Ref FPGA type-def lost connection when moving to another computer

Similar Questions

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• Changes in font size in the menu title when moving to another submenu!

  Changes in font size in the menu title when moving to another submenu! How to solve the problem?

  Thank you.

  Bruce

  Set the rollover State to be identical to the normal state.

• Eth0 lost after moving to another computer

  Hello...

  Ubuntu 8.04 server performed a vmware fusion 1.1.1. Then I copied it on another computer with vmware fusion 2.0.

  Now the Ubuntu has lost its eth0. I tried upgrading the virtual machine of the menu item. No help.

  $ sudo /etc/init.d/networking restart

  eth0: ERROR while getting interface flags: no such device

  SIOCSIFADDR: No such device

  $ifconfig; shows only lo

  Any suggestions?

  When you run the virtual machine for the first time on the new system, we asked you if you moved or copied the VM.

  If so, what did answer? (Note: you must have answered "Moved").

• the documents appear to be damaged when sent to another computer

  The standard acrobat xi, I have problems when sending files to another computer using a USB stick/drive. The documents that I try to send each have a header and a footer and security has been removed completely. When I put it on the usb/disc stick it presents as a shortcut but still opens on this computer. Then when I put in another computer and try to open the document it goes back to the originial document before that I edited, or it happens that the file is lost and can not be found. All that I want is the header and the footer in the document and security deleted so I can send files to people without this problem.

  I've never used, so I don't know what he does.

  Instead of this, just copy the files in the same way you would copy them between folders on your own drive.

  Open the two folders in Solution Explorer. A display of the PDF file.

  A F: showng

  Drag from one to the other.

• Y at - it a command to 'lock' clips to prevent them from accidentally move on a frame or two when moving to another track? (i.e. 'shift' in Avid?)

  When I edit a show, I will of course wind up with 3-4 channels of video at my rough cut stage. But then, for the final cuts, I always need to move all that there is only 1 video track. I have to do this, just select and drag down clips and cross my fingers that the arrows 'snap' is accurate and that's not really breaking a clip at random a few images. (Sometimes there will be a random audio clip on track 12 Let's say what happens to have a cut off images that first decides she wants to align, which leaves me with flash Gogo images unless I zoomed down to each clip... that is annoyingly time!) For example, in Avid, you can hold the 'shift' button you move clips up and down any number of tracks. This is particularly useful when you do a half hour or hour long show and you can just select any given track and then hold SHIFT and probably know that they are all moved down perfectly and not accidentally moved on any amount of images. Sorry for the explanation too, just can't think of how real this feature is called!

  I don't think there is, you can put in a request to feature here:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  However, as an alternative, you can select the clip and then move vertically only (up and down tracks) the option of keyboard command top or option + down arrow.

  MtD

• Text becomes overset when moved to another object

  I'm trying to understand why every time I have to move suddenly, a text box on another object the text becomes overset and disappears.  If I move the object or the spread entirely, the text returns and seems normal.  I tried to place the file, copy and paste the file, copy and paste the selected text, move the text box in a separate layer, check the order to ensure that the text box is on the top, but nothing seems to work.  Any thoughts on why this is happening?

  The other object's wrapping applied...

• Site looks different when editing on another computer

  Hi all

  I have Adobe CS4 on my laptop and created my Web site on this machine. A co-worker has also CS4 on their machine. I downloaded our website to their machine so that the person can do some changes.  However, when I open a page on their site machine seems all wrong. The divs are not published where it should and things don't align.  I downloaded the entire site (css files), but it's like they css is not connected.  Is there something special that needs to be done on the computer of your colleagues?

  Thank you

  Chris

  No, dreamweaver is the perfect Companion for making web pages. Its when inexperienced amateurs build a site and then get stuck. Through just a couple of the posts in this forum and you'll see what I mean. DW is great for people who know how to use it. A lot of newbies is on a web site or download some model and then all of a sudden they're in over their heads

  Users need to take a test html and css base before you can purchase/download a model online. They end up right here ask questions even when

• MESSAGE INAPPROPRIATE WHEN I TRIED ANOTHER COMPUTER REMOTE SUPPORT

  It worked fine for a long time, however, I think that someone "messed with" my computer.  When I try to do support remotely, I work in tech ctr, anyone I invites to help receives a message of F U on their computer.  How can I stop this?

