Reentrant PtbyPt increment

Similar Questions

• Setup for WIFI calling on the iPhone 6. Cellular data off the coast. Why still increment minutes on cell when outgoing calls over wifi?   How can I prove that I actually use wifi?    I tried to turn airplane Mode to isolate the wifi connection only, howev

  When you use the wifi calling, cellular minutes incrementing always?   WiFi calls = wifi = data cell = off

  Also tried to turn the airplane = mode on. How to track where call is go wifi or cell phone?

  Thank you

• Incremental or differential time machine?

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  http://pondini.org/TM/works.html

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• My new Macbook Pro backup in a time Capsule with 2 iMacs. After the first incremental backup but backup every now and again he returned to the backup of the entire drive, why is - this

  My new Macbook Pro backup in a time capsule, as well as 2 iMacs. After the initial backup, it seemed incremental backup but from time to time, he performs a full backup why, is it?

  time to time, she performs a full backup

  What evidence are you using to decide that she performs a full backup?

• Server gave the incremental number of volume

  After the upgrade to the latest version, the server has added a number of incremental volume name in all its parameters.

  So my Cache files are on/Volumes/1 Server / server function, even if the disk is only named "Server."

  It seems to work but I don't know why he did it, and I don't want it to happen again. It can affect things like backup locations.

  No idea how to restore it without messing up all my settings?

  This kind of problem is most typical when you have an external hard drive or a second partition or volume on your drive internal. What can happen sometimes, it's when the Mac is stopped or restarted it can miss things neatly up to: basically, it leaves an entry in /Volumes which should normally be automatically deleted.

  When the Mac then starts and goes up the different volumes, he sees the previous left on entry and rightly then adds a number to get around this, to make it unique.

  I would therefore use Terminal.app and the following command

  ls-l /Volumes

  and tell us what is indicated.

  Some server configurations may Mac came with two players initially and both can have the same original name.

  Another possibility is that if you have already used a RAID1 configuration which is mirrored in the volume of server and this RAID broke, and then risk copies of the disk server being listed.

• After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward.

  After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I could do those before the update. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward. I tried this on Netflix and Hulu with similar results. Apple TV restarting is not to solve the problem.

  Maybe a bug in the new version?  Does anyone else know this?

  Thank you!

  Many people complain when they reach around in the dark watching a movie they press and cause the movie ff or rwd.

  I think that this version tried to improve the situation by requiring the user to press and release the button then slide as formerly.

• backup incremental simplesave

  HP SimpleSave backup software performs automatic incremental backups?

  According to the manual page 1 ' backup automatically changes every time that the computer is idle for 5 minutes. This happens if the SS drive is attached and powered. Page 5 "If you unplug your HP SimpleSave drive, just plug it back in and run HP SimpleSave by clicking on the icon of the application HP SimpleSave.» The software automatically backs up all the changed files and new files since your last backup from your computer to your HP SimpleSave drive".  http://www.HP.com/CTG/manual/c01824301.PDF

• READYNAS using Readycloud Desktop App - incremental backup?

  Hi guys,.

  Have been using my ReadNAS for some time and it is great, just recently tried the application backup on ReadyCloud and the conclusion that it is always indexing or download.

  Just test it with a single file that contains the data of 6 GB. I wish a backup where only files updated the incremental was saved but it seems index of all of the directory and then download the entire dam every time thing!

  Am I missing something here?

  I use Windows Desktop App 10.

  If the ReadyCloud desktop application can't make incremental backups, to suggestions for an alternative?

  Thank you.

  Of course, just used Windows file historical, not good for off site however as a NAS device is in the same office, it is fine for now.

  See you soon

• The BIOS updates are incremental?

  My laptop Pavilion 14-n038tx and this is my current BIOS:

  BIOS information
  
          Seller: Insyde
  
          Version: F.21
  
          Release date: 08/08/2013
  
          Address: 0xE0000
  
          Runtime size: 128 kB
  
          ROM size: 4096 KB
  
          Features:
  
                  PCI is supported
  
                  BIOS is extensible
  
                  BIOS shadowing is allowed
  
                  Boot from CD is supported
  
                  Selectable boot is supported
  
                  EDD is supported
  
                  Japanese floppy for NEC 9800 1.2 MB is supported (int 13 h)
  
                  Japanese floppy for Toshiba 1.2 MB is supported (int 13 h)
  
                  services of floppy 5.25 "/ 360 kB are supported (int 13 h)"
  
                  5.25"/1.2 MB floppy services are supported (int 13 h)
  
                  floppy 3.5 "services / 720 KB are supported (int 13 h)"
  
                  3.5"/2.88 MB floppy services are supported (int 13 h)
  
                  8042 keyboard services are supported (int 9 h)
  
                  CGA/mono video services are supported (int 10 h)
  
                  ACPI is supported
  
                  Legacy USB is supported
  
                  BIOS boot specification is supported
  
                  Targeted content distribution is supported
  
                  UEFI is supported
  
          BIOS version: 15.33
  
          Firmware revision: 29.35

  I saw the download of the product page, and there are a lot of BIOS updates since then. I would like to know if I only need flash later a (previous updates contained) or flash of this current one by one (incremental) version?

  The latest version of the BIOS is normally a roll-up of all previous updates, so no need to do all of them.

• Can I probe a member of class reentrante clone dynamically shared a reshipment vi?

  Please, there must be a way.

  Currently, I am forced to change the execution not reentrant VI, to debug and then go back to running reentrante shared clone.  Of course, there is a reason, so it's not ideal I on re-entrant execution.

  Any ideas?

  AnthonV wrote:

  It seems there is no way to probe an overloaded dynamically dispatched Member vi if it is reentrant?

