Reference Dell EQL PS4100xv problem with MS SQL replication

Similar Questions

• Problem with Top SQLs report

  Hello

  I have a big problem with Top SQLs reports, when I generate a report of high SQLs, SQL, the value text is not end, I know that there is a "The SQL text size" setting on the properties of the agent (this configuration is also on the collections setting ' Ta maximum size in characters of the short collects text of the SQL statement is ") on the two options , I've incremented the value of 256 (default) 1500, but when I generate the Top SQLs postpones continue it problem, once the changes I restarted the agent but the problem persists, I generate the report on the different formats, but result is the same, could you help me please.

  Thank you.

  Best regards.

  I see this in support KB article https://support.software.dell.com/kb/109536

  "

  • Title

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Description

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Resolution

  • Resolution A DDB-3673 request improvement with Support software Dell to show the full text of SQL high in the report Top SQL for DB2.

    Workaround At this point you should be able to make a custom report by cloning the Top SQL existing and then customizing report. »

  I know that this is not the solution, more of an explanation and guidance on how to solve this problem by using customizations.

  Golan

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• What is the problem with my sql says invalid identifier

  CREATE THE TABLE PROJECT

  (proj # NUMBER (6) NOT NULL,)

  p_name VARCHAR2 (15) NOT NULL,

  p_desc VARCHAR2 (150) NOT NULL,

  p_budget NUMBER (8).

  CONSTRAINT project_proj PRIMARY KEY #pname_pk (proj #, p_name));

  CREATE TABLE WORK ORDERS

  (wo # NUMBER (6))

  proj # NUMBER (6).

  wo_desc VARCHAR2 (150).

  wo_assigned VARCHAR2 (30),

  wo_hours NUMBER (5),

  wo_start DATE,

  wo_due DATE,

  wo_complete char (1),

  CONSTRAINT workorders_wo #_pk KEY(wo#) primary SCHOOL.

  CONSTRAINT workorders_wo #_fk FOREIGN KEY (proj #)

  REFERENCES PROJECT (proj #).

  Workorders_wodesc_uk of CONSTRAINT UNIQUE (wo_desc).

  CONSTRAINT workorders_hours_ck CHECK (wo_hours > = 0).

  CONSTRAINT workorders_wocomplete_ck CHECK (wo_complete in ('Y', 'n')));

  Whenever you have an error message the best thing to do is post a copy of your session with your statement sqlplus output. Like this.

  I have no problem with your first statement regarding the syntax and semantics

  SQL> create table project
    2  (
    3  proj# number(6) not null,
    4  p_name varchar2(15)not null,
    5  p_desc varchar2(150)not null,
    6  p_budget number(8),
    7  constraint project_proj#pname_pk primary key (proj#, p_name)
    8  );
  
  Table created.
  

  Second table a problem that his tent to make reference to project.proj #. But the problem is that it doesn't have a primary or unique key defined in this topic.

  SQL> create table workorders
    2  (
    3  wo# number(6),
    4  proj# number(6),
    5  wo_desc varchar2(150),
    6  wo_assigned varchar2(30),
    7  wo_hours number(5),
    8  wo_start date,
    9  wo_due date,
   10  wo_complete char(1),
   11  constraint workorders_wo#_pk primary key(wo#),
   12  constraint workorders_wo#_fk foreign key (proj#)
   13  references project (proj#),
   14  constraint workorders_wodesc_uk unique (wo_desc),
   15  constraint workorders_hours_ck check (wo_hours >=0),
   16  constraint workorders_wocomplete_ck check (wo_complete in ('y' ,'n'))
   17  );
  references project (proj#),
                      *
  ERROR at line 13:
  ORA-02270: no matching unique or primary key for this column-list
  

  I defined a

  SQL> alter table project add constraint project_proj#_uk unique (proj#);
  
  Table altered.
  

  Now, the second table is also created correctly

  SQL> create table workorders
    2  (
    3  wo# number(6),
    4  proj# number(6),
    5  wo_desc varchar2(150),
    6  wo_assigned varchar2(30),
    7  wo_hours number(5),
    8  wo_start date,
    9  wo_due date,
   10  wo_complete char(1),
   11  constraint workorders_wo#_pk primary key(wo#),
   12  constraint workorders_wo#_fk foreign key (proj#)
   13  references project (proj#),
   14  constraint workorders_wodesc_uk unique (wo_desc),
   15  constraint workorders_hours_ck check (wo_hours >=0),
   16  constraint workorders_wocomplete_ck check (wo_complete in ('y' ,'n'))
   17  );
  
  Table created.
  
