Reference Dell T300 RAID additional Install

Similar Questions

• Reference Dell T300 RAID 1 broken by the firmware update

  Hello

  We have a Dell T300 with the SAS 6/iR adapter.

  We have a RAID1 with 2 x 3 TB drives (visible only 2 TB).

  I have updated the firmware on the SAS adapter to the latest version available here:

  

  and now the RAID 1 has disappeared!

  We have a lot of important data on this virtual drive so any help would be appreciated.

  Thank you!

  Jerry.

  Hi Josh,.

  Thanks for getting back to me. The physical connections and the disks were good and they appeared in the update controller RAID configuration. But the virtual drive RAID1 had disappeared.

  I solved the problem by downgrading to an earlier version of the firmware.

  If I had read the README of the first firmware upgrade page completely, I would have noticed:

  The migration of the SAS 6/iR controllers PERC6 controller RAID Volumes is only supported for volumes created originally on 6/iR controllers SAS running review FW 00.25.47.00 or later version.

  I was able to locate a FW version 00.20.48 here.

  The executable flash.bat refused to downgrade the FW version

  However, looking at the .bat files, I could see that flash.bat called xflash.bat called sasflash.exe which is a LSI utility to upgrade the firmware of the card.

  I found an old manual with the arguments that sasflash.exe take here and use the switch - fwdown to wipe the card and firmware downgrade.

  When the server has started upward the virtual drive was back. Phew!

  Guess I'll read the Readme next time?

  Thank you for your attention,

  Jerry.

• Reference Dell upgrade package cannot install the dell wifi driver

  Hello

  Since I reinstalled Window8 in my inspiron 3138, the laptop can not install the upgrade package from dell"and can not install my wifi driver.

  I can not install the following drivers and the laptop cannot detect WiFi at all.

  1704 Wirelss Dell Wifi driver (Network_driver_342TP_WN32_7.35.333.0_A01)

  Driver for the mod aircraft Dell (Network_driver_PX8MM_WN64_1.0.0_A00) switching

  Do you know how to solve this problem?

  Best,

  Lucy

  Please let me know which operating system you currently have on the computer. It's 10 or windows 8.1. Because the version you are trying to install is for windows 10. Also please go to Device Manager and confirm the card this wireless network adapter option.

• Reference Dell R610 RAID, virtual disk more problems of 1800 GB

  Hello community,

  I was frustrated by my attempt at installing VSphere 4.0 Update 2 (or 1) on a virtual disk on a SAS Perc 6, which is more than 1 800 GB in size and I was wondering if any of you have had similar experiences and how you have handled THIS.

  Unfortunately this system will use internal to the storage drive as it will be in a remote location.

  Any help is greatly appreciated

  Thank you

  Brian Wing

  Calix

  Break your table into smaller pieces. ESX requires a minimum of about 10 GB, even if you can make bigger it. ESXi requires only 1 GB. Data warehouses may not be less than 2 TB. You may be able to use virtual disks raid based to break the table.

• Reference Dell digital delivery not installed and cannot download support

  I'm trying to get the software that I bought with my new downloaded Dell (Adobe Photoshop elements).

  It was not installed on my PC at delivery, and I contacted the support. They notify installation Dell's digital delivery to get it, but when I go to the support site and enter my serial number as advised, Dell's digital delivery does not appear as an option. Help! I need digital delivery of Dell to download my software, but I can't download or access the software Dell digital delivery real itself! Able to help write and suggested that I use a telephone support, just tried to call them to find their Saturday and Sunday closing (really!?)

  Any ideas or suggestions on how I can install Dell digital delivery?

  Hi mxcuk,

  Thanks for posting your request on the Dell Community Forum Office client for protection. I appreciate the opportunity to answer your question of digital download.

  Although I am not technically inclined (this forum is for non-technical issues) I was able to find the following link which may be able to guide them through this process.

  www.dell.com/.../dell-digital-delivery.

  I hope this information is useful,
  Lorna

• Reference DELL 510 RAID 5 - missing 2 HDD (1 foreign)

  Good evening everyone,

  This afternoon I did some research on how to put my 2 TB HARD drive to 4 TB of HARD drive on my RAID 5 of 6 HARD drives.

  To enter the configuration, I noticed that two of the six disk HARD saying missing then in the Ctrl Mgmt tab one of the HARD drive said foreign.

  How to fix this?

  Thanks in advance.

  Dan

  The Setup is:

  2 x 300 GB RAID1

  6 x 2 TB RAID5

  Two of the RAID5 HDD reported missing, one of the two foreigners.

  So I've gone on foreign view / highlighted the top level config / foreigner / option Yes or no (yes some)

  On which dates back to the first page "Mgmt" it then one of the missing disks on 'ready' and the other ' rebuild '.

  He runs out of night to see what happens. Will update.

• Reference Dell Perc 6 ESXi T300

  I try to install ESXi on my dell T300. I have 4 hard drives on a raid Perc 6 controller, and I created a 5 to 2 TB raid array.

  I have advanced and installed ESXi on drives and connected with the client of the infrastructure. I try to add the storage remains in the system, so I can start putting a few images there.

  However my problem is the storage not appears between 26 and 45 GB when I added it to the system. When I try to add storage, capacity is listed as 2.05 TB but Availalble space is limited to 45,64 GB. Is there something I am missing with this?