  No, it's easy probing such a VI, If you can open the front panel.  You cannot open the FP in the usual way, but there are several ways to do so.  Putting a breakpoint in the "original copy" of the VI will also breakpoints in clones, forcing them to open their public Service.  Also, try clicking the Subvi and selecting the menu option "call Subvi Setup...". ', then 'See the façade when it is called' (or do it for all the clones in the VI properties).  You can also use debugging tools "Step by step" to "enter in" the Subvi call.  And VI master, you can select "view > navigate relationships > incoming points" to open clones.

  Additional caveat: unless your on in real time, in which case ur stuck.

• cDAQ-9178 & NI 9401 - ASM: incremental Rotary encoder works is not beyond a certain frequency

  I use a chassis with a NI 9401 DIO module 9178 cDAQ.  I'm trying to convert the output of a rotary incremental encoder ASM (in radians) to rpm.

  Sensing head (PMIS4-20-50-240kHz-TTL24V-Z0-2M-S)

  Snap ring (PMIR7N-20-50-M-20)

  The encoder outputs 2500 pulses per rev (output 5V TTL).  The maximum speed which will see the encoder is 2800 rpm, which is equivalent to 2800 RPM * 2500ppr/60 = 116,667.67 Hz in terms of frequency.

  Since the NI 9401 of the operations specifications:

  Maximum of the input signal switching frequency by the number of input channels, by channel

  8 input channels... 9 MHz
  4 input channels... 16 MHz
  2 input channels... 30 MHz

  I use only 1 channel, so I'm assuming that the 9401 should be more than capable of handling the 116kHz which the ASM encoder is spit.

  Everything works fine until about 2100 RPM (~ 87, 500 Hz) but then I begin to see a drop in rpm, followed by a flattened behavior, then a slight increase. But never more than 2100 RPM.  Our test unit is inspected for other reasons at the moment so I can't produce a plot of the behavior (I can reupload later).  I think this must be a matter of aliasing with the meter or something of the sort.  I have a digital filter set in place with a minimum of 4.0E pulse width - 6.  It is two times smaller than the width of minimum pulse at a frequency of 116kHz (0.0000085714).  I don't think this should have an impact on the calculation.

  Any suggestions? This value of RPM is essential to our application.

  Thanks in advance,

  -MB

  brown_ktr wrote:

  I have a digital filter set in place with a minimum of 4.0E pulse width - 6.  It is two times smaller than the width of minimum pulse at a frequency of 116kHz (0.0000085714).  I don't think this should have an impact on the calculation.

  A 116 kHz frequency, the period is ~8.57 us, but the pulse width half duty cycle of 50%.  Ascent/descent time factor, and it is quite possible that 4 US is too long for your encoder signal.

  The shape of this graph supports this theory, if we consider that there is variation in the exact pulse of each encoder pulse width.  The shortest pulse is ignored when the filter starts to kick in, and the speed of ROTATION increases pulses longer and longer are ignored then as well.

  Try to decrease the minimum pulse of digital filter (US 2 or even 1 US) width and see how it goes.

  Best regards

• 'Variance PtByPt.vi' generates values of negative values for some input

  With certain sequences of input values the Gap PtByPt.vi can generate negative values. It is because of the precision in calculations.

  Because it is very common to calculate the gap by taking the square root of the variance, this behavior can take you by surprise because the result will be Nan and not almost 0 you expect. According to the data, this may be frequent or very frequent. In general, a nuisance to debug.

  The remedy is simple: take the Abs() before the square root value. A vi that demonstrates the case is attached.

  I would suggest to include this correction (or similar) in the "Variance PtByPt.vi' because it gives rise to unexpected and hard to find errors.

  By definition - variance cannot be negative.

  

  

  CAR 446514 discussed in this thread has been corrected in LabVIEW 2014.  For a more complete list of bugs fixed in LabVIEW 2014, see 2014 LabVIEW bugfixes. You can download a copy of LabVIEW 2014 evaluation at http://www.ni.com/trylabview/ or if you have a previous version of LabVIEW installed and an active subscription to SSP, you will be able to download the latest version of LabVIEW through NI Update Service.

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments | Certified LabVIEW Architect

• How to increment the index of row/column in multi-column listbox

  Hello

  I developed a program in which the multicolumn list box values are read and forwarded to another mechanism. To read specific values in the list box, I used index table to retrieve the value of a particular cell to the instrument.

  Allows, for example if I want to run the VI several times and I want to increment the line index whenever the tracks VI as well as for successive runs, the values of the next level of lines are read.

  For example. I have the following listbox

  HAD Vd Vg

  1 0.3 0.2

  2 0.4 0.6

  So for the first round, based on the index which I note the listbox can read 0.2 and 0.3 and assume that if I run this VI for lets say 2 times during the 2nd time it should read 0.4 and 0.6 instead of 0.2 and 0.3.Is it is it possible to increment the line/column index automatically? Please help me because this is the last step of my project.

  Thank you

  Robin

  Your VI runs millions of times per second and elements within nanoseconds. You need to prevent this.

  Here is a quick modification that goes to the next line, every time that you run the VI again and again when he's run out of items.

  It might give you some ideas...

• Increment and decrement

  I want to do a simulation of increasing numbers and decrements up to a point. Let's say that I start with a constant of 10. I want to increment this 10 until it reaches 50. When he reached 50, I want to decrement, until the return to 10. And from there, it goes back to 50 and so on.

  I'm new to LabVIEW, and by looking at a few examples, I can do the part of the increment. However I can only stop the simulation when he reached 50, and it is not I want.

  Can someone help me with this?

  See attachment.