Reference Dell 5100 printer prints at all after installation.

Similar Questions

• Reference Dell A960 printer

  I'll upgrade to a new computer Windows XP 8.  My Dell A960 printer work with Windows 8?  I checked for Dell drivers and they are only available up to XP.  Windows 7 and Windows 8 are not available.

  Thanks for your help Pudgy!

  sevenzz,

  There is not any Windows 8 drivers for this printer.

  You can try this, it may or may not work...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell A960 All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If you do not install an antivirus program, Windows Defender will be the default virus program. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Dell 1600n printer goes offline after a stop / restart

  I have a Netgear 802.11 wireless router g with an HP 6840 printer & a Dell 1600n multifunction printer connected by ethernet cables.
   
  My different computers Macintosh, Windows XP and Vista have been printing of these priinters via wireless without problem for years past connections.
   
   
  I got a new laptop Lenovo T410, with Windows 7, in January 2010.
   
  Can I install two remote printers on that system and then print them via the wireless router.
   
  However, when I stop or restart the T410, the 1600n printer is "offline".
   
  I then have to 'Remove' this printer and re-install (via "add a printer") on the T410.
   
  It seems 'persistence' through a system reboot with the Windows 7 system.
   
  The HP printer works fine, the status "Ready" showing after a reboot.
   
  Both printers to work well after the closures and restarts on Mac, XP, and Vista systems.
   
  I use a static IP address for the 1600n and have the latest driver for Windows 7 from Dell.
   
  Another piece of data:
  During the process of "Add a printer", the HP printer is automatically detected, I select, and then add it.
  The Dell printer is not discovered, and I have to add it as a TCP/IP address, the "generic device', type"Dell network printer", then the specifically"Dell MFP Laser 1600n.
   
  Any ideas would be appreciated - Lenovo and Dell technical support will not help solve - suffice to say that it is a problem of Microsoft.

  This means that the machine has not received response to an SNMP request to the network adapter on the printer and when the frequency is not received the printer is marked offline.

  Uncheck SNMP on the Ports tab.   When SNMP is not checked that there will be no SNMP request to the device and the Standard TCP/IP Port will not mark the printer offline.   When the network cable is disconnected from the printer, the port monitor will always schedule the print job and work will go into an error state rather than not print until the device responds to the SNMP query.

  As the device supports LPD Printing Service, you might add the LPR Port Monitor, add to the LPR Port configuration / feature in Windows by using information provided by Dell.  The queue name, supported by the LPD service running on the network card in the printer is lp.

  There is also a command line utility when installing the LPR Port Monitor function.  lpq.exe

  lpq IPofPrinter Pei lp s

  This query and returns the status of the service on the device.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Internet printing using dell V505 printer problems all in one

  have dell V505 printer all-in-one. Some print orders follow completely, some don't at all, some printing course and stop all of NET applications. Whats up how much - what I do

  OT: printing problems

  Hi Judy,.

  Thanks for posting in the Microsoft community

  From your problem description, I understand that you are not able to get some tracking of print through completely controls. Please let me know if you do not experience this problem.

  What web browser do you use?

  I suggest you try the following

  Method 1: Some webpages specify exactly where text should print on the page. If the Web page you're printing specifies exactly where the text should print, Shrink To Fit will not work. You work around this problem by setting a custom preview before print scale factor. For more information about print preview, see
  http://Windows.Microsoft.com/en-us/Internet-Explorer/print-webpages#IE=IE-9

  Method 2: Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  
  Method 3: we will try to uninstall the drivers for the printer from the computer.

  
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://www.Dell.com/support/drivers/us/en/04/product/Dell-V505

  See also the links: Printing webpages: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-frequently-asked-questions

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Reference Dell V313 printer

  Hello - I'm a little late to the party, but I just found two updates (firmware, a driver for the OS deployment, both of 2012) on your website for my Dell V313 printer. Since these updates are of two years (can't get more recent updates), is it acceptable to go ahead and have them? Is there previous updates (since 2010, I got this printer) which should be made first, or can I go straight to the latter of 2012? Thank you.

