Redundant updates of Windows XP

Similar Questions

• Svchost.exe causing 100% cpu usage during the update of windows, even when disconnected.

  I recently had to re - install windows xp on a new hard drive for replacement. My version of xp home edition, SP2 OEM installation disc. (This is ith group included IE6)

  Once installed and running, could access windows update.

  Read all the threads associated etc. and installed SP3, disc after downloading microsoft on another pc. Installed after three trys, first two caused various mistakes, but third attempt seems OK!

  I've also updated the IE6 to IE8, as some sites obviously did not work properly with the older browser.

  Now go do the automatic updates, or log for manual updates... BUT!

  During the process, my cpu fan comes on fast and permanently! The CPU usage is showing that 100%, pc slows to crawl, the mouse becomes slow etc.

  This has never happened before on this machine before you reinstall clean, he had already automatically updated to SP3 and went very well, it was some time ago, before the failure of hard drive, and it has never had this problem!

  Only since having to do a cleaning manual update and re - install.

  The culprit seems to be svchost.exe, once it is used by the update, running the cpu at 100% and continues to do so EVEN after stopping the service, until I manually stop with the Task Manager!

  The svchost.exe instance showing a high is use: SYSTEM.

  According to the files of help here, it is a known issue and a fix KB927891 was issued for SP2, but this should NOT be necessary for SP3, and in fact difficulty used to perform anyway under SP3!

  Ideas for a guy to fix?

  I appreciate the support for XP runs out quickly, and after this update of windows will be redundant, but in the meantime it is always useful!

  Also if I turn off the automatic updates, how can I stop this annoying popup warning bubble?... I can't live without updating, but this bubble nag drives you nuts! :)

  OK just a update, now running cool and 100% auto update and manual update... How? I hear you ask...

  Well I had a beer and a reflection and came to the conclusion, it must be 'order' in which I updated the clean installation of XP.

  Origin, I loaded the old OEM disc new hard disk, loaded the drivers etc, then stop at windows update for updated files.

  Who told me my old incompatible browser and suggested an upgrade.

  I downloaded and installed IE8... still no joy, reading the forums comments I downloaded and installed SP3... which SEEMED to work, BUT then all the hassle of cpu to 100% with the automatic update and updated manual on the windows don't update site!

  So I just gritted my teeth, formatted the drive, another OEM of XP Home Edition SP2 installation loaded the drivers, installed a copy saved to SP3 and after restarting, THEN installed a saved copy of IE8 and THEN trotted off the coast to the windows update site... low and behold, it the connection without problem, did a search, and required updates appeared on the screen without delay all 123 of them...! :)

  Did the updates, restarted and everything was fine, updates automatic in market and left the machine, after about 30 minutes appears the yellow shield, and it downloads a couple more update files without problem.

  All this time I followed the via the Task Manager CPU usage and the strange spike waited 100% apartment, it was on average from 5 to 20%!...so a great improvement has this effect, by simply changing the order of the updates installed from the original! SP3 IE before IE8.

  May not work for all have to do a clean install because of the HD failed, but its worked for me, and I am once more a "happy bunny!

  Dave was soon.

• Unable to download the update for Windows Vista

  Try to download the update for Windows Vista 28. MB (big enough file) download also refers to "KB980248.  He continues to show "failed" and "errors found." 'code 80070017' never had problems to download the updates of windows before.

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  The file is damaged or you need clean temporary files on the hard drive, etc.

  Have you tried a manual download of the update in question?

  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• updated for Windows FF20.0 8 64-bit up to date now, I have 4 MB ea puts cached in C:|users\lee\AppData\Local\mozilla\firefox\profiles\tfw6yc7z.default\CACHE_1_

  updated for Windows FF20.0 8 updated 64-bit
  Now, I have 4 MB ea Caches
  C:|users\lee\AppData\Local\mozilla\firefox\profiles\tfw6yc7z.default\CACHE_1_

  C:|users\lee\AppData\Local\mozilla\firefox\profiles\tfw6yc7z.default\CACHE_2_

  C:|users\lee\AppData\Local\mozilla\firefox\profiles\tfw6yc7z.default\CACHE_3_

  C:|users\lee\AppData\Local\mozilla\firefox\profiles\tfw6yc7z.default\CACHE_MAP_9

  I use CCleaner to remove them, but when I run Firefox, they reappear

  Does anyone know what here?
  and what they are for?

