use the recovery DVDs?

  is it possible to use the recovery DVD on my laptop TOSHIBA L300-1BW without any recovery / hidden data on my HARD drive?

  As I want to update my player running more space

  Hello!

  I don't know if I understand your question right, but you can use the recovery disk for your laptop on every time Mr. He s not depending on the partition or HARD drive.

  For example, when you replace the HARD drive, you can install the laptop using the recovery disk.

  I hope I could help a bit.

  Good bye

• Satellite L300 PSLB0A - impossible to use the Fn & Touchpad keys after installing XP

  Hello

  I just went down from VISTA to XP and setting based dirvers but there are a few problems.

  After I installed XP sp2, I installed:
  1 driver Chipset
  2 display driver
  3 sound driver
  4 Lan driver (include wireless)
  5 driver Modem (it's a software modem driver for toshiba)
  until this procedure, it seems.
  I installed the common module and do a restart then set up touchpad driver and Tablet touch power switch program.

  But the touchpad does not work.
  I also tried to install toshiba controls but he said 'It must implement the common module first' although I have implemented the common module.

  Wireless Internet, sound, display are OK now.
  But I can not use touch-pad and other function keys.

  Can someone give me a solution for these problems?

  I doubt that you can remove the common Module first because I didn t he find in Add & Remove programs.

  But as Akuma suggested to install the common Modules like the first!
  The common Modules is an essential application to be installed initially.

  You must also update the XP