  Redtail1,

  Can you copy, print, scan and fax without problems? If so, then do nothing.

  If it is not broke, do not try to fix it.

  Rick

• Reference Dell 2135cn print very light drum cartridge replace?

  I have a Dell 2135cn printer.  It is 1 year.  It has started printing very light copies.  I replaced the toner cartridges, but he continued to print light.  I have ordered that a drum cartridge and who took care of the problem.  That was 3 months ago.  Now the printer prints very light once again, without success, when I replace the toner cartridges.  Do I need an another drum cartridge?  Is it normal to have to replace the drum cartridge so often.  What else could be the cause of this problem?  Thanks for your help.

  I just had the same experience - called Dell technical support.  I use the replacement toner.  Even if my 2135cn is 3 years old, he apparently has a support life support phone.  In any case, the fix was to enter in the Setup, maintenance, admin, non Dell toner - be sure to what it gives 'On '.  My was not, and as soon as I changed it to, black printing went from barely legible to acceptable.

• Reference Dell photo printer 720 compatibility with Windows 8

  Is Dell photo printer 720 compatibility with Windows 8. ?

  You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

  It is not compatible with windows 8 - see THIS

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• Reference Dell M620 and M820 ESXi 5.1 installation

  I'm relatively new to VMware on Dell hardware. The closest thing that I believe to a custom image is 'VMware ESXi 5.1 update 1 Image Recovery"(http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=RD5JN). I assumed it to be ESXi 5.1 update 1 with favorite Dell specifc driver packages. I had planned to use this new installs feeling that it would include the latest drivers for my Dell M620 and M820s and would be preferable to base VMware image.

  1. It is the support for the installation of these blades?
  2. The description says « Ce ISO image should only be used to restore/reinstall VMware ESXi on image for SD Card/USB Key on the supported Dell platforms. »
     • I am confused by the specification 'only' restore/reinstall and not install.
     • Also confused by the mention of the only card SD and USB to the apparent exclusion of standard hard drives.

  I installed with it as a test and it looks good, but I'm uncomfortable with the description. I would be grateful for any additional information or insight to those who support ESXi in Dell stores.

  Hi vmproteau,

  Here are my answers to your question based on my experience. I have no experience with the M620 or M820 I manages around 240 M610, 60 R710, the R720 10, so I am familiar with Dells ESXi 5.1 servers update 1.

  (1) Yes, I would recommend using the ISO provided Dell printer if you are not familiar with creating your own package with the necessary drivers and firmware.

  (2) this ISO standard will include all drivers for supported Dell servers and some customizations of Dell and can be used for new installations regardless of the storage (SD, USB or HD Local) option. I would like to look out for is mainly to make sure that you update the firmware on all of your blades with the most recent available by Dell that ESXi is very picky with the pilot and also incompatible firmware Dell CMC with thanks to a few mistakes from time to time.

  Kind regards

  CROD

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• Reference Dell MFP printer not print.

  I bought a new Dell anything anbout one laser printer low there. I installed it. I can see the icons on my two computers. But when I try to print, either directly but through cable or wireless (I have a router which works fine), I get the error is "no printer error paper or. In addition, I could not send a fax - machine was sound and sending it came out with the error. Before this printer I used HP printer which worked very well. I'm not able to get any help either Dell or the vendor, Staples. I would much appreciate if someone can help me.

  Answer: * address email is removed from the privacy *

  Thank you...

