Reference Dell 3115 scan to computer on the network

Similar Questions

• HP Deskjet 3050: Hp Deskjet 3050 how scan from computer to the printer?

  Since I can't print

  I was wondering how I could scan as to place the paper and scan from the computer?

  Isn't this possible?

  Thanks for the reply

  Sabrina33 wrote:
  ... I was wondering how I could scan as to place the paper and scan from the computer? ...

  Hello

  No, you cannot scan from computer to the printer. You have to put original on the glass and you can use the HP scanner on computer software to scan and save a document/photo scanned on computer.

  My question: do you have installed the software and driver on your computer yet? You should do this first.

  Kind regards.

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• -"Save your computer on the network" message after logon

  original title: connect to a modem

  When you use my model, I connect and my user id gets checked and it connects but I get the message "Reistering your computer to the network" amd he block my computer

  Hi JMG_53,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state from the link to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  The modem does not work and cannot open the "Network connections" window after you unplug and plug in the modem several times when a PPP connection is established in Windows XP

  For reference:

  In Windows network connection issues

  Windows wireless and wired network connection problems

• Writes a text file from a network computer to another computer on the network.

  It is possible to write a text file from a computer on the network to another computer on the network through labview without using FTP?

  Hi bebo_lm,

  It depends on how they are connected. If you have a 'normal' access to the pc and you can write on a hard drive of the other computer, you can use the writing functions of files or the copy of the file. If they are not connected like this, then you need another service. Why you do not use FTP?

  Mike

• another computer on the network is using the same IP address that your computer uses. Each computer on a network must have a unique IP address. To resolve this problem, run Network Diagnostics

  another computer on the network is using the same IP address that your computer uses.

  Hi johnnyredd

  
  1. is connected to a domain or a server computer?
  2. what operating system is installed on the computer?

   

  You can refer to the link below and check if the information provided will help you-

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-there-is-an-IP-address-conflict-message

   

  Check out the link below to identify the operating system installed.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  I hope this helps.

• How many computers can network a drive on a computer on the network using Windows XP Professional?

  How many computers can network a drive on a computer on the network by using windows xp professional

  Hello StephenM007

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• After I restarted the 2003 server, I get a message on two of my workstations the present on this computer and the network are different

  After you restart the Server 2003 due to a storm, I now get a message on two of my workstations that are different from the current time on this computer and the network

  Hello

  This question would fit better in Windows Server Instances.

• How to share the Media Player library on a computer on the network

  Original title: network and sharing of library

  Hello!!  Why doesn´t my library of hole windows mediaplayer with music from my home computers appear on my networkcomputer I get only a tiny part of it

  Hi VivekaNelson,
   
  -What is the operating system that runs on the computer on the network?
  -What version of Media Player is running on your computer at home?
   
  If you use Windows Media Player 11 for Windows XP, follow the steps in the article below and check if you can share the library together without any problem.
  Share your multimedia files

• Set up a home network on a Vista computer. Added my XP computer on the network. I can go on the internet but the signal strength is 'very low' 98% of the time.

  I used a d-link WBR-1310 Wireless G router to set up the network on my Vista computer.  On my XP computer, I used an adapter G USB 2.0 Wireless d-link WUA-1340.  Both computers are single room apart and most of the time, the doors are open, so there is no major obstacle to interfere with the signal.  This is my first experience on the implementation of a network and I must admit I was a little unsure of myself.  I don't know if I have some incorrect settings or if the problem may be something else.  It is a WEP secure network but I don't think that's the problem.  My XP computer on the network automatically signs as soon as it starts.  I am trying to download the LLTP from Microsoft on my XP machine, but I don't know if this could be the problem.  I've been struggling with this problem for almost 4 weeks and I'm getting very frustrated.

  PLEASE, I WELCOME ANYONE WITH AN IDEA OF WHAT I HAVE DONE WRONG, TO ANSWER!

  I'm sorry, but I read your post and I do not understand what the problem is you want to solve.  Is something that does not properly?  If so, please give us the details: what you're trying to do, what happens when you do that, the text of the error messages, etc.

• Network says it has detected another computer on the network with my IP address.

  Original title: ip addy

  My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take

  Try restarting your router.  It should solve the problem.

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• How to backup to a folder password protected, located on another computer on the network?

  Hello

  My OS is Windows 7 Professional. I have configured windows backup back up some of my files on a network share on a daily basis. There are people other than me who have administrator privileges on the computer on the network where my backup is stored. My problem is to password protect the share network folder as windows backup on it my computer can be done automatically. The computer where the backup is stored is a machine to windows server 2008.

  Any ideas or suggestions?

  Run the task as a backup operator, add yourself as a member of the backup operators group.  You can do this with the console "Users and groups", to open the console type lusrmgr.msc in the box run from the start menu.

  John

• Conflict error IP - 'another computer on the network has the same IP address as this computer.

  "Windows has detected that another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log. "I don't know what to do.

  I use Vista. How can I find my Windows system log?

  You're welcome Marilyn and thanks for letting us know. Please do not forget to mark this post which has solved this problem as the answer, when you are sufficiently comfortable that it is. Good navigation! :))