  SQL>
  

  My Version of DB's

  SQL> select * from v$version where rownum = 1;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
  
  SQL>
  

• Reference Dell technicians who work with Microsoft scammers?

  This morning (Monday, 24 October 11) I got a call from a Technician based in India, same scenario, as Microsoft already described here. How did get my phone no and name? Well, Thursday I contacted Dell that I got a problem with my computer, open the windows, the Dell technician says that he'll call me later and asked for my phone doesn't. He called a day later and I said that friends had fixed the problem, which was Friday. Well the first thing Monday morning, I have a Microsoft technician saying that my microsoft certificate had expired and my computer will not work unless I have renewed the certificate and I pay £££. Isn't the air very coincidential? I will never buy Dell products still once, it seems that they pass the information to the crooks or they are scammers themselves!

  If you believe that Dell Technication is also involved, you may call Dell and ask another medium or ask them abuse report and when you contact Dell, you have the file number and you can use it to complain. Also, it could be going since you had call before contacting Dell.

  In this case you can take a look at:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

  In addition, how did get your phone number and the name, there are several possibilities, take a look at:

  http://cyberdefend.WordPress.com/2011/09/10/i-have-your-phone-number/

• Dell Inspiron 1501 - problem with 8 GB of RAM

  Please help me:

  I had 2 x 2 GB Apacer RAM sticks, I wanted to switch to 2 x 4 GB Crucial. But after starting, I had problem with the noise and the lines on my screen...  I also tried 2 + 4GB mode, everything works fine, but reference Everest has shown not as good results in 2x2gb mode. What should I do to make it work with 8 GB of RAM?

  My specs are: Windows 8 Pro 64-bit, 263 BIOS, AMD Sempron, 2000 MHz, 480 GB of SSD Kingston, ATI Radeon Xpress 1150, last possible (10-2_legacy_vista32-64_dd_ccc) graphic card driver

  No, there are a few users of Inspiron 1501 with 8 GB here in this forum...

• Dell Precision T3600 problem with feedback headphones

  Hi all

  I recently acquired a new Dell Precision T3600 (in January 2013). However, I got a problem with your comments when I insert earphones into the headphone jack on the front of the office. The noise can be described as a sizzling/humming noise that is loud to the point that it is too distracting to listen to the audio through it. You can hear in the headphones, however, comments are always present and distracting. I also used several different headphones to exclude that, as the problem.

  I'd love to hear from others if it is a common problem with this system. I've read elsewhere that it could be a problem with the graphics card from NVIDIA, but I'm not sure.

  Kind regards

  Shaun.

  Some components of the system:

  -Intel Xeon CPU E5-1603

  -OS Windows 7

  -Graphics NVIDIA NVS 300

  This should answer your question.

  http://en.community.Dell.com/support-forums/desktop/f/3513/t/19466580.aspx

  I just got a T3600 and will contact them to get the front i/o Panel replaced.

• Pool pane there problem with long sql query?

  Hello

  I use Jdeveloper 11.1.2.2.0

  In the application I'm developing, there is a long sql query to call (it's a function from a package, which may take a few minutes to run) and I want to display a progress bar for the user.

  The progress bar component is a "progress indicator" and the percentage of achivement is refreshed by a component 'pool' with 1-second interval.

  The two components are connected in a javabean.

  The function with the sql query is the javabean too.

  To run the sql query that is long on background I am calling from a thread, and the pool component get the advancement of the percentage of a pipe filled with the sql function.

  If the function to run is just a long loop of java operations the progress bar works fine, but if I put my long sql query instead, stop listener pool should be performed to stop long, s sql queryo progress are updated only at the end of the long sql query.

  You have any ideas?

  Thank you

  Thanks for your replies. Unfortunately, it was not the solution to my case, sql procedures to block the entire application while ADF awaits them at the end...

  To solve my problem, I finally used a PL SQL Job to call my sql procedure (dbms_job.submit).

  The application is released right after the call and the component of the pool is not more secure!