  I have no way of knowing if you have purchased an extended warranty (or package), Staples and Dell.  If you have registered your Dell product online, you should be able to determine the status of your warranty by entering the number of serial number of your printer here--> http://www.dell.com/support/home/us/en/04
  This article explains how to find your serial number--> http://www.dell.com/support/contents/us/en/04/article/Product-Support/Self-support-Knowledgebase/locate-service-tag/Printer

  You had two icons for your printer showing in devices and printers, probably because one is for the USB connection and the other for the wi - fi connection.  Assuming you have an edition of Windows 7, follow these steps:

  • Open devices and printers
  • Right-click on your Dell printer icon, then select "printer properties".
  • Select the "Ports" tab

  One of the lines in the list of ports is highlighted and verified.  Look at the value in the "ports" column (if necessary, click and drag over the low vertical line in the header line to make the column wider).  If the value is an IP address (for example, 192.168.1.25), then this icon represents your wi - fi connection to the printer.  If the value is something like USB_001 or DOT4_001, this icon represents the USB connection (cable) to the printer.

  If your printer will work with two active connections (some printers will disable the wi - fi connection if the printer is connected via USB), then you must give these names separate icons so that you can choose whatever you intend to use at any time.

  I suggest that you are troubleshooting with the printer connected by USB (cable).  In this way, you don't have to worry about if you have the appropriate safety information to connect to your wi - fi network.

  Regarding faxing or incoming calls "answering machine" printer, the printer must be connected to a regular telephone line to send faxes.  If this is the same line that you normally use to make and receive calls, the portion of the printer fax is probably configured by default to answer all incoming calls.  There should be a setting somewhere in the configuration of the printer system to change this to never answer or answer only after a number of rings (which gives you a chance to answer a call with your phone).

• REFERENCE DELL 946 PRINTER WILL NOT PRINT

  DELL ALL IN ONE PRINTER 946 STOPPED WORKING JUST OUT OF THE BLUE

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to print a test page?

  ·        What happens when you try to print?

  ·        What application you use to print?

  As noted by Richard G. Harper, try to print the test page and check if the printer works fine or not.

  Method 1:

  Maybe it's that the printer drivers have been corrupted. I suggest you to uninstall and reinstall the drivers and see if the problem is resolved.

  Note: Uninstall the driver and the software that is installed on the system.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=PRN_ALL_A946&OS=WLH&OSL=en&CATID=&impid=

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

   

  Method 2:

  I suggest you to uninstall the printer and reinstall the system and check.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Method 3:

  I suggest you run the printer Troubleshooter and verify.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell 1133 printing not average page

  I just changed the cartridge in my Dell 1133 and is only printing and thumb to the left of the page and an inch and a half of law.  It's a very clean patch empty at the Center, as if someone has something photocopied without realizing the previous person had left a strip of paper in the Copier. I took out the cartridge and tried to distribute the ink more evenly, but nothing helped.  Any suggestions would be welcome.  Thanks in advance.

  Hello KKPB9213,

  Please review the link below user guide and see cleaning the printer to clean the LSU. If you still have questions try a different cartridge.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_printers_main/esuprt_printers/Dell-1133_User%27s%20Guide_en-us.PDF

  Kind regards

  Joseph E

  #iworkfordell

• Reference Dell v515w printer acts like it is printing, but there is no ink on the page

  I have a Dell Inspiron 5000 series and the v515w printer. I went to Windows 10 and if she is working for a short period until he acted like it was printing but no ink on the page. I switched to Windows 7 Professional and it still does the same thing. I uninstalled the printer and reinstall twice and still can't make it work...

  Hello Charlene,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem your printer does not print text on paper as there is no ink. The question might be if there is no ink in the cartridges. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  I suggest to check first the ink in the cartridges, and if possible, try to change with a new and see if it makes a difference. You can also try to clean the ink cartridge nozzles.

  If the problem persists, you can try the steps outlined in the methods mentioned below and see if it helps you to solve the problem.

  Method 1
  Try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  Clear printer spooler files and select the spooler service.

  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3

  To identify and fix common printer problems in Windows, including print errors, errors of spooler for printing and other issues that could prevent you from printing, see the article help.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Reference Dell V715w printer is supported on Windows 10?

  I'll upgrade to Windows 10. My V715w printer will work, or will I have to replace?

  Rick, I upgraded from Win 7 to Win10 today. I kept all my files and settings. The V715w worked immediately. Do not reinstall or change settings.