Dell 1600n printer goes offline after a stop / restart

Similar Questions

• C7180 HP printer goes offline when it is connected with the wireless network

  Hello

  I have a problem which seems to be common, but I can't find a solution simple 'step by step'.  So my apologies in advance for you who are technically much more advanced that I am and know that this has already been answered.

  I have a sony vaio laptop running Windows 7.  At home, I have a printer all-in-one HP C7180 I connected wireless on my home network.  FYI, I have a netgear wireless router.

  Once I have installed the printer on the network, everything works fine until I closed my computer.  On restarting, the printer is detected as offline by my laptop.  Now, my solution is to uninstall the printer and reinstall it.

  If someone would be kind enough to give a detailed set of step by step instructions on how to solve this problem, it would be much appreciated.  I read on the definition of a static IP address rather than dynamic, but I would need one together instructions if this is indeed the way to go.

  Thank you.

  Rich - desperate to finally solve this nuisance.

  Hi rich,

  As you mentioned that the printer goes offline after a reboot, please refer to:

  "Printer is off-line" Message appears on the computer and the HP printer does not print

• my continuous wireless printer going offline - how can I 'stabilize' the connection '.

  my continuous wireless printer going offline - how can I 'stabilize' the connection?

  Hello gerrie,.

  What I would do is put off the printer and the router so

  -essentially them turning off for about 10-15 seconds

  -and then feed the router back on waiting for all the lights turn on completely

  - and after that is back in the market I would re - turn on the printer and re-establish the connection between the printer and wireless network

• Wireless printer goes offline

  I have windows XP and a wireless Epson printer which worked for about 4 months.
  Lately the printer when I power the PC goes offline and I can't get it back on line unless I have reinstall the driver.
  I can turn off the printer on and outside, and it will stay online but if I turn off the PC and turn on the printer is offline.
  I can scan a document even with the printer showed offline, totally confused.

  [Moved from comments]

  Hi Scrollerpete,

  1. What is the model number of Epson printer wireless?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the Microsoft Fixit in the following article and check if this solves the problem.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: You can try following the steps in the link and check if it helps:

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

   

  Let us know if that helps.

• HP Office Jet Pro 8610: printer goes offline at rest - requires market power when the new document is pending

  Printer and all functions work fine.  However, lately I sent a doc to print who just sits in the queue.  When I look at the printer by clicking on the tray icon I sde is offline.  So I turn the printer off and back to get it on the network.

  I don't really have any options to change my home network and hope it is some of the printer which will avoid going offline like this, or a faster way so he can go online without turn off and on.

  That dot the 'A' and a passage of "T" by the first response:

  The printer model-

  HP Officejet 8610

  Detailed problem description-

  Printer goes offline without warning.

  New print job is in the queue showing the printer is offline.

  Must be able to market, leading to the resumption of the print job.

  Operating system on the computer (including the revision of the service pack)-

  Windows 8.1

  Method - USB, LAN, Wireless cable connection? -

  Wireless, same problem if DHCP or static 192.168.0.253

  Brand and model of router and modem? -

  BrightHouse Cable router/Modem: Arris, H/W version 6, Firmware 8.0.120

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  None

  If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? -

  WE

• M476dw MFP: M476dw goes offline after each print job

  My printer is only around the age of 18 months. A few days ago, it is taken offline after each print job. Message in the print queue dialog box indicates that the printer is not connected.

  The only way to print is voltage and send the print job after the re-start. But once the work is finished, it turns off online again.

  What is going on? And how can I solve this problem? Help, please.

  I'm on OS 10.11 on an iMac and a MacBook Pro.

  grandbob his

  So far so good. I printed TWO documents (woo - hoo!) and the blue wireless light is still on.

  I wonder why I had to do the restore anyway.

  I'm keeping my fingers crossed.

  Thank you very much

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Guard printer goes offline and create a copy of the printer

  Hello

  I have a printer that does not have very easily the first time. First time, I actually connected via usb first and then installed driver after. I then deleted and did the opposite way around. This seemed to work properly.

  However, it will work for awhile and then the printer will be displayed in devices and printers, but does not print anything OR a copy of the printer is displayed.

  I tried the passage of the printer with another of the same model and the question remains... so it doesn't seem to be a problem with the computer itself. It is running 32-bit win7. I also tried to change the printer usb cable and cable supply.

  So now when the present question, either on the printer market at least will get it print again... OR I need to go into print management and remove the printer and driver package and then restart and then reinstall the driver and connect... it works so perfectly for perhaps a day or two...

  The printer is a printer of labels Zebra with the latest driver.

  I have a second printer running on this machine very well (it was installed after the other printer).

  I wonder if I need to do a complete withdrawal (registry and all) of any trace of the printer to reinstall it?