  Thank you

  Thank you jscher2k

  I'm on automatic update of FF if previous version 19. ?

  I wanted to just make sure that it wasn't malicious activity

  Thanks for the reply

• Where can I download Apple Software Update for Windows 7?

  Where can I download Apple Software Update for Windows 7? When update to iTunes, it appears "there is a problem with this Windows... "and I tried to fix Apple Software Update, but cannot find the .msi. file, I need to install it again.

  See this tip for the user of one of our colleagues in the community:

  "There is a problem with this Windows Installer package... "the error messages when installing iTunes for Windows

  See you soon,.

  GB

• HP Jet 7: Flow HP 7 tablet update to Windows 10 locked in the start cycle

  A few days ago my Tablet has started the update of Windows.  It was a large download and took all night.  I had space on the micro SD for her card.  He is now stuck in a boot loop.  Start HP logo appears, the circle of dots below.  Then the screen turns white and a box appears at the top of the screen, in white.  Resemble East should have written in it.  The screen turns off again and a message appears at the bottom of the screen: "restore your previous version of Windows...". ».  The screen is blank and the cycle starts all over again.  What can I do?  How can I get it to a version that will work?  I had no backup.  Is it time to juice throw it in the trash?  Is there some kind of storage medium, that I can use to retrieve Windows 8.1?  I don't like trash, but that seems to be my only option now.

  Use the media for Win10 32 bit tool and try again 10.

  Windows 10

  Its free to download. If you already have your PC set updated to 10, then its free to reinstall.

  Download on another computer and create the USB support.

  It works on my Tablet 8 Stream. I think it was just a fluke and it will work for you.

  No need to get media 8.1 with Bing , unless you just what to have on hand.

  But if you don't want to go back, you need to get that from HP. Microsoft does not offer a download for this particular operating system.

• HP envy 15 notebook PC: Beats audio not available after update of windows 10

  Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

  How can I get it back?

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• HP Pavilion dv7-6163: audio Beats went after update to windows 10

  I've updated to Windows 10 and the Beats Audio that I had on my computer has completely disappeared. Now my speakers audio seems very low and has absolutely no low range. As an audiophile, this sounds like total garbage and I want Beats Audio back!

  When I got hp forums said to check the section software and drivers website. When I found my specific computer model, the page said "this portlet unavailable." I don't know what to do or where to find the drivers for my computer model. If I'm screwed? Is there anyone out there with the same computer model than me who has Beats Audio for Windows 10 driver? I feel like I'm grabbing at straws here.

  Hello:

  See if installing this driver solves the problem.  Restart the PC after the installation of the driver.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Satellite S50D-B - TouchPad does not work after update of Windows 10

  Hello

  Just bought a S50D-B Satellite last week. Comfortable with technology. Updated to Windows 10 (3rd I did on the machine). New laptop is the only one to give problems. Tried allowing in settings - seems to be gaining 10 Auto turns off the device, which is strange. Indeed, it works (somewhat) with the exception of the buttons left and right. Tried to reinstall software momentum but no change. Any ideas?

  Thanks in advance,

  Peter
  There may be only a Highlander (1timothy 2:5)

  The issue has been resolved as you can read above:
  the ELAN touchpad driver update is released and it seems as well as other updates for Windows 10.

  But of course, MOMENTUM software/driver must be installed in the case to receive this update!

• Updates to Windows on the Satellite P845T-108

  I just bought a new P845T-108 Satellite with touch screen and Windows 8.

  While I am expecting to receive a large number of Windows updates, I seem to have problems to install the. Often it is said there are 103 updates, if I click to download, which takes forever! Then he said: which install also takes a long time. At the end of it tells me to restart. what I'm doing. Some facilities occur but the message Failed - reverting changes.

  Is this good?

  Hello

  In my opinion, this is Microsoft related question to verify please what Microsoft write-http://support.microsoft.com/kb/949358

  In my opinion, you should follow:
  -If you can start your laptop OS start and create recovery media first (image backup recovery)
  -install the recovery media using HARD drive option or created a support of recovery-http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  -After doing this, you will have good rework plant and OS parameters
  -disable the automatic updates of Windows. Do manyally after you ve been informed of available updates
  -do not optional updates for some updates of available drivers
  -a list of important updates and install only a part of it
  -After restarting the laptop computer do it again.

  You know that's not easy to say what was wrong with the updates Windows. Just, without panic. ;)