  Thanks in advance.

  Welcome to the VMware community forums.  ESX (i) have a limit of 2 TB LUN.  With ESX it will used the first 2 TB and ignore the rest, but with ESXi for some reason, it ignores the pieces of 2 TB and use the rest (0.05 CT in your case).  If you re-create the matrix 2.0 TB - 512 B you will be able to use the total amount of storage.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Reference Dell 3110cn of Laserjet + os El Capitan

  My MacBook Pro (2009) stopped my Dell printer. News on this please.

  Hi deaconjo,

  as I had the same problem, I found a solution for my El Capitan MacPro 2008:

  Search for the following installation program:

  3130cn_Installer_And_Application_Dell_A04_MAC.dmg

  Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:

  Reference Dell 3130cn Color Laser v3017.104 PS

  With this driver installed, I can use my printer Dell 3110cn without problem.

  Perhaps it might help you too.

  Concerning

• Reference Dell E6420 randomly not SSD detection at startup

  Specifications of the computer:

  Dell Latitude E6420, Intel Core i5 2520 M, 2 x 4 GB = 8 GB of RAM, Nvidia NVS 4200 M, 250GB HDD, Win 7 Pro 64, Bios A23

  The value of operation SATA AHCI and not quick start. I have 3 of these computers. They are all out of warranty.

  I replaced the original 7mm Hitachi 250 GB for the Intel 535 240 GB SSD HARD drive.

  I used Acronis True Image 2016 to clone the hard disk SSD. Cloning process is very much like on any other computer.

  The problem is that each cold 4 or 5 boots the computer cannot find the SSD drive. Restarting the computer solves the problem of that time. I have to find a solution. I want to sell them with a SSD and not with a HARD drive.

  I tried the things:

  Update the Bios of the A14 to A23.

  Put a spacer of 2mm on the SSD and of course the resettlement of the SSD.

  Exchange for another Intel 535 120 and 240 GB.

  Clean install of windows I knew was a waste of time because it does not affect the BIOS does not detect not things.

  Googling the problem for hours.

  Call dell?

  Use another brand of SSD? He probobly won't make any difference to look at other threads.

  Use a HARD drive? Last resort. I can't stand slow hard disks regularly.

  Reference Dell E6420 seems to work with a Samsung 850 Evo 250 GB instead of the Intel 535 very well. Tested over a period of 3 months with no problems. Threw 535 readers intel in the desktop instead.

• Pre-installed Vista CD computer Dell laptop allows you to install Vista on another computer of dell desktop originally pre-installed with XP?

  Hello.

  Have an old dell desktop with XP.
  Have a new computer dell laptop with Vista.

  Both came pre-installed.
  Both came with a CD to reinstall Windows.

  Am I allowed to install Vista from that original CD on the desktop?
  I did, then you have the problem (not genuine copy of Vista). I have since reinstalled Vista, but before I completely setting up the office, once again, I want to make sure that I am able to do this (do not want the new not genuine error).

  Specific questions:
  1. am I allowed to use portable CD to install Vista on another computer?
  2. If so, that must be done to ensure the "not genuine" error can't?

  Thanks for any help.
  Shawn

  N °

  Reference Dell binds their records to their motherboards.

  If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  And a Vista license = a Vista Installation.

  See you soon. Mick Murphy - Microsoft partner

• Reference Dell A960 printer

  I'll upgrade to a new computer Windows XP 8.  My Dell A960 printer work with Windows 8?  I checked for Dell drivers and they are only available up to XP.  Windows 7 and Windows 8 are not available.

  Thanks for your help Pudgy!

  sevenzz,

  There is not any Windows 8 drivers for this printer.

  You can try this, it may or may not work...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell A960 All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If you do not install an antivirus program, Windows Defender will be the default virus program. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Reference Dell 968 AIO, Windows 7 on Dell Studio XPS - messed up

  I have a Dell 968 AIO which was printing on the use of pilots (probably the original) on my Dell XPS Studio 8000 Win 7 pc, a week ago. He stopped printing a few days ago.

  I assumed the problem was the drivers and not the ink. So I tried to install the new drivers. It does not solve the problem. Indeed, the new drivers would not install completely. When he got to the last step of the installation the Setup program just hung. More on this in a minute.

  I bought new ink cartridges and allowed me to test the 968 printer and it prints very well now.

  However, when I tried to print a document from the computer.

  I tried to uninstall the old drivers and reinstall new drivers. Unfortunately, I got the USB cable is plugged. So I have messed up, and it would not print. He could not "locate the file. I tried after I unplug the USB stick and a running registry cleaning. Still no luck, but worse, I noticed that the installers had left a lot of luggage around.

  • There is a folder c:/dell/drivers/986, which seems to have a lot of the old drivers.
  • There was a folder c:/program files (x 86) /Dell AIO Printer 968
  • And there is also a folder c:/program files (x 86) (x 86) /Dell 968 AIO Printer.

  I followed the steps for a clean uninstall, and it is where I am now. However, there a lot of carrying files around in Dell matter folders on my hard drive.

  I'm sure I made a complete mess of things, can anyone help?

  Wendy

  Wendy,

  When you reinstalled the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Once you have corrected, then we can work on the printer.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 968 & 968w all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick