Reference DELL VRTX Shared Storage for cluster

Similar Questions

• Reference Dell VRTX Drive Configuration

  I'm trying to configure a Dell VRTX to 3 blades with R2 2012 Windows failover

  I followed the instructions from Dell to create a Quorum disk (RAID 1) and a shared disk of the cluster (CSV) - Raid 50.

  The issue is, in each Windows host, Disk Manager sees each virtual disk twice.

  What did I miss?

  

  I answered my own question.

  The Microsoft MPIO's feature must be installed as well

• Recommended the Directory Structure of shared storage for deployment of enterprise on Windows environment

  Hello

  I need to install FMW on windows with high availability environment using the storage that is shared in the following way:

  3 windows 2008 R2 servers servers:

  Host1 (Server Admin): gale servers (Server Admin) and EM

  host2 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  host3 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  
  

  Host3 will be Host2 high availability on each managed as cluster based server
  

  
  

  the question is how to design the structure of directory on windows environment, I need best practices
  

  I found in the Linux directory structure "Enterprise Deployment Guide for Oracle WebCenter Content" as follows:

  So how do apply on windows

  

  Hello

  Thank you! All the best. Be careful in choosing to shared storage.

  # If your shared file system accessible via CIFS, SMB or Samba, you may search and/or performance indexing and corruption problems when you use the Verity search engine (not supported in 11g).

  # If your file system shared accessible via CIFS, SMB or Samba, you should disable opportunistic locking (oplocks - data client-side caching) of the file system as it might interfere with the normal operations of Content Server. With solutions for storage network (SIN), the performance of the file system may be closely related to oplocking (data caching client-side), which disables the opportunistic locking can cause performance problems. Please plan your architecture accordingly.

  Please feel free to correct if you get your answer to other purposes.

  Thank you

  Amey

• VRTX Shared storage and vSphere 6.0

  I installed ESXI 6 with ISO next

  VMware-VMvisor-Installer-6.0.0-2494585.x86_64-Dell_Customized-A00

  www.dell.com/.../DriversDetails

  When I go to 'Add storage' in the vSphere client it shows not available drives.

  -J' created virtual disks on the VRTX

  -J' associated 2 blades with one GOING on all disks

  -The VD is in multiple connection mode

  -J' rebooted the host

  Can I get confirmation that the ISO should have all necessary drivers for the VRTX system, using blades M520?

  Did I miss something?

  Thanks in advance

  Eric

  "Can I get confirmation that the ISO should have all necessary drivers for the VRTX system, using blades M520?

  EricNylen,

  You can, ISO custom does not contain the necessary drivers, but the version you download is that permitting the M1000e, not that of the VRTX M520 (as "PowerEdge M520 (for EP VRTX)" line in the compatible systems would be listed "). The version you need is right here though. In addition, you can find a walk detailed on the configuration of the storage shared in the VRTX here.

  Let me know how it goes.

• Reference Dell E6500 & DW5560 drivers for Windows 7 x 64

  Reference driver Dell Update Package supports DW5560 Mobile Broadband Mini Card Reference driver Dell Update Package supports DW5560 Mobile Broadband Mini Card	Recommended	7.2.4.1	19/03/2013	Windows 7 32 bit Windows 7 64 bit
  Version of the driver DW5560 installation program Version of the driver DW5560 installation program	Recommended	7.1.1.1	07/02/2013	Windows 7 32 bit Windows 7 64 bit Windows XP Windows XP x 64

  I tried to download this driver, does not after all, he said: "authentication failed. The Dell Wireless HSPA Mobile a mini card cannot be installed on this computer. Plaease contact Dell support for more information. »

  No solution for this problem :/

  Solution for this problem I have very easy, start the program installation driver, go to temp folder, coppy drivers manual from the temporary folder, the drivers manually

• Reference Dell PowerConnect 2848 OID for CPU time and memory

  Hi all

  This is my first post in this forum. I searched all the messages that can solve my problems, but I could not find so if there is already an existing post and I couldn't find it please guide me to it.