  Go to your Control Panel Printers folder. Look for your printer. Right-click on it and make sure that it is set to "use printer online".
  Remember if your printer is turned off the power, it will show as "offline". When you turn it on it should automatically go back to 'online '.
  You can always change where I showed you.
  This should take care of it.

• HP 4200tn offline error printer going offline

  Original title: HP 4200tn error offline

  I have a new computer with Windows 7 installed.  I am having several problems with my HP 4200tn printer goes into offline mode.  All of the suggestions.

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest to see the link and try to run the Troubleshooter:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I suggest you to follow these steps and check if that helps.

  a. click Start.

  b. click on devices and printers.

  c. double-click the printer icon.

  d. in the new window that opens, click on the printer and deselect Use printer offline .

  Method 3:

  Check the link and see if it helps:

  Solve a problem

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=84028&TaskID=110

  Let us know if it helps.

• HP Officejet Pro 8600 Premium: Printer remains offline after standing start

  HP Officejet Pro 8600 Premium takes 30 minutes + to connect after boot or restart computer?

  Also when starting printer error message - cannot send faxes? (Fax complete info)

  It is a wireless setup. Phone line is AT & T U-Verse.

  Hi bunkyb43 ,

  Welcome to the HP Forums.

  I see that the printer takes a while to connect to the printer once the computer has been restarted or powered.

  I've seen this problem before and I could solve the problem by simply ensuring that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Once the printer is connected to the wall outlet, please use the power button to do a proper feeding cycle.  This will make a semi be able to reset the printer.

  I'll also give you a document ensuring that the fax settings are correct. Please click the link for "Cannot send or receive faxes".

  Write me back if you have any questions or concerns.

  See you soon,.

• Printer goes offline on its own

  My first Officejet Pro 8500 (A909n) has suddenly gone 'offline '.

  When I go to tools, network, Wireless Setup Wizard"the printer detects my network and joins it.  I print something without any problem, but later, when I try to print something else, she's still "offline".

  What else do I need to do this, it will stay online?

  I have a HP Laserjet 400 and an all in one injet 8600 uses Windows 8. One or two continue 'offline' at least once a week.  These computers are connected through an ethernet cable or wireless computers on network. When my count says that a printer is offline and I try to print from another computer on the network, the printer works fine. So for me, this problem is a computer problem and not a general printer problem.

  I found that in all cases, the my computer print spooler service was inadvertanly off. I don't know why this happens.  If you are using Windows 7 or earlier, press the Start button, type "services.msc" in the run box without quotes, and then press ENTER. If you use Windows 8 go to services.msc screen and startup type, and then press ENTER. This opens the Services window. Go down to the line that indicates the print spooler. Right-click on words and on the left, click on restart. It solves my problem.

  It turns out that when the computer says the printer is offline, it means that the computer cannot ping the printer. In my case, it's a problem with the computer itself.

• My dell 944 printer is offline, how can I do?, help.

  alignment page does and it comes up with offline.

  Hello

  Download and read the reference manual dell for your model printer from the link below

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  or contact dell support

  http://support.Dell.com/

  or ask in the forums of dell support

  http://en.community.Dell.com/support-forums/default.aspx

• Reference Dell 1815dn keeps going offline

  I have a 1815dn laser that works very well with my XP machines, but it has constantly disconnects when I print from my Dell laptop XPS M1330 Vista one. I talked to Dell support and thought that the problem has been resolved with a new driver, but not joy.  Someone knows how to get back to zero once it disconnects - and I don't just mean go to the average drop-down list and clicking on online use.  That is already set correctly - but it is always offline.  I have to say that it still works perfectly XP systems when the Vista machine cannot access.  Thank you.

  I had a similar problem, but with all the PC cannot print.  Just kept showing offline.  I came across an article which solved my problem, maybe it will for you too!

  Under the printer properties Ports tab, click on Configure Port.  Uncheck SNMP enabled state and click OK.  Of course, there was a change in how SNMP works with SP2.

• printer goes offline without reason

  Product - HP photosmart 2610 all-in-one

  Wisdows Vista 64-bit

  Printing error in the queue

  Default printer listed as offline and can't do online.

  Hi rmoe,.

  You can click on this link for a document that will help you get your online 2610 printer.

  You just need to select the option for windows vista.

• OfficeJet Pro 8625: Printer goes offline

  I recently buy a printer of HP all-in-one Officejet Pro 8625 at Costco.  I find that often, it disconnects and I must it turn off and restart to connect to the network.  Is there any solution for this?

  Hi there, you may need to assign a static IP address to the printer who, in many cases, results in a more stable connection. Instructions for how to do that are included in this link, as solution # 3.

  I hope that this information helps to solve this problem.

  Best.