  Kind regards

  Yann

• Problem with migration SQL Server Oracle 11.2 2012 DB using SQL Developer Migration workbench

  Hello

  I have a problem when migrating SQL Server Oracle 11.2 2012 using SQL Developer Migration workbench, hope that someone had the same problem before and can give same advide...

  I use SQL Developer Version 4.0.1.14 and Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0. and last jtds - 1.3.

  I created the schema migration_repo, privileges, connected to the third part of Db (SQL Server) and begin a trial with assistant. In the first step of the model to Capture, I get the message from the:

  "Company Capture Capture failed.  Refer to the table MIGRLOG in the repository for more details ".

  But MIGRLOG is empty.

  Here is my log:

  <? XML version = "1.0" encoding = "windows-1252" standalone = 'no '? >

  < Log >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  < level > SEVERE < / level >

  oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil < class > < / class >

  < message > Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doOnlineEnterpriseCapture(FullMigrateTask.java:758) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doCapture(FullMigrateTask.java:601) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:400) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:314) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:147) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193) < param > < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ (RaptorTaskManager.java:554) < param > RaptorFutureTask.run < / param >

  java.util.concurrent.Executors$ (Executors.java:471) < param > RunnableAdapter.call < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615) < param > < / param >

  java.lang.Thread.run(Thread.java:744) < param > < / param >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@68e69a < param > < / param >

  < exception >

  < message > oracle.dbtools.migration.workbench.core.ui.FullMigrateTask$ FullMigrateTaskException: Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 758 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 601 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  line 400 > of < < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 314 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 147 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTask < class > < / class >

  < line > 193 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask < class > < / class >

  < line > 554 < / line >

  < / framework >

  < frame >

  java.util.concurrent.Executors$ RunnableAdapter < class > < / class >

  < line > 471 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor < class > < / class >

  < line > 1145 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor$ Worker < class > < / class >

  < line > 615 < / line >

  < / framework >

  < frame >

  java.lang.Thread < class > < / class >

  < line > 744 < / line >

  < / framework >

  < / exception >

  < / recording >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  WARNING < level > < / level >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  <>error message: ORA-06550: line 1, column 14:

  PLS-00201: identifier ' SS2K5ALLPLATFORM. STAGECAPTURE' must be declared

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  : FAILED: Database Migration: FAILURE < / message >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@1e2c9b99 < param > < / param >

  < / recording >

  I try with model db (DB empty, just a single table), but the error is same. However, if I try to copy the acronym tabele from SQL Server to Oracle it works fine...

  I guess it's something with the configuration, but beacause I am new in Oracle still have no idea...

  Any help would be much appreciated

  I thank in advance

  Stefan

  Hello Stefan,

  did you create the repository Migration of your database to Oracle (Tools-> Migration-> repository management)?

  The SS2K5ALLPLATFORM package is usually created when you add the migration of the Oracle database repository and it contains the function StageCapture.

  So please make sure that you have created a repository of migration in an Oracle database and associate it with the first step of your migration.

  -Klaus

• Problems with Oracle sql developer

  Hello
  
  I have problems with my Oracle SQL developer 3.0.04 Version. It makes windows unstable once the query tries to display too many rows of data (for example, 300 k). Is there a way to solve this problem in addition to increasing the amount of physical memory? I currently have only 1 GB of RAM on this machine. Thank you.

  Hello

  Upgrading hardware can be a very satisfying experience, especially as it is almost always little expensive compared to the value of your time. Virtual memory / paging on the Windows and PC hardware is a huge disappointment, so more memory on Windows is a cure-all. With more and more common 64-bit operating systems, laptop computers and the PC is currently available with 8G of memory.

  That said, I think few users have a business case for the visualization of the hundreds of thousands of lines via a graphical user interface.

  Getting back to what concerns the management of memory in java, I want to put in a plug for the garbage and first new Garbage Collector. It will be the production in JDK 1.7, but can be found in the JDK 1.6 u14 & high in experimental option. The most recent revision update, the better it is. Just add something like this in your sqldeveloper.conf file:

  AddVMOption - XX: + UnlockExperimentalVMOptions
  AddVMOption - XX: + UseG1GC
  AddVMOption - XX: + G1YoungGenSize = 25 m
  AddVMOption - XX: + G1ParallelRSetUpdatingEnabled
  AddVMOption - XX: + G1ParallelRSetScanningEnabled

  It does a much better job of actually release unused memory in the context of the o/s.
  To learn more on this subject: http://www.oracle.com/technetwork/java/javase/tech/g1-intro-jsp-135488.html

  Gary Graham
  SQL DeveloperTeam

• ODI 12 - problem with LKM SQL for Oracle

  Hi again,

  Three days ago, that I asked about the problem with the data types of data warehouses in models that were missing. After you apply the ideas suggested by Rita (thank you very much ) I got from their work.

  But after that, we came across a new problem. When you run a mapping (Oracle for Oracle databases), it failed on the second stage - ' "work table create. "When we checked the generated code was something like this: '(" CREATE TABLE < work_table_name >). None of the names of columns or data types have been described in parentheses and as expected, the ODI execution error was "invalid identifier". It seems that API odiRef.getColList(params)%> does not work. I tried loading using LKM Oracle Oracle (DB LINK) but once again the columns are missing in the generated script.

  I have to mention the master and work repositories are different databases from Oracle and ODI Agent is not installed because of some problems.

  We are still beginners of ODI and would appreciate any help from more experienced guy (or other beginners).

  Thank you in advance.

  Just by chance, we found the soluton today!

  The reason of missing generated code was that the description of the types of data was not entirely cofigured.

  We found that the fields "create table syntax" and "'syntax of data accessible in writing' in each type of data in the topology definition were empty." After filling them, the generation of the script is running properly.

  Before that we had problems with missing data types in models and we realized the reverse engineering of the types of data, but obviously it is insufficient.

  Thanks to all those who participated in the discussion and tried to help us!

• Do not understand the problem with My SQL...

  Greetings! Having a bit of a weird problem here...

  We update a Web site that uses forms and a database, and we did this once a year for the last 3 years. The man who worked on this subject before me created the elaborate together thing and then it died while he has put us in an awkward position... In any case... We have this form of quotation, and when the people, fill it out and click on submit, the information is sent to us and we fill then his quote based on the information the customer provides and then send us the quotation to the email they provided in the form. All this is done to a "base". OK so now when I fill out the quote form myself as a test and clicking on send, it says this...

  Warning : mysql_connect() [Function.mysql - connect]: Unknown MySQL server host 'duser1.db.7927716.hostedresource.com' (0) by /home/content/76/12767976/HTML/backend/configHR.php online 7
  can't do

  
  

  
  

  
  

  So by the looks of it, something is wrong in MySQL, am I right? It's something that I know much, but something is not communicate it would seem. He has never done this before.

  
  

  In case you wanted to know what it says in 'configHR.php, it contains these lines of code... ".

  
  

  <? PHP

  $host = "duser1.db.7927716.hostedresource.com";

  $username = "duser1";

  $pass = "Dosaur1";

  $database = "duser1";

  mysql_connect ($Host, $username, $Pass) or die ("cannot do '");

  @mysql_select_db ($Database);

  ? >

  I changed the names a little bit, so I don't understand our account...

  Now, it is important to point out that it recently had to change the user name ftp and password with GoDaddy to make changes to this website via Dreamweaver this year. Don't ask me why, they just made to us, and once we reconnect to the site with the new user name and password, this problem started occurring.

  So, what do you think?

  Thank you very much.

  Seems to me that there is a problem with your connection to the MySql database.  If the former web developer used old fashioned MySql connections and your server has been recently upgraded to PHP 5.5, which could explain the gap because the MySql connections are no longer supported in PHP 5.5 +.  To confirm this yourself, create a new page test.php with the following code and download on your remote server.  Then view the results in your browser

  phpinfo();
?>

  Nancy O.

• Reference Dell Eql SANDRA use only not all configured NIC

  Have 1 virtual (in hyper-v) server with 4 NICs. Server OS Sp1 with EQL ASM Win2008R2 is version 4.5. The lan NIC is excluded by subnet in auto-snapshot manager/MPIO settings.

  3 SAN adapters are in a different subnet and are "inclusive". The 3rd nic has no active sessions to the storage group. Tab connections ISCSI MPIO confirms its authorized to connect to the San. Instead of 3 connections to the volume on 3 network cards, he made 2 connections to 1 etc...

  I tried the EQL ping to IP configured for that particular network interface card, got no response. The 2 other IP's ping requests. Checked the Hyper-V host; The NIC 3 are in the same Vlan. This virtual server is the only one connected to the San with this problem.

  Any ideas on why and how to solve this problem?

  I was talking about the specific cable and port associated with this NIC there could also be a bad network card.

• New Dell Inspiron 1764: Problems with signal low connection to wireless networks.

  I have a new laptop Dell Inspiron 1764 I received on 25 June. It is "replace" a Dell Inspiron 9100, who has learned to be too slow and too bulky for my needs. For the purposes of support, the two laptops are running on Windows 7.

  Overall, I love my new Inspiron 1764. However, I noticed the connection/signal strength seriously degraded, with wireless (Dell Wireless 1397 WLAN Mini card) card, compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

  In areas of my home that my 9100 can obtain the power of the complete signal (5 bars), my new 1764 bars 2 or less. This behavior is not as limited to only my house as I have tested in my work and in an area of less than 10 feet away from the wireless router, I have 'Internet connectivity problems.

  I tried twice this morning talk with Dell technical support. The first person I talked to tried to be helpful and initiated at least a DellConnect session with me so that he can check out some of my settings and such (However, why they went twice in my sharing settings I could not determine as they have absolutely nothing to do with the intensity of the signal).

  Unfortunately, I was disconnected from the session when I went to a place that had less signal than just next to my wireless router.

  I then go on the chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked to the top of my support contract.

  They then told me that my warranty does not cover software issues and referred me to the software Department and said it would be a supplement. I told them that I did not believe that it is a problem of software in any way, shape, or form. They told me that it must be a matter of adjustment. I spent several hours scouring the internet forums on Dell and other sites check those who have had similar problems. Some of their questions were certainly the software settings, but I still don't yet to find anything that tells me I have an incorrect setting of software.

  So far, I'm standing in my kitchen, tapping on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 is sitting next to me with a skinny 2 bars, and I am literally standing 7 feet above the room which houses my Linksys WRTU54G-TM router.

  Personally, I suspect a faulty wireless card, but how to convince Dell to hear my case and replace it instead of trying to bilk me for support of useless software?

  I hope Dell Tech Support bed actually this post, or people with the same problem can Dell refer to my previous post describing the problem and the fix.

  It IS a PROBLEM of MATERIAL WITH the ANTENNA, AND VERY PROBABLY THE DIFFERENCE BETWEEN a DECK CONNECTION at the ANTENNA of the PLATE, from connections TAPE FOIL INDIVIDUAL at the ANTENNA of the PLATE, THAT DELL MUST HAVE RESPONSE BETWEEN WHAT MINE PORTABLE has BEEN CARRIED OUT AND THE SPARE ROOM WAS MADE. THE PROBLEM IS NOT SOFTWARE, PROVIDER OR ROUTER, IT IS THE PLASTIC WITH THE ANTENNA CASE!

  Dell is in fact losing more money with the hours of technical support through software patches and sending technicians with new wireless cards that does not solve the problem. They need to send and replace the plastic case behind the LCD screen with the updating of antenna and connections.

  Good luck!

• Problem with PL/SQL variables...

  Hi, I am fairly new to this, so apologies if this is a simple question.

  I have a text field on my page (ENTITY_ACC_NO), and I'm putting a pl/sql block on it to fill with a conditional piece of treatment based on the value of another field (ENTITY_SELECT). (Its actually a drop-down list)

  
  

  So on the source of the article, I updated the source type the body of the pl/sql function with the following code piece...

  IF: ENTITY_SELECT = '%' THEN

  : ENTITY_ACC_NO: = ";

  ON THE OTHER

  Select account_no in: entity_acc_no of the entity where entity_id =: entity_select;

  END IF;

  The problem is that it does nothing... Firstly, I correctly use variables? I read somewhere that you should use the function of V, but it also seems like you use this for stored procedures, rather than a simple pl/sql.

  Either way, im actually trying to work around the error as the drop-down list has '%' in it for another database query text, and I use it here through its primary key to retrieve other information about this...

  Thank you very much

  Richard

  Source of the element is used when rendering a page - looks like you can expect as things change when a selection list option is specified.

  Discover the use of dynamic actions

  http://www.grassroots-Oracle.com/2013/10/Apex-101-dynamic-actions.html

  The other thing that I can see is the page elements, you specify is not a page number of prefix, which is worth questioning - you specify the name and why you use the conventional notation P1_ITEM_NAME?