  My case is. We have a few Dell PowerConnect 28xx switches in our network. We want to monitor things like the CPU, the temperature, the use of the RAM usage. We use Solarwinds IpMonitor monitoring tool. I downloaded the MIB, I could find the download of Firmware from Dell drivers and downloads page. I went through the entire MIB, but I couldn't find an OID for the foregoing.

  So if anyone can help me please what OID is used for usage of CPU and RAM temperature it will really help me.

  Please let us know in case we need more information on my side.

  Thank you

  Frank Moreau

  I did use SNMP on the 28xx but here are some various sensor OID, I used for the N-series, as well as some older models Powerconnect.  I don't know if they will work for the 2xxx, but you can try one or two and see if they work.

  N - Series (FW 6.2 and later versions) temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.0
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.1

  62xx (3.0.x.x firmware or later-, some may also work with 2.x firmware)
  Temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

  Are the OID to use CPU for N-Series switches
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (table for the following...)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (index)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (name of the process using CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% CPU used by the corresponding process)
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (cumulation of all the activity of the CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (CPU utilization shows 5 s, 60 s and 300s).

  OIDs memory
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2
  Power supply OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3
  OIDs of fan
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

  35xx (2.0.x.x or later firmware)
  Temperature OID
  . 1.3.6.1.4.1.89.53.15.1.9
  . 1.3.6.1.4.1.89.53.15.1.10
  OIDs of CPU
  . 1.3.6.1.4.1.89.1.6
  . 1.3.6.1.4.1.89.1.7
  . 1.3.6.1.4.1.89.1.8
  . 1.3.6.1.4.1.89.1.9
  OIDs memory
  . 1.3.6.1.4.1.89.29.11.1
  . 1.3.6.1.4.1.89.29.11.2
  P.S. The OID
  . 1.3.6.1.4.1.89.35.5.1.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.3
  . 1.3.6.1.4.1.89.83.1.2.1.4
  . 1.3.6.1.4.1.89.53.15.1.3
  . 1.3.6.1.4.1.89.53.15.1.3
  OIDs of fan
  . 1.3.6.1.4.1.89.83.1.1.1.2
  . 1.3.6.1.4.1.89.83.1.1.1.3
  . 1.3.6.1.4.1.89.53.15.1.4
  . 1.3.6.1.4.1.89.53.15.1.5
  . 1.3.6.1.4.1.89.53.15.1.6
  . 1.3.6.1.4.1.89.53.15.1.7
  . 1.3.6.1.4.1.89.53.15.1.8

  for old firmware - if the 35xx above does not work:
  Temperature
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.9 (Celsius)
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.10

  I hope this helps.

  B

• Reference DELL Modular Disk Storage Manager cannot see MD36xxf because of the version of the firmware to high

  I have a DELL MD3600f that is connected to a DELL R710. The system was all the installation and work programme, but the OS disk has become corrupted and had to be rebuilt. The system has not all backups, because it was still under construction. The problem is that a system administrator updated the Firmware on the MD3600f to the 07.80.41.60 version. According to the notes the versoin of DELL PowerVault MD Series Storage Software Resource DVD 3.0.0.18 or later must be installed before update the RAID controller firmware.

  Problem is the update of the firmware is already in place and the MD storage software cannot talk to the MD3600f now because of the correspondence of Miss firmware.

  No matter how lucky it is a updated software storage MD there? I tried low grade firmware, but that has been denied.

  Why not give the link to the latest version; 4.1.0.88?

  This is available at en.community.dell.com/.../4234.dell-powervault-md-downloads.aspx.

• Reference Dell Inspirion 3521 drivers for Windows 7 (32 bit) - especially VGA (HD Graphics 4000)

  Bought new for laptop Dell Inspiron 3521 i3 clocked at 1.8 Ghz, 4 GB, 500 GB. I'm unable to install the VGA Driver on Windows 7 (32 bit).

  I tried to install the drivers in the order given to the:

  and has also taken guidelines from here.

  http://www.Dell.com/support/troubleshooting/SG/en/sgdhs1/KCS/kcsarticles/ArticleView?docid=545832

  Drivers downloaded from this site, but no luck.

  http://FTP.Dell.com/pages/drivers/Inspiron-15-3521.html

  After you have entered the serial number, I don't see the list of compatible drivers Windows 7 (32 bit)

  http://www.Dell.com/support/drivers/us/en/19/ServiceTag/J3DF1X1

  Read also the below thread but

  http://en.community.Dell.com/support-forums/laptop/f/3519/t/19482222.aspx

  When I tried to download the Intel driver, he said;

  Demoted pilot
  The file you are trying to download is no longer available and may have been updated or replaced by a newer version. Please visit the drivers and downloads page and try your search again.
  When I tried to download the video driver it says
  We're sorry...

  We are currently not able to process your request. Please click the link "back to results Page.

  What should I do? I am comfortable with Windows 7 ultimate (32 bit), but not able to install my VGA correctly. Need solution please...

  

  

  

  Why do you have Windows 7 32-bit?

  The only supported OS is Windows 7 64-bit and 64-bit Windows 8.

  If you insist on using Windows 7 32 bit, you must find your own drivers.

• Reference Dell OMSA Release Date for vSphere 6.0 ViB

  Hello

  information about the release dates for vib for vSphere vsphere 6 (OMSA 7.4.1 / 8.0.1 / 8.0.2)

  Apart from that... OMSA 8 will continue in two different development branches for T630, R630, R730, R730xd and T430/R430/T530/R530/M630... or will it be a next single version for all serversystems of 13 G.

  Kind regards

  Torsten

  Toki76,

  Custom Dell ESXi ISO 6.0 came out 2 days ago. So I guess, from past experience, that the VIB is going to be released very soon behind him, but at the moment I do not see that he launched. I can research to see if I can refine the delivery date well and let you know.

  What about OMSA 8, probably a single version which includes the two branches.

• Reference Dell Customer Integration pack for sccm 2007 sp2

  Hello

  I'm having trouble installing the integration of customer Dell for sccm 2007 sp2 Installer pack to install Custom ACtion.help and then gives the error 2147467261. Does anyone have any ideas on how to solve this problem.  Is the server a sccm 2007 ver 4 is installed on this windows 2008 R2 server

  Any help would be appreciated

  Has raced in mode compalty

• Reference Dell 2407WFP-HC driver for Windows 7 x 64?

  I was wondering if there was a new driver for the 2407WFP-HC has published since the original on 24/10/06 (as shown in my device manager). I've seen several for the 2408...

  Which driver should I I have installed for optimum performance with my Dell 17R with Windows 7 Home Premium 64-bit?

  In addition, I notice a backlight flicker in the monitor. Particularly noticeable in areas of very light gray and colors. An update of the driver would help?

  Thank you

  If your monitor is not in the list of drivers, or if it is present, but not for Windows 7/8/8.1, there will not be a. Windows 7/8/8.1 will load its generic PNP driver for the monitor. The other option is to try to load the driver XP or Vista Windows Compatibility Mode (if available).

• Reference Dell touchpad driver updated for Windows 10 new gesture

  Hello

  A new major upgrade for Windows 10 has been released a few days ago, and the update included a new gesture that allow the user to pass the workstations with 4 fingers on the touchpad and slide between the left or right to switch workstations.

  This new gesture does not work on my touchpad and I guess this can refer to the current version of the touchpad driver is not yet supported in this function because other gestures as three finger swipe to move all open windows and three finger tap to call Cortana are always works well for me.

  I was wondering if there is no update for the driver for the touchpad to soon, or all those were just my own question...

  Thank you!

  CALVINLAU0914,

  Can you give us the model of the computer you have so that I can look for drivers?

• Dell VRTX + vCenter 5.5 + Shared storage is ESXi host import issue in vCenter. Help, please!

  All,

  I have two VRTX to be used for lab purposes that I am currently in configuration.

  Blades feature 4 VRTX with a shared storage infrastructure. Each blade has 5.5 installed on ESXi.

  I configured the shared on the VRTX storage, and all the blades can go very well.

  The question I'm currently facing is when you add the vCenter for managing ESXi hosts.

  Add the first host goes without a hitch. However, add any later host fail, because vCenter finds datastore attached hosts to have the same identifier.

  The error message is (see the attached screenshot): ' Datastore 'Main Shared-storage' is in conflict with a store of data that exists in the data center which has the same URL (ds: / / vmfs/volumes/xxxxx /), but is supported by different physical storage.

  Someone knows how to fix this?

  Thank you.

  Thanks for the reply.

  I think that I have found a workaround.

  First of all, this link does not address my particular issue.

  See, it's a whole new vCenter device installation and configuration. Only one of the four hosts to add host has been added.

  Still, the problem is that each ESXi host is a blade VRTX (M620), which has access to the data store created on the shared storage of VRTX.

  Basically, each host is editing the data store shared even (the only data store created on the shared storage), which works very well except for vCenter complain when you import the hosts.

  In any case, my resolution was as follows:

  -Add the first host with the attached and mounted data store

  -Remove the data store and detach the controller shared by other guests before adding in vCenter

  -Re-attach the controller shared and set up the data store via vCenter once guests have been added

  -Re-configure each host for vSphere HA if necessary

  Thank you.

• VMotion for one HA cluster to another - no shared storage

  I was trying to vmotion that two hosts and clusters of data from a virtual computer store between HA (no shared storage). The web client gives me this warning and I'm curious to know what he is talking about:

  **

  If this is done, the virtual machine will lose vSphere HA protection. If you proceed with this operation and it completes successfully, vSphere HA not will try to restart the virtual machine after a subsequent failure. vSphere HA protection is restored when network partitions or disk accessibility problems are solved...

  **

  HA is working in two groups, in terms of network and the heartbeat data store. So what exactly this message tells me thank you!

  I get the same warning when turf migrate a virtual machine between two clusters and I select the source host unreachable destination data store. If I select a store different data that is shared by the two poles of competitiveness, no warning appears.

  This warning is probably up for the vMotion suppose it will stay within the same cluster and check if the source host and destination can access the same data store. As the store of data (and config agent HA) is not shared between your source and destination hosts residing in different groups, it seems that the vMotion compatibility check guess it's a store of local data or something like that.

  However, once migrated to the new cluster, FDM HA agents should choose the new VM place very well and protect it according to your settings in cluster HA, so nothing to worry about here.

• Migrate virtual machines from HP G7(single host) for HP G8 (Cluster) without shared storage

  Hello

  I have 2 esxi host (hp dl 380 G8) and put them in a cluster and other host esxi (dl 380 g7) and I have no shared storage and use local disks just now I must spend my VM G7 server a cluster of the G8 but I want to know I can join my cluster g8 g7 and migrate web vmware machines without any downtime?

  I want to know can migrate without downtime with localdisk? I have no shared storage

  Best regards

  BAbak

  can I join g7 to my cluster of the g8

  You can mix into clusters hosts all desired, even Intel and AMD at least that you enable EVC on the cluster (of course, HA or DRS require shared storage compatible/CPU). However, you need not to have even just cluster hosts to migrate virtual machines through vMotion between them.

  migrate web vmware machines without any downtime?

  Don't know what this "web vmware' but yes, because ESXi 5.1, you can use"enhanced vMotion"to live migrate virtual machines without service interruption from one host to another, even without shared storage:

  Migration with vMotion in environments without shared storage

  The usual vMotion requirements apply. Also you can only live migrate virtual machines from the old host to the new hosts because of different generations of CPU (and back as long as you don't have bike powered virtual machines on new hosts).