Similar Questions

• In the System Recovery Options administrator password?

  Hello dear users of Toshiba.

  I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password.

  I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him.
  My problem is that I can't use recovery tool if I don't log in as an administrator...

  Can someone please help? Y at - it factory default password?

  Thanks to you all!

  Hello

  To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it.
  But first some basic information:

  Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option.

  To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue.

  So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• "The video file cannot be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again"when trying to publish a movie

  Original title: VISTA HOME BASIC MOVIE MAKER

  Hello

  I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not.  Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?

  Hello

  I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not.  Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?

  ===================================
  I suspect that the problem is the format of the music files.
  If you can convert them. Before you import into WMA
  Movie Maker, you may be able to publish.

  Format Factory free software can convert. MP3 files
  WMA... and can also join MP3 files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "Minimize the Image Recovery" since the recovery discs?

  the "reduced Image Recovery" is possible from the recovery discs? Installation win7pro from the recovery disks from HP on an SSD completely wiped for Elitebook 8560p.

  Not really something to see. From what I remember - was among other things - I have started from the disks and reduced has been one of the options. He didn't choose because I was doing a Factory reset for all restored partitions and laptop computer at State embedded. (I had already deleted the recovery partition & partitioned the hard drive for dual boot with Windows 8)

• How to ignore the images are no longer available for licensing?

  About 80% of the images I tried to examine are marked "Licensing for this image are no longer available." Is it possible to avoid wasting so much time clicking to select and clicking to accept that the image is not available? If there were one or two, I could live with it, but respond MOST of the images in this way, so it's a huge barrier looking for usable stock.

  Thank you

  Allen

  Hi Allen,.

  If you run through this new try clear the cache of your browser and then restarting him. Let us know if it does not help.

  EBQ

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• Example: Pavilion 15-n096st: I can't find the soft recovery option

  Hello. I would like to do a soft recovery to my HP Lalonde but I can't, in the past I have done several times but now I can not find.

  (1) I write recovery to start, then Manager of recovery HP appears, click it. But the following interface is very different. I can't find option softrecovery it.

  Want to help?

  Thank you.

  

  Hello

  Click recovery environment Windows--->, then the device will restart---> select Troubleshoot---> you can then select Refersh your PC (this will reset the unit without deleting data stored in it)

  Check the link for more information on how to start below

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/5401225/model/5443031/document/c03538721/

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• is windows 7 upgrade option still available?

  I had a computer built for me and it came with a copy of windows vista Home premium 32 bit and was eligible for see free windows 7. I have not found this upgrade of fre until now when I want to reinstall my operating system. is there a way that this can be bought out now that the promotion has closed?

  No - it's a limited time offer which was managed by the OEM and has been closed for more than a year.

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Unable to save changes to permissions on the Image File Execution Options.

  Updating to Acrobat Reader, 1406 error reported; Cannot write the registry...

  Later, I found that updates for Office 2010 are starting to fail, some are bleow;

  Update of security for Microsoft Office 2010 (KB2553353) 32 - Bit Edition

  Update of security for Microsoft PowerPoint 2010 (KB2553185) 32 - Bit Edition

  Update of security for Microsoft Visio 2010 (KB2553374) 32 - Bit Edition

  After having read and carried out the instructions in the article by Acrobat; http://kb2.Adobe.com/CPS/329/329137.html#main_Vista and Win 7, has not solved the problem.

  Using Regedit, I found that I couldn't change permissions to one of the inputs of the sub in the execution for the Image File Option.  The error message "unable to save changes to permissions on the Image File Execution Options.

  Even in Safe Mode with administrator privileges, the message is the same.

  Have surfed the net for the solution, but none.

  Would appreciate advice.

  Concerning

  Prabir Mittra

  Malaysia

  Hello

  If the steps described in the adobe article cannot be implemented because of the error, then you need to contact adobe for assistance because they would be able to guide better.

  Also I suggest connect you to the computer as an administrator and check whether you can perform the steps completely mentioned in article from adobe.

  If you need assistance regarding the office updates, look for error messages related to updates Office failed in the history of Windows update and post it back here.

  Cordially.

• NB500 - I can't do the system recovery

  Hello

  I got a nb500 Windows 7 starter and I cannot do a system recovery out-of-the-box.

  I tried "press 0 and power", the pc starts, but as long as I continue to press 0 nothing happens. When I release, it will continue to boot normally into windows. Also tried with f8, I can see the system recovery options, but there is no tool for HARD drive recovery there. I also used a toshiba recovery media Creator called program but when I start, it displays a message «there is no area of hard drive recovery»

  Any suggestions please?

  For some reason any there there no initial access to the recovery image.

  Either it is deleted or the partitions of HARD drive structure is changed and recovery tool cannot find the settings for the recovery image.
  Now, you have little problem. Recovery image installation will not work.

  You have two options:
  1 / you can try to install recovery disc original order of Toshiba - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  All readers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp