Reference Dell optiplex usff 760 nothing appears on the monitor

Similar Questions

• Satellie A200 - nothing appears on the monitor

  Hello world
  I have a Toshiba Satellite A200.
  I connected to a desktop computer monitor. And I'm going to monitor my (laptop) true of "Windows Mobility Center. I mean, only showed the big monitor (of office). It worked well, for 3 or 4 days. And yesterday, I was not at home. My father did something to my laptop
  and now, the laptop monitor is turned off (as usual), but there is no image on the desktop monitor, also. So, I see nothing. If I could see something, I can open the windows Mobility Center and set it to the default value, but, as I said before, I can't open Mobility Center, because I see nothing...

  Does anyone know what should I do?
  Thank you...

  PS: Sorry for the bad English...

  Have you tried to pass between the monitor with FN + F5?
  Try this!

  You see to start something on the monitor?

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• Tecra A2: Nothing appears on the projector screen

  Model: Toshiba Tecra A2

  Problem: Laptop is wired to a projector using the VGA port on the back of the laptop.

  When we try to playing a DVD or mpg video on the laptop the video play as usual on the laptop, but nothing appears on the display of the projector. Windows Media Player is visible on the projector, but no video image.

  The laptop has a video on the port on the back of it, and I guess that's where the laptop sends the video - but we do not want to use this - is it possible to get the video playing on the vga port?

  Thank you

  Hello

  The first change to the projector by using the FN + F5 key combination. After that, start the DVD or any other video file. I had the same problem if the laptop is connected to the TV. If the DVD work that it was not possible to see on TV.

• I chose "keep files" before deleting a user profile but nothing appears in the saved folder?

  When I deleted a user profile, I chose to "keep files" and a folder has been created and saved to the desktop on the Administrator profile.  However, when I opened this case nothing appears?  The properties of this reflex folder with precision the size of the files that have been saved (20 GB), but nothing appears when I click on the folders.  This is especially of music and images.  How can I get these files that are obviously there?

  Well, I'm a fool.  Click Documents, select the icon organize in the menu Tools, drop down to folder and Search Options, click view, click on the box that says "show the hidden files and folders". Click on apply. Click OK.  FACT.

• The box at the top right shows that I have an unread message, but nothing appears on the list of received messages. .

  The box at the top right of the hotmail page shows that I have an unread message, but nothing appears on the list of received messages.

  Hello

  The question you have posted is related to Windows Live Hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  http://www.windowslivehelp.com/

• When I start my computer Windows 7, it starts but nothing appears on the screen.

  Original title: startup problem

  Hello.

  When I start my computer win 7, it starts (fan starts, dvd disk drive turns on, lights on the Tower of keys on and even usb ports give power IE can charge my phone by usb cable), but nothing appears on the screen (empty, nothing, does not react)

  However, after you restart the computer several times active and computer screen display works fine without problems.

  This problem occurs only when I turn on the computer after having completely off but does not happen when I restart using the option restart.

  I'd be suspicious of an imminent hard drive failure.  Download and run the program tester for the manufacturer of your hard disk drive.  Give me the model number of your player (Device Manager), and I'll give you the link to download. At least, you have to exclude this possibility before you spend a lot of time trying to re - build.

• Nothing appears in the Recycle Bin after deleting files

  Original title: Recycle Bin problems.

  Hello

  I had a problem with my computer,

  When I delete something, nothing appears in the Recycle Bin. It'll be great if you guys have a solution.

  Thank you

  Check the properties of the Trash because it seems that you have defined a permanent DELETE option

  https://support.Microsoft.com/en-us/KB/320031

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• try to do a slide show... pictures do not appear in the monitor while playing

  try to do a slide show. I imported several JPEG files and they appear in the media folder. If I double click on one of them in the media folder, they appear in the control screen, but when I drag them in the video timeline 1 they do not play.  the screen is blank. If I double click on one of them in the timeline that they appear in the monitor, but when I play them that nothing shows in the monitor.any idea why they don't play. ?

  Thank you

  Win7 64

  PreEl10

  Thank you whsprague... got it fixed... it's that darn... Nvidia driver problem somehow my computer for video driver updates without knowing me it... lol... and I found the driver may 2013, installed and everything works well again...

  Thanks for the help

• Not supported input message appears on the monitor

  "Input not supported" message appears on the monitor whenever I try to watch a DVD or video stored on my hard drive

  What could be the cause of the problem? The monitor is an Acer x193w. I got this computer for over a year and I've never been able to watch a DVD in its entirety because after so long as the message arrives and the only way out of the said message is to manually cut the power goes to food. I tried the alternative media such as VLC players to see if it works, but it seems to be something else the cause. This happens only when I run the videos that have a considerable length (20 minutes or more)

  Hi CheerleaderMelissaFan,

  Through my research, I noticed that users with similar problem have solved this problem by changing the screen resolution, I suggest you to change the display resolution and make sure that the refresh rate is adapted to your monitor.

  Follow the steps mentioned in the link below

  Screen resolution-change

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

   

  Change the refresh rate

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  (You can see the documentation for the monitor to the native display resolution and refresh rate)

  Now test to see if the problem is resolved, after back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Premiere 6.5 - Why is my video not appearing in the monitor window

  I have a compressed .avi clip that I imported into my project file in Adobe Premiere 6.5. I did slide the clip on my calendar.  In the clip window, this one appears fine, but for some reason any, it will not appear in the monitor window.

  How can I do to fix this?

  Thank you

  This Xvid CODEC will probably never import and edit properly.

  Go to the source material, before the Xvid compression, or convert to DV - AVI (if SD material) and that importation.

  Take a look at this ARTICLE on AVI (and other formats) as a 'wrapper '.

  Good luck

  Hunt

• Dell OptiPlex 7010 (mid-2012) /comment connect 3 monitors.

  Hi, I try to connect three screens: two via the display, either via VGA, but does not! (Only 2 monitor VGA or DISP + DISP, DISP)

  Configuration:
  Dell OptiPlex 7010 (mid-2012)
  VGA: Intel (r) Graphics HD 2500 (Video_Driver_JVC00_WN32_10.18.10.4176_A17)
  BIOS: A20 (O7010A20)
  CPU: Intel (r) Core i5-3470 CPU @ 3.20 GHz
  S/N: F0MCS42
  Dqstayn: ADMIN NOTE: maintain the label removed by privacy policy >

  The CPU is supposed to support three monitors simultaneously, but maybe the BIOS does not support?

  In any case, many third-party video cards will support three monitors.

• Drag / move in libraries and nothing appears in the library

  I opened a document in illustrator and drag and item in the library and nothing appears in my library panel?

  Hi Ausmack,

  This is a problem known to the Illustrator team with a certain configuration of operating system (studied at the moment) the behaviour of drag - move in the design in artificial intelligence Library Panel does not work.

  Until then, you can try adding the asset using the buttons/icons that appear at the bottom of the Panel "libraries."

  Thank you best regards &,.

  Rambour