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  They will help you in the Vista Networking Forum above.

  See you soon. Mick Murphy - Microsoft partner

• Hurts when I added another computer

  I currently have a WRT54GS version 6.  This unit worked well for 2 years.  I bought it for my laptop.  I recently installed a Linksys wireless receiver in an old desktop computer.  I used the option of easy setup on the second computer, which asked me to push the "Cisco" button on the router.  The second unit of office now works fine... but my laptop does not start on the wireless signal (even if she shows that she receives the signal).  My daughter portable computer has the same problem.  The two laptops worked very well before the "quick installation".  The two laptops they are reciveing a "excellent" signal

  How to get back to the old settings?  After the "quick installation", I noticed the reconfiguration has also changed the name of my network (the new name is Linksys_ses_59310).

  Thanks for your help...

  Trail

  Thank you!  Chalk, it went up as resolved... through the steps Klatch.  Even so easy a seller (yours truly) could do!

  Trail

• Lightroom moving to another computer

  I have lightroom on my laptop but you want to put it on my new pc, how do I do this?

  If you want to migrate your catalog, http://helpx.adobe.com/lightroom/kb/catalog-faq-lightroom.html

  otherwise, simply install lr on your new pc.

  If you no longer want on your laptop, disable it (help > deactivate) before uninstalling.

• Problem of jQuery in Dreamweaver after moving to another computer

  Hey guys, I made my first website with Dreamweaver, for my own media production company. Since I have a new computer that lightbox is not working properly, as it did on my old laptop. I just transferred my computer on my new Web site folder and have already checked every link, but I can't seem to find what is wrong. Please take a look at my problem: http://www.timperry.nl/Photos.html it seems to be a failure of the animation. All pointers are much apreciated!

  See you soon!

  Tim

  www.timperry.nl

  www.timperry.nl wrote:

  Since I have a new computer that lightbox is not working properly, as it did on my old laptop. I just transferred my computer on my new Web site folder and have already checked every link, but I can't seem to find what is wrong. Please take a look at my problem: http://www.timperry.nl/Photos.html it seems to be a failure of the animation. All pointers are much apreciated!

  You must have changed something since the transfer from one computer to the other. Any transfer would not have affected how the site works.

  Take a look on the below is the code which is located in thesection of your page, specifically the tag div {background-color: 000000 ;}} In my view, that has been added since you transferred it. If you delete this then animated works.

  Change this:

  To do this:

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• I put a synchronization and copied from bookmarks to another computer I give to my grandson. I deleted several bookmarks that were meaningless to him. I didn't turn off sync on my computer and now have lost most of my favorites. I can get these?

  Recover lost bookmarks after synchronizing to another computer

  Try to restore the bookmarks from the most recent backup of JSON in the bookmarkbackups folder that has them.

  • Bookmarks > show all bookmarks > import and backup > restore > choose file
  • https://support.Mozilla.org/KB/backing-up-restoring-bookmarks
  • http://KB.mozillazine.org/Lost_bookmarks

• LabVIEW FPGA. Where should I put the custom controls - or type defs in a project

  Hello

  Maybe this is a stupid question - but I'm a little confused on where within a project I should put the controls (or type defs) used in FPGA screws.  If you put in the bit "module FPGA" project, so they come up as "dependencies" - as if they are not in the project within the project when you read/write values in the target FPGA.  Also, it seems that if you copy the project to a different location folder then the FPGA vi can be distributed in a way that she needs to be recompiled - even if you don't change anything - that's not cool if it takes an hour or two to compile.

  I had the controls in the external project for awhile - but seems not ideal from the point of view modular programming, and also, it seems that it may also cause the recompilation unnessary - although perhaps less often that put them in the FPGA subproject.

  Any thoughts?

  I've seen the same behavior and it is a fact that the code must be recompiled if you move a project even if the FPGA code is unchanged. From my point of view, it's a real BUG. This is independent of any file source or target FPGA.

  The other point of your question is not clear relly. Of course, you will get the dependencies if you place the necessary files outside the structure of the target project. But I see no problem to reference them twice because it won't double the source itself. So I suggest to refer to these files several times in the project structure. Actually I'm doing this because I manage a project file LV with different targets CRIO where the complete code for the target FPGA is double referenced under each target.

  It may be useful

  Christian